All mobile phone fans have advanced the following China Electronics CECT 10

Ect garbage! Strongly despise cect! Ect garbage!

Strongly despise cect! Ect garbage! Strongly despise cect!

Ect garbage! Strongly despise cect! Ect garbage!

Strongly despise cect! Ect garbage! Strongly despise cect!

Ect garbage! Strongly despise cect! Ect garbage!

Strongly despise cect! Ect garbage! Strongly despise cect!

Ect garbage! Strongly despise cect! Ect garbage!

Strongly despise cect! Ect garbage! Strongly despise cect!

Ect garbage! Strongly despise cect! Ect garbage!

Strongly despise cect! Ect garbage! Strongly despise cect!

Ect garbage! Strongly despise cect! Ect garbage!

Strongly despise cect! Ect garbage! Strongly despise cect!

Ect garbage! Strongly despise cect! Ect garbage!

Strongly despise cect! Ect garbage! Strongly despise cect!

Ect garbage! Strongly despise cect! Ect garbage!

Strongly despise cect! Ect garbage! Strongly despise cect!

Ect garbage! Strongly despise cect! Ect garbage!

Strongly despise cect! Ect garbage! Strongly despise cect!

Ect garbage! Strongly despise cect! Ect garbage!

Strongly despise cect! Ect garbage! Strongly despise cect!

Ect garbage! Strongly despise cect! Ect garbage!

Strongly despise cect! Ect garbage! Strongly despise cect!

Ect garbage! Strongly despise cect! Ect garbage!

Strongly despise cect! Ect garbage! Strongly despise cect!

Ect garbage! Strongly despise cect! Ect garbage!

Strongly despise cect! Ect garbage! Strongly despise cect!

Ect garbage! Strongly despise cect! Ect garbage!

Strongly despise cect! Ect garbage! Strongly despise cect!

Ect garbage! Strongly despise cect! Ect garbage!

Strongly despise cect! Ect garbage! Strongly despise cect!

Ect garbage! Strongly despise cect! Ect garbage!

Strongly despise cect! Ect garbage! Strongly despise cect!

Ect garbage! Strongly despise cect! Ect garbage!

Strongly despise cect! Ect garbage! Strongly despise cect!

Ect garbage! Strongly despise cect! Ect garbage!

Strongly despise cect!

If you want quality, don't talk about other machines, just Nokia, I can say very responsibly that Nokia machines are the best. The machine I sold Nokia grinding is very few, and the same Motorola Samsung makes people take a lot of blind boys and doesn't come back, and Nokia is pitiful, so when I sell Nokia to make a few less money, I can also shoot, but other machines don't dare!

Suggestion: Nokia 1100 450 yuan.

Noki Bikia 3100 700 dollars.

Nokia 6108 900 yuan.

Nokia 1600 650 yuan.

Nokia 6030 950 yuan.

The quality is definitely fine, and the battery is durable.

The key is that your school goes in that direction! Each school has its own research direction, and you have to choose a stronger school to have a future! Embedded development pays a little more!

After all, the embedded is mainly programming, and the hardware involves less and the profit is larger, right? But you also have to learn a single-chip microcomputer to do embedded! And C has to be learned well, now we generally use C or C++, when we learned assembly, it is a bit outdated!

To be honest, I don't think you're optimistic about self-study in advance... Don't be afraid to say it in shame! As far as the microcontroller is concerned, we were still confused after listening to the teacher's lecture!

Later, after a few course designs, it is considered a little understanding, if you have super self-learning ability, you can consider taking a look at the single-chip microcomputer 51 or something! Electronics, these disciplines are practice, and it comes first! You're more hands-on!

But I generally don't have that condition! Our teacher has a saying that understands that a single-chip microcomputer can eat for a lifetime! I feel like you'd better listen to the lectures step by step, and then learn on your own if you have the spare energy!

The older you get, the more valuable you are!! Dry electrons are like this! Experience can't be bought! Damn, it's the same board, those old engineers can be called out, you can't, this is strength! Depressed!

I think that if you have to learn all four of these subjects to have a good future, the current electronic hardware technology is developing rapidly, and now you think that the salary is very high, you learn that subject, which is very wrong. Just like the analog technology that used to be very popular, as long as you understand the circuit, you have a good job, and then a digital technology, there is nothing, the electronics industry must know a wide range of knowledge, in order to survive, now many companies engaged in hardware so-called designers, engineers, nothing, is to help the company do everything possible to reduce costs, for example, remove which part, replace that part and so on. There are not many companies with really innovative designs in China, because China's hardware design is not so advanced equipment.

Some innovations are also to connect a few parts to foreign ICs, especially single-chip microcomputers, most of the world are running with 51, which is really boring. If I hadn't only learned these things, I would have changed my career to art design a long time ago, and I felt that it was much better to have my own innovation in singing on the street than to take something designed by others in the laboratory every day to design.

These four are not directions, and it depends on whether you like to engage in hardware or software. If you want to work on software, then you need to be proficient in C language, assembly language, and if you want to go deeper, such as embedded systems, then you better learn data structures.

If you want to engage in hardware, you should be very familiar with analog circuits, digital circuits, and high-frequency circuits. But for those in school, it is necessary to learn some design software, such as Protel Pspice, which will always be used when you go out.

EDA technology, and then FPGA design use, which should be familiar with digital circuits, in my school, is the main course of microelectronics, is to design integrated circuits, simply put, to design chips. In the case of electronics, I prefer to use chips.

No matter which one you study, there is software design for sub-chips and peripheral circuit design, which is software and hardware.

