Is it better to have an electric drying rack or a manual one?

The electric one is relatively good, and the electric one is mainly easy to use, but it is the highest level; Manual is cheap, but it is inconvenient to use, and it is generally more manual. At present, the automatic drying rack industry is better in the colorful years, and you can learn about it.

Drying rack accessories can be divided into 6 types:

1. Hand crank.

The hand crank is the heart of the drying rack and is the most critical accessory. The average hand crank can only be used for one to two years, which is the most dissatisfied with consumers.

2. Wire rope.

At present, most of the wire ropes of drying racks are made of stainless steel wire. The biggest requirement of wire rope is wear resistance and not just rust resistance.

3. a steering gear.

It is a device that is mounted on the wall and keeps the wire rope perpendicular to the hand crank by passing it through the inner pulley.

4. The top seat is a device installed on the ceiling of the balcony, so that the wire rope is vertically connected with the drying rod and supports all the weight through the internal pulley.

5. The drying rod is usually equipped with two drying rods, at the beginning it is a stainless steel pipe, and now it is mostly an aluminum pipe with different shapes, because the aluminum surface can be treated with a variety of surfaces to make it look beautiful and decorative.

6. Hanger A set of drying racks will be equipped with 12 15 hangers, generally using plastic hangers or wooden hangers, and some high-end products use aluminum alloy hangers, which are extremely luxurious.

Compared with manual drying racks, the advantages of Yicai electric drying racks are:

Continuous, constant warm wind, drying and effective drying at the same time, refusing to rely on the sky to dry clothes;

Light wave intelligent sterilization to care for health.

LED Art Lighting Comfortable natural light quality.

The air-drying or drying function will be automatically turned off after 3 hours, which is more energy-saving and worry-free;

Humanized fuselage button setting, after drying clothes, you can directly complete the one-key intelligent rise stop operation, intimate and ready.

High-quality audio configuration adds a wonderful spice to your life.

If you encounter obstacles during the descent, you will stop running to avoid misuse and injury when children are playing around, and effectively protect the safety of you and your family; Equipped with double insulation protection to ensure the safety of electricity, so that you can rest assured.

Elastic coiled wire, super large load-bearing, stable and durable.

Relatively speaking, the disadvantage is one word: expensive.

Hope mine is helpful to you.

In the comparison of actual life experience, the electric drying rack is better, but it is also relatively higher!

First, the appearance of contrast.

1. The lines of the hand-cranked drying rack are relatively abrupt, and the appearance lacks aesthetics;

2. The wire rope is like a spider web, which is not neat and beautiful enough.

3. Electric drying racks, smart balcony household appliances, fashionable and graceful appearance design, majestic atmosphere;

4. The whole fuselage uses integrated design, streamlined modeling, simple and fashionable.

2. Functional comparison.

1. The hand-cranked drying rack has only two clothes poles, and there are very few clothes that can be dried

2. When drying clothes, it is necessary to rely on hand cranking to lift, which is very troublesome and a waste of time to operate

3. Especially for today's office workers, there is no time to operate in the morning.

2. Electric wireless remote control, no direction and obstacle restrictions, drying clothes is very easy;

3. The lighting is integrated and designed, saving a balcony lamp

4. It has the function of light wave sterilization, which can also sterilize clothes and make the whole family healthy

5. Rapid air-drying function, saving time, effort and worry;

Lifting drying racks, also known as automatic drying racks, are divided into two categories: hand-cranked and electric, which are generally installed on the balcony and hung with wire ropes. When drying clothes, the drying rod is lowered by hand cranking or electric method, and the drying rod is raised after drying the clothes, which is very convenient. The lifting drying rack is to drive the drying rod through the corner device and the top seat through the hand crank, so that it can be raised and lowered, and the hand crank has a self-locking function (mainly through the built-in spring tightening or contraction to generate friction), which can make the drying rod automatically locked at any height.

First, the top seat. It is installed on the ceiling of the balcony, so that the wire rope passes through the internal pulley and vertically connects with the drying rod and supports all the weight of the installation, the top seat is not only used for this role, the manufacturers stop various designs on the shape of the top seat, so that it can also become a decoration that can decorate the ceiling.

2. Hand crank.

The hand crank is the heart of the drying rack and the most pivotal accessory, because the hand crank is the most complex structure of all accessories, and it is also the most casual break. The role of the hand crank is to drive the drying rod to lift through the wire rope, which is the most moving and frictional part, so it is more likely to be damaged casually, but now the manufacturers are also gradually improving the hand crank technology, the exception is that the manufacturers in Guangdong pay more attention to the hand crank to work hard, and one manufacturer has produced a hand crank that promises to guarantee 5 years.

3. Wire rope.

The wire rope is divided into two departments, one department is connected to the hand crank, and the wire rope can be rolled inside the hand crank and pulled outside the hand crank by twisting the handle, which belongs to the hand crank. The other department is a wire rope that connects the drying rod at one end and the hand crank at the other. The function of the wire rope is to drive the drying rod to lift.

At present, the wire rope of most departments of drying racks is made of 202 stainless steel wire, and a few extremely high-end ones are made of 304 stainless steel wire.

Fourth, hangers. A set of drying racks will be equipped with 12 18 hangers, usually plastic hangers or wooden hangers, and some high-end products use aluminum alloy hangers, which are extremely luxurious.

Fifth, drying rods. It is usually equipped with two drying rods, at the beginning it was a stainless steel pipe, and now it is mostly an aluminum pipe of different shapes, because the aluminum appearance can be disposed of in a variety of appearances, making it look beautiful and decorative.

Sixth, the steering gear.

It is mounted on the wall and the wire rope is installed perpendicular to the hand crank through the inner pulley.

Electric it! It's up to the individual.