Apple 4th generation just bought why can t I get on the Internet. That big brother can help you out

The first thing to do is to make sure that your card is GPRS activated

Then see if there are any errors in your Internet settings;

Set up the access point: Settings - Connection Settings - Access Point. The licensed goods should have preset three access points, mobile Monternet GPRS, China Mobile MMS, and GPRS to connect to the Internet.

The configurations of these three access points are: (a) Montnets GPRS: data bearer mode GPRS, access point name CMWAP, user name none, prompt password no, password none, authentication common, mobile phone IP address automatic, primary name server, secondary name server, **server, **server, **port 80

b) China Mobile MMS: data bearing mode GPRS, access point name CMWAP, username none, prompt password No, password no, authentication ordinary, homepage, mobile phone IP address automatic, primary name server, secondary name server, **server, ** port80

c) GPRS connection to the Internet: data bearer mode GPRS, access point name CMNET, username none, prompt password No, password no, authentication ordinary, homepage none, mobile phone IP address automatic, primary name server, secondary name server, **server none, **port 0

General monthly users do not include CMNET mode, and general monthly users are recommended to put it"The "GPRS Connect to the Internet" access point was removed, and the "cmnet" in the packet data was changed to "cmwap."

Yes, type it into your browser to access it.

Didn't the clerk help you set it up when you were at the store? What card are you using? The Internet access function is not enabled.

1 All 1, it may be a router problem, unplug the router power cord, and then plug it back in;

2. The broadband modem and the router are not connected well, causing the router to be normal, but it cannot access the Internet;

3. Is the broadband expired, causing the router to be normal but unable to access the network?

4. Try using other notebooks, if there is an exclamation mark in the connection status, it means that the router and the cat are not connected well, or there is a problem with the DHCP opening of the Chang router.

If you are mobile, you can set up General Network, Cellular Data, VPN, and CMNET Unicom 3G, so you don't need to set it up.

If your iPhone 4 is not connected to the Internet, you can reset the data connection by following the steps below

1. First find the "Settings" icon of your phone, tap "Settings", find "General", and select "Cellular".

2. If the mobile phone card supports 3G Internet access, you can also turn on the 3G option. This can greatly improve the speed of surfing the Internet, but at the same time, it will also increase the consumption of power.

3. You can choose to turn on data roaming. This option is generally not turned on.

Hello! Please check the network status and find an area with a good network signal to log in again.

Please go to your phone's settings, try to clear the cache data, and then log in again. Generally, this prompt is also partly caused by the excessive cache data of the mobile phone affecting the network speed.

If you still can't log in, it's usually due to local network issues, so try again later.

Note: For GPRS users, the access point: CMNET or CMWAP needs to be changed to Uninet or Uniwap Thank you!

Are you buying a high-imitation machine or a licensed product? Because both of these settings are not the same.

Mobile card?

Settings - General - See if there is a profile below, and if so, remove it.

Settings - General - Restore - Reset Network Settings. Consult 10086 to configure the Internet access parameters.

If you can't change the SIM card to go online for testing, the test mobile phone problem is still a card problem.

Hope it helps

You don't want to delete the fast bird on the Internet.,Just look at it.,If you delete UC can be used.,It's clear.。 I recommend the landlord to use the "horse head flow" beer is good for this software.

Your machine should not have cellular data set.

Set the generic network cellular data network - ah apn:cmnet username.

Password MMS: apn:cmwap username.

Password empty mmsc:

MMS**::80

China Unicom 3G MMS Action Data APN:

3gnetapn

Uninet username.

Password empty mmsc:MMS**::80

For the Apple 4th generation, please refer to the following settings.

Step 1: Please enter the GPRS parameter setting menu of your mobile phone; Step 2: Enter the following parameters in the GPRS settings menu

1. Homepage:;

3. APN settings (i.e., access points): CMWAP;

4. Gateway port number: 9201 or 80;

5. Timeout limit: 600 is recommended;

6. Username setting: empty;

7. User password setting: empty.

The setting menu is different for different mobile phones, and the specific setting menu can be understood through the mobile phone manual. You can also visit the Communication 100 service hall in person, which is set up by mobile customer service staff. After the setup is successful, you can call the customer service of the mobile phone brand** to learn how to use your mobile phone to log in to the network. Mobile.

I know that the team of Steel Seven Company will answer for you, thank you.

The wifi of the Apple mobile phone can sometimes be connected, and sometimes it can't, for several reasons:

1) Depending on the settings of the wireless channel, you can try to change the settings of the wireless channel.

