I can t turn on the machine, and then I keep lighting it up all at once, and then I can t see it all

Generally, not. If you don't worry, you can wait, let the water droplets evaporate naturally, and then turn on the TV.

You can first click the volume plus key and press the power button together,Then enter the factory mode,Directly empty all the data,Of course, if you find it troublesome,You can spend 50 yuan to brush the phone down,Or reinstall the system is OK。

It should be a problem with the mobile phone, and I have also had a mobile phone, so repair it.

Second, the laptop can't enter the system when it is turned on.

1. After the notebook is turned on, the power indicator light is on, if the display screen is displayed, but you can't enter the system, most of this situation is caused by system failure, you can try to turn on the F8 key, enter the safe mode, and then enter the last security configuration to try, if it still doesn't work, it is recommended to reinstall the system.

2. The laptop has entered the system interface, and it has been restarted repeatedly or with a blue screen!

In this case, it is likely that the internal hardware temperature of the computer is too high, such as the CPU fan does not rotate, the graphics card or other hardware failure, etc., or it may be a system problem, you can try whether you can reinstall the system.

3. After the notebook is turned on, the power indicator is on, but the display screen does not respond or you can hear the sound of the computer entering the desktop, which is caused by two problems, one is that the memory module is loose, and the other is that the screen line connected to the monitor inside the notebook is not in good contact, it is recommended to take it to the warranty, which is generally caused by loose internal hardware or lines.

Is it that the mobile phone has been burned by water?

For your problem, you can't turn on the machine and then keep lighting up all of a sudden, and then you can't look at it, this is probably a problem with the system, it is recommended that you go to redo a system, there are a lot of systematic teaching on the Internet, you can take a look.

Hello, it may be a dark screen failure: when the LCD is turned on, the screen will be black, first try to look at the screen with a flashlight to see if you can see the image, if you can see the image, this is the dark screen failure, most of them are the problem of the lamp. This is due to the capacitance bulge at the output end of the power supply circuit part, the phenomenon of leakage, or the short circuit of the high-voltage package, the open circuit of the high-voltage coil, the resistance may be damaged, the switch control tube is broken, or the lamp is damaged, there will be this phenomenon of turning on the boot and turning on the black screen immediately, and the lamp is very likely to be damaged.

Causes and solutions:

1. Check if the keyboard light is on, press the numlock or uppercase toggle key on the upper left corner of the keypad to see if the keyboard indicator responds. If so, pay attention to the sound of the system starting. If the keyboard light is responsive, it means that the system boots up normally, but it just doesn't show up.

2. If the graphics card is in poor contact, you need to turn on the host, take out the graphics card, wipe the connection point to wipe off the oxide film, and then install it well, and then turn it on.

3. Judge whether the host starts normally, if the host is completed normally, there will be a dripping sound. If there is no normal self-test, please check the hardware, if the keyboard does not detect it, it will not affect the machine display, but the BIOS will report an error.

4. If not.

Summary. The computer just turned on and then I didn't know what I clicked after I went in.,It's not lit up.,Hello! We'll be happy to answer for you.

1: System desktop Windows Explorer stops working. 2：

Press Ctrl+Alt+Delete to open the Task Manager, find the explorer process in the process, right-click to close, and then re-key the task.

The computer just turned on and was still on, and then I didn't know what I clicked after I went in, so it didn't turn on.

The computer just turned on and was still on, and then after entering, Hui Lu didn't go forward to stop the belt and knew what was ordered, so it didn't turn on and didn't light up, dear, hello! We'll be happy to answer for you. 1：

Hengsou System Desktop Windows Explorer stopped working. 2: Press Ctrl+Alt+Delete, open the task manager, find the explorer process in the process, right-click to close, and then re-key the task.

Hello. Related information: 3: It may also be that the computer has just been turned on, there are a lot of startup items running in the background, and the response is slow, it is recommended to close the startup items that do not need to be noisy. 4: The system is unstable, and the response of the Fu Ju is slow, so it is recommended to reinstall the positive answer version of the system.

I just boot it up, and then there's an option, I clicked OK.,And then there's a progress bar that touches the code hole.,I don't know what it is.,I started the machine again.,The screen is black at boot.,But the keyboard is bright.。

Can't click OK oh dear.

It's also possible that the system is being updated.

So how should I get this now to make his screen light up?

He just doesn't light up now because he speaks English and I don't understand it.

Can you send it to me, dear?

That's a problem with the graphics card, oh dear.

This one is going to be repaired, dear.

But he can still open it a second before he gets old.,It's a selection page that you can see your memory or something.,I don't know what to order.,And then there's a rough bar like Jingzhen**'s into Liangsen.,I shut down and restarted.,I can't open it when it's on.。

Because I ordered that CPU and couldn't bear it.

And then that's it, dear.

It is recommended that you try to change the power battery first, if it still doesn't work, the parts of the machine itself are loose or the chip is damaged by virtual soldering, common reasons: the memory is loose or the memory itself is problematic, reinsert the memory or change the memory to try; The power supply chip of the motherboard is soldered or aged, the screen cable is loose or the motherboard short-circuits the power supply circuit of the screen; Graphics card, south bridge, north bridge BGA packaging chip virtual soldering or damage, generally there are more virtual soldering, just add soldering.

There are two possibilities, one is that the motherboard is short-circuited or the motherboard is burned out, and the second is that the power supply is broken.

Heavy virus from the system to do it.