How many thicknesses are there for American shellfish flooring? Is it related to the price?

Floor laying knowledge 10 items of floor heating floor paving 1. Be sure to find a construction team with professional knowledge of floor heating. "Three points of flooring, seven points of installation", the effect of the amateur decoration team is self-evident.

2. The tightness of the floor heating system must be checked before paving.

3. The ground must be dry (it can be judged by experimental phenomena), and the moisture content of the cement floor should be lower than that; The indoor humidity should not be too large, regardless of whether there is geothermal heating, the ambient humidity is about 60 degrees before and after installation.

4. It is strictly forbidden to nail the ground during construction. After the construction is completed, nailing is also prohibited on the ground to prevent damage to the heating coil.

5. Before laying the laminate floor, the EPE composite film should be laid (the EPE composite film must be marked with the special words of floor heating radiation) to isolate the moisture and release the moisture from the surrounding baseboards.

6. The keel should not be laid. The low thermal conductivity of the air will affect the heat dissipation effect and may damage the pipe.

7. When the floor is laid, it is necessary to use the special glue for floor heating to increase the use time and effect, and this glue basically does not have to worry about the emission of harmful gases.

8. Leave enough expansion joints between the floor and the wall, and use baseboards that are thicker than the current general floor.

9. The paving of the ground and the installation of the baseboard should be divided into two constructions. 48 hours after laying the floor, wait for the glue to dry completely, remove the fastener and then make the baseboard.

The thickness of parquet is generally 12 mm and 15 mm (the cost is slightly higher, the foot feeling is slightly better, and the ** is slightly expensive), which belong to the normal specifications

Laminate flooring is divided into laminate flooring and parquet.

Laminate flooring slightly.

First, focus on parquet.

The main advantage is that the surface is made of precious trees as the surface layer, which is beautiful and noble;

Since its listing, the main selling point of solid wood composite has emphasized its stability, in addition to the grade mentioned above; Because of his special structure, which is generally more than 7 layers, and adopts a criss-cross bonding mode, it is not easy to deform, and it is also a very good choice for geothermal heating;

Brand service, after 2006, the development of multi-layer solid wood to a relatively new period, many large brands of composite flooring, solid wood brands have successively launched this kind of flooring, such as nature, holy elephants, Fillinger, Hongnai, etc.; So I think parquet is the trend of the future;

2. Solid wood parquet can be divided into two kinds according to the structure, one is three layers of solid wood (three layers: a layer of precious hardwood with a surface of 3-5 mm).

One is multi-layer solid wood (the surface is millimeters of precious solid wood veneer, and the other more than 7 layers are criss-crossed miscellaneous wood glued);

Through the above, you can probably also understand that in these two types, it is obvious that the thickness of the precious trees on the surface is much higher than that of multiple layers, so this kind of floor belongs to the quasi-high-end floor;

More than 7 layers, whether it is 9 layers or 11 layers, the relative cost is much lower, so it is low-end;

Third, the first step to buy parquet: first determine whether the variety used is three-layer or multi-layer, three-layer is more expensive, multi-layer is slightly cheaper;

Step 2: Determine the brand, multi-layer brands include Higa, Living Home, North American Fengqing, etc.: three-layer brands include Golden Eagle Egger, Shengxiang Kangshu, Rhine Sunshine Retro Flooring, etc.;

Step 3: Determine the tree species, whether it is three-layer or multi-layered, ** generally has a great relationship with the tree species, such as eucalyptus, oak, oak, etc.

Step 4: Eucalyptus, oak, oak, etc., multi-layered ones are between 160-260 yuan; The third floor is between 240-340 yuan; Precious wood species maple, walnut, cherry, marbao, etc., multi-layer **240-380 yuan; between 320-600 on the third floor; Of course, it is not excluded that there are more than 1,000 yuan of three-layer solid wood flooring, and the surface of these is made of a large piece of wood, which is suspected of hype;

I think you out of 250 yuan, there is basically no problem with choosing multiple layers, if the three-layer is more difficult, and then grit your teeth, to 300 there will be no problem, recommend the holy elephant Kangshu, Rhine Sunshine three layers; The multi-layer of life home and North American maple is also good;

I'm so tired! I hope to be able to help you, it took me more than half an hour!!

There are generally three kinds of thickness of parquet, 12mm, 15mm, 18mm, and the most used is 15mm, so that the board is visually close to the solid wood floor, and the foot feeling is better.

