How to use the electric splint Precautions for the use of the electric splint

The splint clip is still a little curly in my hair, and mine is too.

After washing your hair first, comb a strand of hair with a comb, not too much. Pull it down vertically with a splint. But a few more times.

A burnt smell is normal drops.

Note: Be careful not to burn yourself.

You just need to get your hair wet! Then tighten and pull again with a splint! (The temperature of the splint should not be too high, turn off the power after 5-6 minutes after the power is turned on, otherwise, the temperature will be too high and the hair will be burned)!

If you can adjust the temperature, you just need to adjust the temperature to a certain degree (left and right!). And the splint tightened! (Wet hair!) ）

You'll want to start by smoothing your hair. Place a haircut between the two splints and pull down from the root of the hair, repeating several times.

Just use it a few more times to become proficient, and you must be careful not to burn it.

The repair paste should be used after clamping, and there is a kind of protection that is used before use.

Hehe, you're all wrong, listen to the professional hairstylist.

Point the splint you open to wait for his temperature to reach the maximum, the disposable hairstyle is not a perm, the temperature is not considered, of course, the splint manufacturer still knows what kind of temperature is appropriate, the hair is blown ten percent dry, that is, it is fully dry, so that whether it is straightened or curled, it can be kept for a longer time, if 9 percent of the dry hair is used to do the curling method, do it in the barber shop, and go out straight. And the conditioner should be rinsed well, otherwise it will not be able to do the styling.

If the temperature of the hair does not exceed 90 degrees, it cannot change the shape, that is, the higher the temperature, the easier it is to make the shape, and if you open it to 140 clamps straight, you have to clamp 5 times very hard. And 200 is just two clicks.

If the normal hair quality is more than 250, the hair will be burnt. That's why the maximum splint doesn't exceed 220.

There are no gaps in the splint and there are no bad consequences for the hair. As long as you pull off the scalp and it doesn't hurt, how can you pull it? Disposable splints won't hurt your hair too much.

mm, I suggest that you still use less splints, and use them on important occasions, because the current splints are very cheap and can be bought for more than 20 yuan! But it will make your hair more and more boring, and split ends will appear after a little time. I'm one of the victims, I've bought a splint for more than 300 now, and the effect is different!

But it's still rarely used! Therefore, it is also recommended that mm be used less.

If you can't clip your hair wet, it will burn off, have you ever used an electric splint for wet hair in a hairdresser? It must be completely dried before it can be clamped. I bought one at McCollin, I have to pull it slowly, with a little force, the power of the household I bought is definitely not as high as that of a professional hairdresser, so I have to pull it a few times, I use a splint like combing my hair when I go out.

It is difficult to straighten with an electric splint for natural rolling.

It is advisable to go to the barber shop to get your hair done.

The effect of holding is good.

Plug it in. You can make a good hairstyle according to your preference!

I don't think you should use that, it's a special mess of hair.

Idiot. Just read the manual

Whether it's dry or wet hair, the use of an electric splint can cause some damage to the hair. Because before using the electric splint, you must pay attention to the following precautions when using the electric splint.

Treat your hair in advance

Before using a curling iron, you should laugh at Sun Hu to prevent hair heat damage, and make sure that your hair is dry before curling it, otherwise your hair may split ends and break.

The styling time should not be too long

Do not touch the hair with the electric splint for a long time, so the damage to the hair is relatively large. It is recommended to leave the hair on the splint for about 10 seconds.

Blow dry your hair and curl it

Moist hair and try to curl hair, how much do you mm care about your hair quality? Be sure to wait for your hair to dry before curling it.

Step 1: What we have to do is to prepare tools such as hair straighteners, hair dryers, and fluffy sprays to zone the hair before creating a pear blossom hairstyle.

Step 2: Then fix the upper layer of hair, perm the lower layer of hair, and use a straightener to clip the ends of the hair to make an inward curl effect.

Step 3: When creating the curvature of your hair, you can choose a small perm, and the most important thing is to have a natural curl. After perming the lower layer of hair, lower the upper layer of hair. Then, in the same way, clip the ends of the hair to create an inward curl effect.

A plywood is a commonly used woodworking tool used to clamp two pieces of wood or other materials together for processing or gluing. For people who are using splints for the first time, there may be some unfamiliar points. Here are the steps and tips for using a splint. The mold is dry.

First, place the material to be clamped in the splint jaw and close the splint. If necessary, a wooden last or plastic gasket can be used to protect the wood surface from scratches or damage caused by clamping. Next, rotate the lever on the clamping plate until the material is clamped to the extent required.

During the use of splints, the following points need to be noted. First of all, it is necessary to ensure that the jaws of the splint are in a parallel state to ensure that the clamping material is not skewed or tilted. Secondly, the clamping mouth of the splint needs to be adjusted and checked regularly to ensure its clamping strength and accuracy.

Finally, you need to be careful when using the splint to ensure that your fingers and hands do not get pinched.

Although the splint plays an important role in processing, there are also some deficiencies in the actual operation. Some cleats may cause subtle deformation or deformation, which can lead to inaccurate cracks or gaps in the material clamped by the clamps. In addition, some cleats have a limited clamping range and cannot be used on larger or coarser materials.

To overcome these problems, one can achieve better results by choosing high-quality splints or by using multiple splints at the same time. In addition, the quality and efficiency of machining can be improved by improving the design of the splint or by using other, more complex fixtures. <>

An electric splint can straighten the hair and also make the hair curl and shiny, with the right technique. So how should you use an electric splint to make an internal buckle? Practical tricks have been posted below, come and preview.

1. To clamp your hair with a high-temperature electric splint, you first need to apply some hot water or hair care products to protect your hair, which can reduce the damage to your hair.

2. Clamp a small strand of hair, wrap the hair around the splint, roll it in, and wait for 5 seconds.

3. After all the curls are curled, use your fingers to separate the curls to make them more natural, and then apply hairspray to set them, which can keep the curls longer.

1. After the ion clip is preheated, first divide the hair clip with the hairpin and straighten it in order. The key is not to be greedy, not to clip too much hair at a time, and the effect is natural. Hold the piece between your index and middle fingers.

2. Open the ion clip and put it into the hair piece, close the clip, leave it for 1 second to let the heat spread to the hair, hold the clip and slowly pull it down in the direction of hair growth to straighten the frizzy hair.

3. After finishing the hair with an ion clip, if the effect is too smooth and shapeless, you can apply an appropriate amount of dry and hard concrete on the hair, and then put your fingers into the hair and gently rub the whole hair to make the hair strands look more fluffy and airy.

4. After wiping the styling product, straighten the hair slightly, and then use the pointed tail to comb the hair strands that you want to emphasize the style. Just use two fingers to grasp the piece and use the comb teeth to scrape backwards from top to bottom to make the strands more voluminous and erect.

5. After roughly arranging the shape, hold the hair dryer in one hand and the setting liquid in the other, and adopt the technique of blowing while spraying, so that the setting liquid is instantly dry and achieve a stronger setting effect.