How to hook woolen shoes with roots, how to hook woolen shoes

Hook with a root of the woolen shoes steps:

Preparation materials: The main tools needed are: wool, sole, crochet and black clip.

1.The color of the yarn can be matched according to your preference. It is best to use three threads to weave the soles with wool, so that the woven soles are thicker and more comfortable to wear! Wool can be woven from discarded wool, which can save new wool.

2 Knitting soles is best while weaving while contrasting, according to the shape of the sole to weave, the needle is reduced, the needle is added.

3 After knitting the sole, it can be fixed to the sole with a crochet needle. The front of the shoe can be fixed with a clip to secure the center!

4 Then use the wool thread to start knitting from the right side of the shoe.

5 Tie a knot first.

6 Then start knitting with a crochet needle.

7 is an ordinary flat needle.

8 Weave from one side of the shoe to the other side of the shoe.

9 Knit all the way to the beginning of the position, and close the needle together by one stitch.

10 Thread it with clips and fix it.

Then wrap the thread from that side to the side of the shoe, and knit a needle just in line with the opposite side.

Finally, use a regular flat needle to hook from that side to the side of the shoe.

Hook all the way to the starting needle, then close the needle.

After hooking all the way, wrap the line from the starting point to the side of the shoe.

Went around this side and started to hook the second needle.

Adults should hook four flat needles, and children should have three ways.

After hooking the edge of the shoe, you can hook the upper, wrap the line from the starting point to the ** position of the shoe, first use your eyes to look at the center of the position, and then three stitches on both sides of the shoe, adding up to six stitches (seven stitches for adults) and two stitches fixed on both sides of the shoe, plus together is eight stitches. The middle of each needle should be empty and not hooked, and the needle that is not hooked is hooked only by the second hook.

You can see that Wenwen's mother helped Wenwen hook six needles, and there are two needles in one needle.

Then with other threads to hook, so that there is a pattern. One stitch of pale pink thread is hooked out of the empty needle of the first stitch, and one stitch is drawn very long, and the needle of the upper of the hook is not flat, but two stitches combined with one stitch. Friends who have a foundation in crochet know.

After hooking the last (that is, on the left) and the clip, merge one stitch and fix it with the clip!

When hooking, the needle must be even, and the elastic is tightened by yourself. Don't hook too loose or too tight! If it's too loose, the shoes will become bigger and unstable! If it's too tight, it will jam.

In this way, hook back and forth in the same way, and at the end of the hook, use a pink color to hook the edge of the shoe, and in this way, you have to change the ordinary flat needle to hook.

Finish. Generally, hook shoes must have basic skills! It takes several years of experience in crocheting shoes to hook shoes of the same size.

You search, because this is not clear in words, you search for explanations with pictures and words.

Hook of woolen shoes:

Prepare materials: wool, sole, crochet hook, black clip two.

Operation steps: 1. The sole **, X is a short needle, the circle is a braided needle, T is a medium and long needle, T has a horizontal needle, and a horizontal needle is a long needle.

2. The effect of the sole hook out is that the heel is narrow, the toe is wide, the crochet is 2, and the alignment is hooked with other colors of wool hook for a circle of pulling needles, do not hook too tightly.

3. Pick the edge from the relatively wide one for the toe, count 6 stitches on both sides in the middle position, and start to crochet short needles from either side.

4. Use 5 rows of round-trip crochet, crochet short needles, medium and long needles, which is faster.

5. After the last stitch of the 5th row is completed, hook a braid, determine the number of braids according to the size of your buttons, and then connect them into a circle. The other side is stitched with buttons, and the upper is finally hooked with a short barb needle, and the button is buttoned and the mold is completed.

The hook method of woolen shoes is as follows:

1. First hook the line on the bottom (special line for the bottom - coarse cotton thread or nylon thread).

2. Use a short needle to hook a short needle on the bottom line, (if you want to stand a little bit, you can use two wire hooks) hook four rows, and the heel does not need to hook four rows.

3. Weaving the bottom: use two rod needles to weave according to the shape of the bottom, the root scattered spike according to the thickness of the wool, the size of the sole, the second row of weaving on both sides of each plus a needle to form a rounded corner, weaving to the bottom of the width of the place to add a needle, can not add too much, the bottom of the weaving is better than the sole is a little smaller, because the wool shrinkage is good to weave just right, it will be too big, uneven. (In order to weave two insoles into the same, you can use two threads to knit at the same time) The needle is also rounded according to the shape of the bottom.

