The computer will go in, and the computer will go in and that s it

First of all, let me ask you, did you use Kaspersky Antivirus or Kaspersky Firewall, or is it something like Kaspersky that has an incognito mode function? If yes,Then you just turn off this incognito mode,Don't be incognito on the network, this situation won't occur after stealth,Invisibility sometimes affects BT** speed,There is also P2P network TV。 A reboot of the machine or cat can sometimes do the trick, but it won't solve the problem at all.

The fundamental reason for this situation is that the broadband network you use (such as telecommunications, Netcom, iron energy, etc.) often has to detect your computer, and this situation will occur when the other party cannot detect your computer network card, and when this situation occurs, your network card did not get the IP address at that time, so this situation will occur.

It's not a big problem, though. Generally, this problem is not easy to occur, unless the broadband network you use needs to be adjusted to the network.

Your IP is dynamically allocated by the telecom operator, and this will not happen if you pay more money to buy an IP.

That's the principle, I hope it can help you, everyone adjusts it according to the situation, because I want to have many similar problems at a time, and I can only change all the time, and I don't have time to look at your topic carefully, and it can't be very right, if you still have questions, you can send me a message in the know, sorry.

You can also check whether the First Boot Device is HDD-0 in the Advanced BIOS Features menu of the BIOS

The screen appears: Disk Boot Failure, Insert System Disk and Press Enter.

Troubleshooting: After entering the CMOS settings, select the "IDE HDD Auto Detection" item to see if the existence of the hard disk can be detected.

If no hard drive is detected. The first thing to consider is the hard disk, you can judge whether there is a problem with the hard disk by listening to the sound of the hard disk or connecting the hard disk to other computers. If there is a problem with the hard disk, the data on the hard disk can be recovered by a special data recovery company; If the hard disk can be detected correctly, please check whether the capacity and other parameters of the detected hard disk are the same as the actual hard disk parameters.

is the same, indicating that the system should be normal, it may just be that the setting information of the hard disk parameters in the CMOS is missing. It means that the system must be faulty, it may be a failure of the motherboard, or it may be a failure of the hard disk data cable.

2.Reasons: 1) The hard disk and optical drive are connected to the same data cable, and the jumpers are all set as the master disk (or both are set as slave disks).

2) The CMOS hard disk parameter is set to none

3) Main boot sector end flag 55aah error.

Processing: (1) Set the CD-ROM jumper to a slave disk (or the hard disk jumper to the master disk).

2) Reset CMOS

3) Repair with NDD's "Diagnostic Disk".

There is a problem with the boot system on the hard disk, which has tried to boot from the device on all current systems, all failed.

It is recommended to boot the original system disk and reinstall the operating system.

1.When your computer has such a situation, don't operate blindly because you are in a hurry, because your blind operation may cause the system to completely collapse, and there is no room for recovery. So, first of all, think calmly about whether you have done anything before, or what you have browsed.

Because this situation is likely to be caused by a virus, the virus deletes your system's partition table or system boot file, and such a problem may occur.

2.We first have to reboot it, keep pressing the F8 key when you turn it on, if you keep pressing it and then a black background and white text menu appears, then fortunately, it means that your system is not in trouble. We enter the safe mode of the system, after which we enter the antivirus and repair the missing system files.

Then reboot the machine, maybe the problem will be solved smoothly.

3.If you keep pressing F8 and nothing happens, it means that the problem with the computer is more serious. If you have a backup of your system before, there may be a chance to survive.

Reboot,I kept pressing the up and down keys of the keyboard before turning it on,If a system selection menu appears,It means that the problem is still not big,It's just a system problem,Not a hardware problem。 Select Enter Restore to perform a system restore. After the restoration, of course, it can be turned on smoothly.

4.If you can't wake up the black flasher interface no matter what key you press, the problem is terminally ill. At this point, it cannot be concluded that it is a hardware problem, and it may be possible to solve it through software operation.

This is where you may need a PE system. Reboot, enter the BIOS, select the USB flash drive to boot, and enter the PE system. After entering, fix the system problem, or antivirus, or repair.

After the repair is completed and the computer is restarted, the problem may be solved.

5.If you enter the PE system, also restore the system, or even reinstall the system in PE, but it is still like this after booting, then you need to be somewhat mentally prepared. Because it's probably a hardware issue.

But at this point, it is not enough to send it for repair, you can disassemble the chassis, remove the hard disk cable, memory, graphics card, CPU, and other large hardware, wipe it, and then install it, you must be careful, and you can't violently disassemble the machine because of anxiety, because if you damage a certain hardware, then there is no way. This is a risky operation, but you may be able to solve the problem by trying. If this is the case, then after you reinstall it, you may be able to reboot the computer and the problem will be solved.

System error can only be reinstalled The system is still not good to reinstall That is the hardware compatibility problem This has to be troubled one by one.

Have you changed anything recently, such as drivers, or installed any software?

1. Restart the computer, press F8, and the selection menu will appear.

2. Select the last correct configuration, try the security mode, and if you can enter the security mode, you can uninstall the recently installed software or driver.

3. If you can enter safe mode, you can fix the blue screen through PC Manager.

1. Click to open the computer manager computer clinic.

Fourth, if this is still the case, you can only redo the system.