2) The iPhone can't get the IP automatically, you can try to set a static IP.

1. How to change the wireless channel:

1. Open a browser on the computer, enter the router box or the manual written on the router box) and enter the router account and password.

2. Click [Wireless Settings] - Basic Settings, select 11 or [Channel] on the right.

13. Click [Save].

Second, the method of setting a static IP on the Apple mobile phone:

1. Click [Settings] on the desktop of the mobile phone - click [Wireless LAN] 2, and then find the wireless network you want to set a static IP address, and click the blue arrow on the right.

3. Click [Static IP].

Subnet Mask: Router:

DNS: You can also enter regional DNS).

After entering, click [Wireless LAN].

There may be a problem that can't be moved.

We recommend that you follow the steps below to see what caused it and resolve it:

1. Check whether the mobile phone has turned on the network switch, and the mobile phone needs to turn on the network connection function to access the Internet.

2. Check whether the mobile phone is in arrears, the mobile phone in arrears cannot be connected to the data network and needs to be recharged.

3. If you can't access the Internet due to network delay, you can turn on the airplane mode of your phone, turn it off after five seconds, and then reconnect to the network or restart your phone.

4. If the network settings are not set up, you can call the operator to which the mobile phone card belongs, and ask the customer service to send the relevant data of the Internet settings and set it according to the prompts.

5. If the signal in the place is not good, you can't access the Internet, so you can change the place and connect again.

6. The above is the solution for data network connection, but if it is connected to a wireless network, then you need to check whether the mobile phone wifi password input and the wireless router's Internet access settings are correct, and whether other devices can access the Internet through wifi, it is recommended to delete the wifi password of the mobile phone and re-enter it again, or restart and re-set the wireless router.

7. If the above methods still cannot solve the Internet problem, and you suspect that the hardware of the mobile phone Internet template has been damaged, it is recommended to go to the local after-sales service to check and solve it.

One is that your signal is not good, and there is a network connection error, try to restart it, and then make up for it, find the manufacturer.

Cellular network (GPRS) should be turned on

1 The main reasons and solutions for all Apple 4 mobile phone wifi network not to use:

1. The mobile phone is not turned on the wireless LAN, so the wifi network cannot be used; You can enter the settings of the mobile phone - wireless LAN - turn on, after turning on, automatically search for nearby wifi signals, click on the target wifi signal, enter the corresponding wifi password, and the connection can be established.

2. The distance between the mobile phone and the wireless router is too far to receive the wifi signal, so the wifi network cannot be used; You can move your phone closer to the wireless router so that the phone can search for the wifi signal, which can solve the problem.

3. If there is a problem with the network settings of the mobile phone and the wifi network cannot be used, you can enter the settings of the mobile phone - restore - restore the network settings, restart the mobile phone after restoring, and then try to connect to the wifi signal.

4. Problems with the wireless router will also cause the mobile phone to not be able to use the wifi network; You can restart the router to solve the problem; If necessary, you can restore the router to the factory setting state, and then reset the network parameters of the router.

5. Problems with the hardware of the mobile phone will also lead to the unusability of the wifi network, such as network module failure, antenna failure, motherboard chip failure, etc., it is recommended to contact Apple's official after-sales service for maintenance and solution.

1. The password of the wifi network has been changed. 2. The phone needs to be restarted. 3. The wifi network cannot be used.

Take the machine packaging, warranty card, my ID card, go to the local customer service to test, the local customer service generally has wifi, try it to know. If it's okay, it is recommended to replace the router.

Finally, take a look at your phone's settings to see if they're correct.

Is there a wifi signal around?

Has the wifi switch been turned on on the phone?

Apple phone can't get on the Internet solution:

1. First of all, you can't get on the network to check the balance of your mobile phone, there is no money, China Telecom Unicom Mobile will not let you go online, if the balance is sufficient, please see the next step.

2. Secondly, if you buy a small card, or cut a small card, it may also be the reason why the card can not be on the Internet, you can change a mobile phone, if you can't go to the Internet or go to the business hall to make up a small card, it is recommended to cut the card if you don't know how to go to the business hall to cut, no charge, if you use the mobile to go to the Unicom business hall to cut it will definitely cost money.

3. When all are confirmed, Settings -> cellular mobile network Enable 3G Click on the cellular mobile data and the data roaming will come out Data roaming is turned on, sometimes it is because the data roaming is not turned on and you can't access the network.

Airplane mode, off, on].

Good luck.