4. Sew the woven bottom on the sole: if there is a thin sponge, put two layers under the woolen sole (the sponge and the woolen bottom can be sewn from top to bottom in the middle).

5. Needle: the toe of the shoe is facing yourself. To leave a thread that is slightly longer than the sole, the stitch can be started according to the size of the sole, or 7 stitches.

In short, the two sides should not be crooked, but should be equal. (If there is an unevenness on one side, you can separate the braid at the same time, and sometimes you can separate the two braids.) Utility.

It depends on the high and low).

The first needle is crocheted with a short needle, then separated by a braid, and in the third braid, two medium and long needles (that is, a large needle) are hooked in the third braid, and then two medium and long needles are hooked in the fifth braid, and so on.

Hook to the end and hook a short needle, and then hook the remaining thread out of the short needle loop and tighten it. The needles mentioned above are all large needles. The first hook of the medium-length needle in the second row is in front of a large needle in the first row, and the second needle is hooked in the braid needle below, (if the yarn is thin, you can also hook both needles underneath, which will be thicker).

The first needle of the medium and long needles in the third row is the same as above, the second needle is hooked in the middle of the two medium and long needles in the lower row, and so on. The first and last stitches of each row are short stitches.

6. In order to make the upper not high or low, don't hook every braid, but properly separate the braid hook, if each braid is hooked, the upper will be high.

7. Hook flower: to choose the pattern suitable for the size of the sole, try to hook in the middle, the general size of the pattern is three big needles to start. Note:

The front and back should be symmetrical, and the front and back should be three large needles. The hook is more than 20 rows, the sole is long, and the number of rows will be more) The color matching and line change of the song wheel is changed when two medium and long needles are changed for one needle.

8. End: After hooking, hook one or two rows of short needles.

1. Hook the wool with a short needle on the bottom.

2. Weave the bottom of the pad, weave with two rod needles according to the shape of the bottom, according to the thickness of the wool, the size of the sole from the needle, add a needle on both sides of the second row of weaving to form a rounded corner, and add a needle to the width of the weaving point, and the bottom of the weaving is better than the sole of the shoe. The collection of needles is also rounded according to the shape of the bottom.

3. Sew the woven sole on the sole.

4. Start the needle, with the toe of the shoe facing you. To leave a thread with a wax slightly longer than the sole, you can start with 5 or 7 stitches depending on the size of the sole. The two sides should be level.

The first needle is crocheted with a short needle, and then separated by a braid, two needles with medium and long needles, and two with a braid, and so on. Hook to the end of a short needle, and then hook the remaining thread out of the short needle loop and tighten it.

5. In order to not have a high upper or a low search bureau, don't hook every braid, but properly separate the braid hook, if each braid is hooked, the stupid slippery upper will be high.

6. Hook flowers, to choose and the size of the sole suitable pattern, to try to hook in the middle, the general size of the pattern is three big needles after the start.

7. At the end, hook one or two short needles after the hook is finished.

There is a tutorial on slippery hand woolen hook shoes, which is detailed below:

1. Knit the sole first, if you don't want to knit the sole, you can buy the ready-made one directly. After placing the braided sole on the insole and sewing it on, the upper is hooked. Add knitting to a total of 30 needles and weave with red thread, start to add one needle, bury friends to the back and leave 4 needles not to weave.

2. The starting point of the line is around the shoe**, look at the center with your eyes, knit two needles on both sides of the back shoe, add up to four needles, and each needle is empty in the middle of a needle is not enough, but this needle should be hooked to the second circle. It can be matched with other colored threads, so that the outlined shoes will have a pattern. Crochet two needles and one needle, you can hook evenly, until the hook is halfway, and the slippers are ready.

3. Hook a small braid first, about 10-12 sets, and adjust it according to the size of the baby's feet. Hook the column along the braid, needles need to be added at both ends, otherwise it will be uneven, two small posts with two empty hooks at each top, about six groups on each side. Hook a circle in the same way, without adding needles on both sides.

Start hooking the third loop to form a circle, which is the sole.

4. The first needle on the reverse side is not bent to let Huai weave, and the thread is pulled to the front to continue to weave the needle at the beginning of the needle, and the back is lost 2 needles. After adding a circle of columns, start to hook the upper, hook a column for every two holes, hook half, and the remaining half is a hole hook for a column. When the hook is almost reached, the needle is reduced and the finish is closed.