In terms of salary, I feel that those who are engaged in hardware are better, and there are still fewer hardware engineers. A lot of people like software, and it's not worth much if there are more people.

I don't know much about eating youth, as far as I know, it is estimated that brain cells will die faster when engaging in software, after all, there are so many **, tens of thousands of lines, and it is dazzling to see, and only young people's brain cells are enough, and the hardware is more about experience, and you really can't figure it out if you haven't done it for more than ten or twenty years in engineering. However, there is also a lot to learn, and your learning has to keep up with the technology that is constantly being updated rapidly.

But it's all bitter.

The salary of doing embedded is high, it is possible to do twenty or thirty thousand, but it is always to cooperate with others, and it is impossible to do it completely alone. You can only do high-level part-time jobs. I have several years of experience in doing single-chip microcomputer, I can take on the project by myself first, and then start a company by myself, and there are many such people around me.

Hardware is based on accumulation, not youth rice.

It is recommended to learn a PLC control circuit, I studied electronics, but I am not interested in this subject, so I am planning to learn something else by myself to find a way.

All disciplines are learned from the most basic and lay a good foundation! Do you think you are proficient in both analog and digital electronics? I don't think there are many people who can say that they are proficient, right? That means you still need to improve.

MCU, embedded, DSP technology, EDA technology, which one you like a little more, just specialize in one. Sometimes it is better to know a lot, but it is better to be proficient in one subject.

It is recommended to learn embedded systems, FPGAs and DPS technologies, which are very hot.

If you want to work in the electronics industry, you have to keep learning, and the current technology is developing too fast, and many new technologies can be produced in a year. Like FPGAs and DSPs, they are only more than 20 years old, and if they don't learn, they will be eliminated immediately.

First of all, the single-chip microcomputer is what you must know, the most basic, not that it will have much development prospects in the future, but after you learn the single-chip microcomputer, it will be easier to learn other things, and you will find the place where the touch class is bypassed. And C programming is also one of the necessary skills, at least to accumulate tens of thousands of lines of program.

After that, you have to learn a kind of in-depth study, I personally think that FPGA will be more promising, I remember reading in a magazine, a professional**, all chips will develop in the direction of FPGA in the future. Verilog's parallel structure is unique in many ways.

It is highly recommended to learn FPGA and DPS techniques.

It's all pretty much the same. It depends on your interests and strengths.

It is highly recommended that the landlord pay attention to two (non-Japanese) mobile phones:

The look is sleek, and it's a phone (which is important), and the main camera: a 1.3 million pixel CMOS sensor.

Parallel goods ** are around 1500, and licensed goods will not exceed 2100.

Resources. K1--- This model is a new product in the second half of MOTO06,A business & fashion mobile phone after A1200,**Mobile phone,Camera function built-in。

Main camera: 2 million pixel CMOS sensor.

Zoom mode: 8x digital zoom.

Parallel goods ** are around 1500, and licensed goods are within 2130 references.

Haier PCX mobile phone N60 is designed for the pursuit of fashion, trend-leading successful business people, senior white-collar workers, stable appearance, powerful and efficient intelligent platform, super entertainment function, Haier played the strongest voice of domestic smart phones.

I just use this, I think it's pretty good, it has all the functions. Support domestic products. Bought it for 1 year without any problems.

Then use the domestic one.

My friend used Changhong's. The model I don't know, the kind that pushes the lid.

I've been using it for a few months, and I bought it for 1,000 yuan.

128M RAM, support *** MP4

1,300,000 phases. The phone is also quite beautiful.

I recommend these two first, the landlord can go to the store to see, choose. I hope my advice is helpful to you and I wish you the best of luck in buying the phone you want.

You don't have to repeat your good words.

Two phones. nokia 6070

moto l6

Good value for money and practical! ~

May you find the phone you want.

Moto's E2 and Solson's W550 Although the W550 has been on the market for a year, it is very easy to use, and it is not good to buy Nokia and its low-priced phone.

The Nokia E50 is super powerful! Believe me, that's right, the screen with 1600w colors is extremely high resolution.

Nokia 6020 is not bad, taking pictures is OK, the market price is 890

Nokia N76

**I don't know yet, it's estimated to be 2000+, but other requirements are met.

nokia6270

That's what I use, and it feels good! You might as well give it a try!

Do you want to buy a good mobile phone within k yuan??

1. The quality of all domestic mobile phones is indeed not too good, PHS is good.

Buy a nokia parallel goods are of better quality before you can buy them.

One or two years of models, such as N73, N72, the price has fallen and the domestic one has to fight to buy the domestic one, buy Xiaxin and Lenovo The quality of these two is not so much water Recommend Xiaxin As for whether it is a good battery. Anyway, it's all matched with a mobile phone.。。 You can't give him a good one, and you can't do it Easy way:

The black one is not as good as the white one (such as nokia) and some are black with a white skin (such as cect), but the domestic battery is generally black The larger the number of milliamps, the longer the standby time

In terms of quality: domestic mobile phones are indeed inferior to foreign countries, but it does not mean that the quality of domestic mobile phones is very poor, and the quality of many brands of domestic mobile phones is also good. Besides, the update speed of the mobile phone market is very fast, generally a mobile phone will be replaced for more than a year or two years (half a year is common, you may say that you have no money to change, in fact, the original very expensive mobile phone will become very affordable and cheap in a year, can you guarantee that you are not tempted?

I have changed my phone many times, so I am deeply touched by this! I believe that the quality of domestic brand mobile phones is absolutely no problem in a year or more.

In terms of signal: the impact on the signal is mainly a problem with the SIM card. Of course, it has something to do with the machine itself, but it's not much. Just buy a phone again and see if its calls are clear.