What happened if the phone just bought it and couldn t turn it on

Solution: 1. If the phone is automatically shut down due to insufficient power caused by excessive use of the mobile phone, and there is no response or cannot enter the desktop when it is turned on again, then it can be determined that the mobile phone battery has entered a dormant state due to excessive discharge. At this point, you need to remove the Redmi battery.

2. Then use the "universal charger" to charge, so as to forcibly activate the battery again and return it to normal use. When using universal charging, make sure that the positive and negative poles of the battery are connected correctly.

Wait for the charging to complete, install it in your Redmi phone and try to turn it on again.

3. You can connect the phone to the original charger to charge it for a period of time, and then press and hold the power button to try to turn it on (if it is windows

phone operating system mobile phone, you can long press the volume down button + power button).

hi!You can connect your phone to the original charger to charge it for a period of time, and then press and hold the power button to power it on (if it is Windows

phone operating system mobile phone, you can long press the volume down button + power button). If it still can't be turned on, (within 15 days of purchase), please bring the purchase invoice and warranty card, and contact the Nokia service outlet designated by the dealer to check the phone.

Summary. 1. The battery of the mobile phone is too low If the power of the mobile phone is used to a serious extent, resulting in the automatic shutdown of the mobile phone, in this case, many times just plugged in the charger, it still cannot be turned on normally. All we can do is wait for the phone to charge for a while longer.

2. Flashing the mobile phone is equivalent to changing the system of the mobile phone, and the user experience of the mobile phone can be improved by brushing some new systems, but sometimes because of the brushing of some incomparable rom packages, it is likely to cause the mobile phone to not turn on, and it has been in the boot interface, etc., at this time, we can only match it'The phone ROM package and then flash the phone again to solve it. 3. Mobile phone battery damage Mobile phone battery is a consumable product, when the mobile phone has been used for a long time, there will be premature damage or bad battery, etc., you can connect the mobile phone to the charger to see if the mobile phone will show the increase rate of charging or power percentage, to simply judge whether the battery is damaged, if the battery is damaged, it is recommended to replace a new battery. 4. Physical fault of the mobile phone If it is because the mobile phone is flooded or broken, it will also cause the mobile phone to not turn on.

Hope it helps.

Can you add, I don't quite understand it.

1. The battery of the mobile phone is too low If the power of the mobile phone is used to a serious extent, resulting in the automatic shutdown of the mobile phone, in this case, many times just plugged in the charger, it still cannot be turned on normally. All we can do is wait for the phone to charge for a while longer. 2. Flashing the mobile phone is equivalent to changing the system of the mobile phone, and the user experience of the mobile phone can be improved by brushing some new systems, but sometimes because of the brush to some incomparable rom packages, it is likely to cause the mobile phone to not turn on, and it has been in the boot interface'The phone ROM package and then flash the phone again to solve it.

3. Mobile phone battery damage Mobile phone battery is a consumable product, when the mobile phone has been used for a long time, there will be premature damage or bad battery damage, etc., you can connect the mobile phone to the charger to see if the mobile phone will show the increase rate of charging or power percentage, to simply judge whether the battery is damaged, if the battery is damaged, it is recommended to replace a new battery. 4. Physical fault of the mobile phone If it is because the mobile phone is flooded or broken, it will also cause the mobile phone to not turn on. Hope it helps.

Hello, I am glad to serve you and give you the following answers: the new phone cannot be turned on may be caused by a variety of reasons, first of all, it may be due to insufficient battery, you can try to fully charge the battery and turn it back on; Secondly, it may be due to a malfunction of the system, and you can try to reinstall the system; Again, it may be due to a hardware failure, and a replacement hardware can be attempted; Finally, it may be due to improper operation, you can try to reset your phone and restore it to factory settings. In short, the novice peeling machine can not be turned on may be caused by a variety of reasons, and the corresponding brigade poor measures can be taken according to the actual situation to solve the problem.

Summary. Hello, glad to answer for you. Kiss, the new phone can't be turned on; 1. Check whether the battery is too low and cause the standard charger and data cable to be charged for 30 minutes, then press the power button to check whether there is a charging screen.

No charging screen: Please replace other chargers and data cables that can charge normally to confirm whether the charger and data cable are abnormal. If there is still no charging screen after replacement, it may be a fault of the mobile phone, it is recommended to bring the mobile phone, charger and data cable, and purchase voucher to the customer service center for testing; There is a charging screen:

Please press and hold the power button to try to turn on the computer, if it cannot be turned on, please follow the following methods to continue troubleshooting.

Hello, glad to answer for you. Kiss, the new phone can't be turned on; 1. Check whether the battery is too low to cause the standard charger and data cable to be charged for 30 minutes, and then press the power button to see if there is a charging screen. No Charging Screen:

Please replace other chargers and data cables that can be charged normally to confirm whether the chargers and data cables are abnormal. If there is still no charging screen after replacement, it may be a mobile phone failure, it is recommended to bring the hand diffuser, charger and data cable, and purchase voucher to the customer service center for testing; There is a charging screen: Please press and hold the power button to try to turn on, if it can't be turned on, please follow the methods below to continue troubleshooting.

2. Confirm whether the mobile phone has been liquidated or damaged Liang Yanqi Xiangxian's mobile phone has been liquidated: If the mobile phone has been automatically turned off, please do not try to turn it on, you can use a paper towel to absorb the liquid, and send it to the local vivo Kexiang Household Service Center for testing as soon as possible. Phone Drop:

If there is instability after the phone is damaged, it is recommended that you send the phone to the local vivo customer service center for testing.

Hello, I am happy to serve you, and make the following answers for you: the new volt punch mobile phone can not be turned on may be caused by a variety of reasons, first of all, you can check whether the battery is damaged, if the battery is damaged, you can try to replace the new battery; Secondly, you can check whether the power button of the mobile phone is damaged, and if it is damaged, you can try to replace it with a new power button; Finally, you can check if your phone's system is malfunctioning, and if it is, you can try to reinstall the system. If the above Hu Hall fierce method.

Summary. Hello, I am happy to serve you and give you the following answers: the new phone can not be turned on may be caused by a variety of reasons, first you can check whether the battery is damaged, if the battery is damaged, you can try to replace the new battery; Secondly, you can check if the power button of your phone is damaged, and if it is damaged, you can try to replace it with a new one; Finally, you can check if your phone's system is malfunctioning, and if it is, you can try to reinstall the system.

If the above methods.

Hello, I am happy to serve you, and make the following answers for you: the new volt punch mobile phone can not be turned on may be caused by a variety of reasons, first of all, you can check whether the battery is damaged, if the battery is damaged, you can try to replace the new battery; Secondly, you can check whether the power button of the mobile phone is damaged, and if it is damaged, you can try to replace it with a new power button; Finally, you can check if your phone's system is malfunctioning, and if it is, you can try to reinstall the system. If the above Hu Hall fierce method.

Can you add, I don't quite understand it.

Hello, I am happy to serve you, and make the following answers for you: the new volt punch mobile phone can not be turned on may be caused by a variety of reasons, first of all, you can check whether the battery is damaged, if the battery is damaged, you can try to replace the new battery; Secondly, you can check whether the power button of the mobile phone is damaged, and if it is damaged, you can try to replace it with a new power button; Finally, you can check if your phone's system is malfunctioning, and if it is, you can try to reinstall the system. If the above Hu Hall fierce method.