At present, many solid wood on the market in China are centimeters

The service life of plastic flooring lies in its wear-resistant layer, which is more than 8-10 years.

Thickness to vary.

Classification and thickness of flooring:

Laminate flooring: 8 mm, 12 mm, 15 mm. 12 mm is more common at home.

Hardwood flooring: 18 mm for the vast majority.

Parquet: Generally 15 mm.

Plastic flooring (another name for PVC flooring): the total thickness is limited to commercial flooring, and the thickness of sports flooring can reach 4mm, 5mm, 6mm, etc.).

Let me answer your question briefly Classification: solid wood flooring, diamond board, plastic flooring, anti-static flooring, thickness: solid wood common 18 cm 12 cm diamond board common are:

12 cm 8 cm Cm Plastic Flooring Anti-static Flooring is not introduced Diamond plate substrate is divided into: medium density and high density Detail plus my Q, I am a full set of floor wholesale.

The floor tiles do not look at the thickness, only look at the length and width, there are 60 * 60, 80 * 80, 100 * 100 and many other specifications.

Laminate flooring: the thickness is mostly 12mm.

Hardwood flooring: thickness in 18mm.

Composite multi-layer solid wood flooring: the thickness is 12mm-15mm, and there are also those with a thickness of 18-22mm.

The width of laminate flooring is generally 145mm-90mm, and the width of 8mm is relatively rare. The width of parquet is mostly 165mm-45mm. The width of the hardwood floor is generally 90mm.

Solid wood floor specifications: There are many specifications, generally: 450 mm 60 mm 16 mm, 750 mm 60 mm 16 mm, 750 mm 90 mm 16 mm, 900 mm 90 mm 16 mm, etc.

Laminate solid wood flooring specifications: generally 1200 mm 90 mm 8 mm, there are also products with a thickness of 7 mm.

Common specifications of multi-layer parquet length: between 900 and 2200 mm; Width: between 60 and 220 mm; The thickness is: between 12-22 mm.

Difference Between Solid Wood Flooring and Laminate Flooring:

Deformation: The solid wood floor is made of pure natural wood raw materials, which is natural and natural, and naturally receives the unique properties of wood, which is easy to arch and deform. This phenomenon is generally not seen with laminate flooring.

Wear resistance: Wood flooring is not very good in terms of wear resistance, and in laminate flooring, the wear resistance of solid wood parquet is far from the wear resistance of laminate flooring. Laminate flooring has some special ingredients added to it, so it is far superior to ordinary solid wood flooring in terms of wear resistance.

Environmental protection: Solid wood flooring using natural wood is of course an environmentally friendly product, while laminate flooring more or less uses some additives, so its formaldehyde and other indicators are beyond solid wood flooring. Laminate flooring is made of high-density board as the base material, laminated with wear-resistant layer and decorative paper.

It is characterized by many varieties of colors, hard texture, not easy to deform, fireproof and wear-resistant, and cheap.

The standard thickness of solid wood sports flooring is 20mm, when it is as small as 18mm, and the thickness specification is more than 22mm. The thicker the thickness of the sports wood floor, the higher the requirements for the production process of the sports wood floor.

There are three types of wood flooring: laminate flooring, solid wood flooring, and parquet flooring. The thickness of laminate flooring is mostly 12mm, the width is generally 145mm-90mm, and the width of 8mm is relatively rare; The thickness of solid wood flooring is mostly 18mm, and the width is generally 90mm, while the thickness of solid wood flooring is more than 12mm-15mm, and there are also thickness of 18-22mm, and the width is mostly 165mm-45mm. At present, in many families, the use of parquet will be more extensive, which has the stability of laminate flooring and the aesthetics of solid wood flooring, and has environmental advantages, and the requirements of parquet for wood are not so high, and can make full use of materials, so it is much lower than that of solid wood flooring.

How thick is the hardwood floor on the market? There are three thicknesses, one is 18mm, and most solid wood floors are of this thickness. The thickness of the other type is less than 18mm, and the thickness of the other is 22mm, this type of flooring is mainly affected by the size of the blank.

The thickness of a solid wood floor is directly proportional to its stability, and the thicker the floor, the better its stability and the more comfortable it feels.

Wood flooring is generally divided into the following three categories:

1. Solid wood flooring:

Solid wood flooring is widely used in families, the standard size of solid wood flooring is 90*900*18mm, and the wide version is 120*900*18mm. But there are also some solid wood floors that are not standard sizes, such as 750*600 short boards, including 750*60 mm narrow boards.

