A must read for newbies What to pay attention to when turning a car

When the car turns, according to the road and traffic conditions, it should issue a turning signal at 50m and 10m before the curve (referring to the curve with a fork road), and sound the horn to warn the surrounding vehicles and pedestrians, and at the same time reduce the speed appropriately, keep the vehicle stable, and turn slowly on the right side of the road. Use the steering wheel to match the speed of the car, turn in time, and return early. After turning the curve, the turn signal should be dissolved in time.

1. The speed of the car should be slow when turning, and the steering wheel should not be too fast, so as not to cause the car to slide due to excessive centrifugal force. If the car skids, immediately relax the accelerator pedal, turn the steering wheel to the side of the rear wheel skidding, and return to the steering wheel to continue driving after the vehicle returns to the straight driving direction.

2. When the car turns, try to avoid using brakes, especially emergency braking, to prevent skidding or accidents.

3. When the car turns, the steering wheel should be adapted to the curvature of the road, and cooperate with the driving speed, so that the steering angle is appropriate, the steering timing is appropriate, and the direction of rotation is timely. It is strictly forbidden to take your hands off the steering wheel to prevent danger caused by deviation from direction.

4. When the car turns, the driver should have a correct estimate of the driving trajectory of the wheels. There are two factors that generally limit the angle of a turn:

1) Minimum turning radius: It is the radius of the trajectory taken by the front outer wheel when the steering wheel turns to the limit position when the car turns. It indicates the car's ability to turn around in a minimal area, as well as its ability to pass through narrow curved strips or around obstacles.

2) Inner wheel difference: It is the difference between the arc radius of the inner front wheel and the inner rear wheel when the car is turning.

When the car turns, according to the terrain, fully estimate the minimum turning radius and inner wheel difference of the vehicle, especially when turning sharply or driving a towing trailer or semi-trailer, more attention should be paid not to make the outer front wheel cross the road or collide with other obstacles, but also to avoid the rear inner wheel falling into the ditch or hitting the obstacle.

When the car turns, you must pay attention to these 4 points, otherwise it is easy to have an accident, and novices should pay special attention.

When we drive around corners every day, blind spots are often the most dangerous, so what tips do we usually have when turning? What are the cornering techniques for various road conditions? How do we turn? Let Bian Xiao solve this trouble for everyone!

1.When a car turns on a flat road, it is relatively easy to increase the driving speed due to the low road resistance. When the driving speed is high, the turning will produce a large detachment of mental force, and the sharp turning will produce a large centrifugal force, which will not only affect the riding comfort of the car, but also cause a rollover accident in serious cases.

Therefore, according to the speed and radius of curvature of the corner, the accelerator pedal should be released before entering the curve to make the car decelerate smoothly. When turning, you should choose the appropriate time and speed according to the width of the road, the radius of the curve, and the traffic conditions, pay attention to the coordination between the speed of the steering wheel and the speed of the vehicle, and try to avoid sudden braking and gear changes when turning. 2. The uphill curve has large uphill resistance, slow speed, and small centrifugal force, so in case of any situation, release the accelerator pedal in time, and the speed can generally be controlled.

However, when going uphill, the driving speed is slower, especially on long steep slopes, and the avoidance ability is poor. You should drive to the right as much as possible to avoid accidents. After passing through the top of the curve, switch back to the outside of the curve.

After confirming that the road is safe, step on the accelerator and finally quickly exit the curve by leaning on the outside of the curve. 3.When passing through a downhill curve, the center of gravity of the car moves forward, the forward inertia increases, the speed is higher, and the centrifugal force increases when turning, so it needs to be decelerated in advance.

After passing the top of the curve, switch back to the outside of the curve, lightly press the throttle, and finally quickly drive out of the curve against the outside of the curve. 4.Because you can't see the traffic at the end of the curve in the blind spot, you must reduce your speed first, and you can't drive in a normal curve.

When passing through a left turn, the steam type forest car should drive along the outside of the Bu Noise curve; When passing through a right corner, the car should drive along the inside of the corner. Once you see the exit around the corner, you can change lanes and directions. 5.

