What to do if the computer is noisy, how to solve the computer noise is too much

Updated on Car 2024-05-25
7 answers
  1. Anonymous users2024-02-11

    Change to a soundproof chassis...

  2. Anonymous users2024-02-10

    First of all, it is necessary to determine which part is the loudest noise.

    After judging it, judge whether there is a problem with this part.

    If there is a problem, change it.

    The hard drive may also be louder).

    In addition, the person who assembles it is not responsible, and the sound caused by the lack of screws and other fixes is loud.

    It is recommended to find a knowledgeable friend to take a look.

  3. Anonymous users2024-02-09

    There is noise It is nothing more than the noise of the CPU fan graphics card fan and the power supply fan If your power supply is silent and there is no noise, then it is most likely to be the CPU fan If you have money, change to a water cooling Silent If you don't have money, change it to a lower speed, but your CPU temperature will be very high if you are 4 cores, and the requirements for the fan will be very high, if the sound is not too loud, it is recommended not to change to a low speed.

  4. Anonymous users2024-02-08

    It's not a matter of changing anything, your CPU and graphics card are very good, such things consume a lot of power, resulting in an increase in heat, you need a fan to better dissipate heat, the number of revolutions of the fan has reached, and the natural noise is loud, I use AMD 630 and GTS250, if you don't play games, there is no sound, and there is a lot of noise when you play, but I feel nothing It's normal.

  5. Anonymous users2024-02-07

    AMD's CPU has a lot of power and naturally a lot of fan noise.

  6. Anonymous users2024-02-06

    Check which fan is noisy and change it.

  7. Anonymous users2024-02-05

    1. Clean up the dust of the power supply fan. Steps: Prepare the oil and toothpicks, unload the power supply from the top of the chassis, then open the housing of the power supply and remove the fan.

    Find the place where the dust is sniping, use a gentle brush to clean the dirty place, after the cleaning is completed, there will generally be a label on the front of the fan bend, open the label, and dip a toothpick into the oil on the bearing under the label. Then glue the label back, restore the power supply, and put it back on.

    2. Replace the silent power fan. Many of today's silent power fans have been rigorously tested to reduce noise, so you can consider replacing the silent power fans.

    3. Prevent high current impact. If your computer is very noisy when it is turned on, it is caused by the excessive current at the moment of booting, you can install a filter or replace it with a better power supply to prevent the noise caused by the high current. You have a power socket with filtering function.

    It can also be purchased.

    4. Install a thermal fan governor. A thermal appliance is an automatic fan governor with a temperature measurement. When using, touch the temperature probe to the heat sink.

    In this way, the fan is connected to the governor, and when the temperature rises, the governor helps the fan to regulate the speed, and when the temperature is low, the speed regulation helps the fan to reduce the speed, so as to reduce the noise of the fan.

Related questions
21 answers2024-05-25

First of all, we can check whether the freezer is flat, if the freezer is not flat, it will make some noise, you can add a rubber pad at the foot of the box to make it balanced. >>>More

33 answers2024-05-25

Most of them are cold, the air is dry, and the fan lacks oil. >>>More

15 answers2024-05-25

Top 4 causes of car noise:

1. Engine noise. >>>More

22 answers2024-05-25

Method: Uncover the paper at one end of the hinge, you will see the hinge, add an appropriate amount of sewing machine oil (even cooking oil) to lubricate, which will greatly reduce the noise of the fan. >>>More

7 answers2024-05-25

It is caused by the wear and tear of the fan, remove the self-adhesive on the back of the fan, point two drops of sewing oil, do not need other oil, and then seal it, and use it for ten days and a half without a problem. If you have time, change it