2. Parquet:

There are more specifications of parquet, and the common specifications in life are 1200*150*15mm, 800*20*15mm, 1802*303*15mm, 1802*150*15mm and other specifications. These are commonly used sizes and are more often chosen.

3. Solid wood UV painted floor:

Solid wood UV lacquered flooring is a kind of flooring that has been dried and processed. The surface is cured with paint. This plank is suitable for home use. The specifications of such plates are 750*60*16mm, 900*90*16mm, 450*60*16mm, etc.

Laminate flooring, 12mm is mostly three-layer composite, 8mm is mostly multi-layer composite, regardless of foot feeling or environmental performance, the former is stronger. Personally, I also think that 8 is enough, but if you have enough money, then using 12 will have a longer service life and better comfort. The mute pad may be the kind with a cork pad, which still has some effect.

Common in the general market: unit (mm).

Laminate flooring: multi-layer solid wood, three-layer solid wood: 15

Solid wood: 18

Reinforced 8 mm, 12 mm, 15 mm. 12 mm is more common at home.

Hardwood flooring: 18 mm for the vast majority.

Solid wood composite is generally 15 mm.

Hardwood flooring and composite multi-layer hardwood flooring are generally 2 cm thick.

Laminate flooring generally has three specifications: 8 mm, 12 mm and 15 mm, and 12 mm is more common for household use.

Hardwood floors are overwhelmingly 18 mm.

Solid wood composite is generally 15 mm.

The width of the solid wood floor is generally 90mm, and the traditional thickness is 18mm. I've also seen 15mm and 20mm, but rarely. The width of laminate flooring is generally 145mm-90mm, the thickness is more than 12mm, and 8mm is basically concentrated in the narrow board.

The width of parquet is generally 165mm--45mm, the thickness is 12mm, 15mm is more, theoretically more than 145mm wide board (the widest I have seen 202mm, the thickness is 28mm), the thickness is more suitable in 18-22mm, and the skin needs to be 4mm or 6mm.

Standard hardwood flooring and parquet flooring are 18mm, and laminate flooring is 12mm

Laminate flooring, also known as laminate flooring, is impregnated paper laminated flooring.

Laminate flooring has two thicknesses of 12 and 8 mm, and the quality is the same, that is, the thickness is not the same, and if you don't mind the thin point, it is actually a lot cheaper. The general specification of 8mm laminate flooring is 1210*193;Most of the 12 mm ones are 800*120, and the unit is millimeters.

Solid wood and solid wood multi-layer or three-layer parquet are generally 18 mm, and the specifications are about 800*120. Generally speaking, the most flooring specifications on the market are 800-900 long, about 120 wide, and 1200 long and wide for large ones.

Basketball hall wood floor has excellent bearing performance, high shock absorption performance and anti-deformation performance, excellent impact absorption performance effectively avoid athletes from sports injuries, as a basketball court sports wood floor, but also need to have more than 90% of the ball capacity, sports wood flooring these excellent performance depends on its material selection and structural system, the standard thickness of basketball hall wood flooring:

1. The standard of the playing field.

The surface layer of the wooden floor of the basketball hall is made of first-class hardwood, and the thickness of the finished product of the surface floor is not less than 20mm-22mm, and the thickness of the maple panel is 22mmThe thickness of the oak panel is 20mm, the width is 50mm-80mm, the width of all basketball hall wood floors must be consistent, the length of the basketball hall wood floor is not less than 450mm, the length of the panel is not less than 600mm-800mm, the total thickness of the basketball hall wood floor structure is not less than 106mm

2. Training ground standards.

The panel layer of the wooden floor of the basketball hall can be made of secondary hardwood, the thickness of the finished floor of the surface layer is not less than 20mm, the width is 60mm-67mm, the width of the wooden floor of all basketball halls also needs to be consistent, the length of the wooden floor of the basketball hall is not less than 500mm, the panel with a length greater than 700mm-800mm accounts for 85% of the total area, and the total thickness of the wooden floor structure of the basketball hall is 94mm-97mm.

The panel layer of the basketball hall wood floor is generally made of maple and maple birch, with a thickness of 20-22mm, a width of 60mm, and a length of 300mm-900mm grooves and convex grooves. Different sports venues have corresponding thickness standards for the thickness of the wooden floor of the basketball hall, when we choose the wooden floor of the basketball hall, do not go into the misunderstanding that the thicker the wooden floor of the basketball hall, the better, but to choose the wooden floor of the basketball hall that matches their own venues.