Composite Curve Compound Curve, the key point of the safety curve is to ensure that the last curve is maintained, so that it can quickly leave the curve at the exit of the last curve. Slow down first, drive to the entrance of the first corner, and drive through each corner in the same way as you go outside, then inside and then outside, adding a little throttle during the process. When you pass the last corner, once you see the exit from the corner, you can correct the direction, accelerate sufficiently, and leave the corner in a straight line.

Millions of car purchase subsidies.

What do I need to pay attention to when transferring? Many car owners don't know it in their daily driving. Today we're going to take a look at some of the things to keep in mind when turning.

First, the inner wheel difference.

The so-called inner wheel difference is the difference between the front and rear wheel radii when the car turns. The magnitude of the inner wheel difference is related to the magnitude of the direction and the length of the vehicle's wheelbase. The less the steering wheel, the smaller the inner wheel difference, the more the steering wheel, the greater the inner wheel difference, and the longer the wheelbase of the vehicle, the greater the inner wheel difference.

For example, in the Great Wall pickup, when the steering wheel is killed, the inner wheel is about 1 meter apart. Therefore, if you turn left, the front wheel on your left side must be more than 1 meter away from the curb on the left, otherwise, the left rear wheel of your car will fall into the ditch and the left side of your car will rub against obstacles and other people's vehicles. Similarly, if you turn right, the front wheel on your right must be more than 1 meter away from the curb on your right.

Second, the rear suspension was moved out.

Rear suspension outward: The rear suspension, that is, the trunk part behind the rear axle of the car, has a larger turning radius than the front and rear wheels of the attack beam. The longer the trunk behind the rear axle of the car, the more space the rear suspension will move out.

If there is a car parked on the left side of your car and it is very close to your car, you must not turn too far to the right of Chasen when your car is just starting or the rear left corner of your car will rub against your left car. When reversing, if you need to turn left, you must consider whether there is a vehicle or other obstacle on the right side ahead. Otherwise, you're going to pay the price!

Millions of car purchase subsidies.

When the car turns, you should pay attention to the width of the road, the size of the curve, the terrain conditions and the traffic conditions. According to the need, reasonably determine the turning route, speed and turning timing, so as to "slow down, sound the horn, and keep right". Deceleration is to facilitate observation of curves or sides of the road and to avoid oversteering, which may cause the car to slip or roll over.

The horn is to signal pedestrians to pay attention, especially when the sight is in a blind corner and the situation at the other end of the curve cannot be observed, the horn should be honked frequently. However, on the section where honking is prohibited, you should slow down and do not honk. Keep on the right to avoid encroaching on oncoming traffic.

An accident occurred on the route of the spring regret Huai.

1) Make a right turn. When making a right turn, you should wait for the vehicle to enter the pedestrian curve before driving to the right, and it is not easy to stay to the right too early to prevent the right steering wheel from deflecting out of the road or causing the vehicle to be forced into the middle of the road and affecting the vehicle.

2) Make a left turn. When turning left, the rotation angle of the steering wheel should be small, so that the vehicle turns a big bend through, but it should be noted that the right front wheel should not be driven out of the road, and when there is no oncoming car in front and other circumstances, you can drive to the left appropriately to improve the passing speed and driving stability.

During cornering, emergency braking and unnecessary gear shifting should be avoided as much as possible.

3) Continuous turns. Break down each curve into an independent single curve, treat it one by one according to the operation method of left and right turns, grasp the coordination of speed and steering, choose a good driving route, honk the horn at the right time, and drive along the right side of the center line.

The precautions for the car turning Zen are: 1. The speed of the vehicle should be slow, and the steering wheel should not be too fast, so as not to cause the car to slide due to excessive centrifugal force, if the car skids, the accelerator pedal should be relaxed immediately, and the steering wheel should be turned to the side of the rear wheel sliding, and then return to the steering wheel to continue driving after the vehicle returns to the upright driving direction; 2. The use of brakes should be avoided as much as possible, especially emergency braking; 3. The steering wheel should be adapted to the curvature of the road, and cooperate with the driving speed, so that the steering angle is appropriate, the steering timing is appropriate, and the rotation direction is timely; 4. The driver should have a correct estimate of the driving trajectory of the wheels. Repentance.

Pay attention to the following four points when the car turns:

Turns in town streets or access gates:

Slow down within 50-100 meters before turning, use the turn signal to indicate the direction of travel, do "one slow, two look, three pass", pay close attention to the inside of the car turn, and beware of pedestrians, bicycles, and motorcycles who are parallel to the side of the road and do not know the direction of the car.

Turns at forks in the road:

When turning left, the driver should see the road prohibition signs, send out the turn signal in advance, and keep to the left side of the road as much as possible when turning, so as to provide convenience for the rear car and the car turning right; When turning right, you should also give a turn signal first, turn slowly, and pay attention to the angle of entering and exiting the corner when turning, so as to prevent the right rear wheel from driving out of the road and rubbing against pedestrians and obstacles.

Turning in dense fog:

Drivers must be aware of the turn when driving in this weather, turn on the headlights and anti-fog lights early, use the horn moderately to attract the attention of pedestrians and other vehicles, move slowly, and be ready to brake and stop at any time.

Turns on steep slopes:

When approaching the corner, slow down, sound the horn and go slowly, manual transmission models in the steep slope when turning into a low gear in advance, in order to have enough climbing power, to avoid changing gears in the turn, in case of accidents. The timing of the steering should be selected appropriately, and a one-time turn should be made to avoid not being able to turn at one time due to improper steering, but turning after reversing once, which increases the danger.

The speed should not be too fast, or pay attention to the pedestrians and non-motorized vehicles on the inside, including the vehicles on the outside of the opposite direction to turn, so as not to turn the radius is too large and prone to problems, in fact, the most important thing to pay attention to is whether the steering is a green light,

Slow down, see if there is a car next to you, and turn slowly.

When turning left or right at an intersection, the driver must use the turn signal.

1. Left turn: When turning left, in addition to changing lanes in advance and turning signals, try to drive as close to the center of the road as possible when turning and waiting, so as to facilitate the passage of rear cars.

2. Turn right: When turning right, in addition to merging to the outside lane in advance, you should also turn right to remind pedestrians on the side of the road. When turning right, the speed should be slow, and at the same time, pay attention to the influence of the inner wheel difference when turning to avoid scratching pedestrians.

How to turn when there is a steep slope?

There are many urban roads, occasionally into the mountains to play, encountering a steep slope turn is really scared to death of the old K, the risk factor of the steep slope turn is very high, how to drive it safely? Pay attention to the following:

1. Downshift and slow down: When entering the ramp, we must not only reduce the speed of the car, but also shift the gear into low gear.

2. Honking: Because the steep slope turns are mostly mountain roads, it is difficult for you to see whether there is a car coming on the opposite side, so be sure to press the horn long before turning and tell the opposite driver that there is a car passing by to avoid a collision.

3. One-time in place: the most taboo in steep slope turns is to reverse in the middle and then turn, so try to be in place in one step when turning to avoid accidents.

First of all, if the motor vehicle wants to turn, then first of all, we must pay attention to reduce the speed, to a very low time, and then to look at the six roads, especially to play the left turn signal in advance, pay attention to the blind spot of the vehicle turning.

Before turning the car, make a half circle outwards to increase the straight-line distance between the car and the bend and reduce the probability of friction. It should be noted that after the front of the car passes, it is also necessary to pay attention to whether the rear of the car can pass safely.

When the car turns, plan the route in advance, reduce the speed of the vehicle in advance, pay attention to the road conditions, and pass slowly at low speed.

If you're a novice, then you'd better not put it in neutral when cornering, although when cornering, you can put it in neutral to let the car slide on the corner, which is really fuel-efficient, but you're not a veteran, so you have a good idea of how far you are taxiing and what speed you should be in neutral and when! You'll be sure of all of this!

In fact, if you want to get through the corner, it's also very simple, and there are many ways to do it, including a lot of insight! When encountering a curve, first slow down, the specific operation is to step on the clutch left and the right on the brake, don't step on the brake to death! Secondly, hit the steering wheel again, and hit along the arc of the corner!

Finally, after you pass the corner, release the brakes, step on the clutch, enter gear again, and straighten the steering wheel!

Isn't it simple?

May you have a smooth journey on the road!!

C,,, After two turns, the car starts in the same direction and the angle remains the same!

Brake to slow down, it's better to change to neutral!! Wait for the gear to be oiled after cornering.