Sony L39H mobile phone put it in the water and then took it out and there was a popping sound and th

Hello, my phone is also a sound problem after it is put into the water, here you don't need to worry, and you don't even need to turn it off, because the phone will flow into the horn hole when you put it in the water, but this does not affect the use, what you need to do is to wipe the water droplets on the surface, wait for the horn hole to dry automatically, your worries are superfluous, I have to clean the phone almost every day, Z1 waterproof is very professional and rest assured.

Turn off your phone. Buckle the battery.

Find a set of phone removal tools.

Then find a clean paper towel.

Wipe the small parts inside.

Water ingress is caused by short circuits in components.

Don't rush to install it after wiping it is done.

Get a ventilated sunlight out to dry for half an hour.

The sound problem is solved.

Although it is said that it is a rugged phone.

But don't experiment with it lightly.

Remove the phone battery, open the back cover, put it in the rice and stuff it for a day and a night, and if you're lucky, your phone will come back to life. If it doesn't work, send it for repair. Beg. I am doing a task.

After putting the phone into the water, it is also a sound problem, here you don't need to worry, and you don't even need to turn it off, because the phone will flow into the horn hole when you put it in the water, but this does not affect the use, what you need to do is to wipe the water droplets on the surface, wait for the horn hole to dry automatically, your worries are superfluous, I have to clean the phone almost every day, Z1 waterproof is very professional and rest assured.

If your mobile phone is flooded with water or liquid, it is recommended that you do not try to turn it on to prevent damage to the internal and pure components due to the short and boring circuit inside the machine (if the battery of the machine is removable, it is recommended to remove the battery). It is recommended that you bring the machine to the local after-sales service center, and the engineer will help you test, and the specific cost is subject to the test results of the service center.

This depends on the waveform that has been recorded now, and if it is already distorted, there is generally no way to correct it. You don't have to think about it, if there is no distortion, you can use volume automatic balance software to balance.

There is hissing cancellation and broken sound fixing. Noise cancellation for these features too.

cool edit Chinese version.

I'm fine to wash every day, I guess you're careless, and it's really watery.

Why bathe your phone when you know that there is a possibility of water.

Play games, such as cutting watermelons, and you'll find unexpected catches.

1. Press the three dots in the upper left corner of the screen in the shooting state.

2. Set the shutter sound option in the settings.

The clicking sound of Sony machine photography is generally default, and there are two ways to solve it:

2. Set it up, if not, you can try silent mode.

Click on the phone, there are three channels in the camera, click on the settings to appear, and there is a mute switch in the settings.

In addition to turning off the sound of taking pictures in the settings, or muting the phone.

Do you want to cover your ears?

The sound setting in the sound settings is to cancel the sound.

Turn on the camera, set the Sound off and you're done.

Generally, don't look for what is the cause of this situation, I don't know what the reason is without testing, so I try it directly with the following methods, if it is a mobile phone with electromechanical separation, you can take off the battery from the start to see if it is useful. Restore Lu Burn staring, recover, and see if there is still this phenomenon.

1.Shuangqing data can solve such problems; Press and hold the power button and volume down (some press plus), then enter recovery mode.

Some mobile phones are even more exceptional, you have to press and hold the volume up button, volume down button, and power on button at the same time, and release the power on and off button after the phone vibrates (volume up button, volume down button continue to hold down) to enter. All kinds of mobile phones are different, and the way to enter is also different, after entering the recovery mode, there is an Android robot with its belly open and lying on the ground. At this time, press the main menu and press the companion or house button, and you will see the operation interface.

Note that there are the following two lines after entering: wipe data factory resetwipe cache partition Some phones are volume up and down to select, and the power button is OKMove the cursor to wipe data factory reset and confirm to enter, you see a lot of no, there is a line yes, move the cursor to the yes line, and then confirm.

In this way, the first clear (step) of the double clear is completed and wait a few minutes later, and the time is slightly longer. The recovery main screen will be returned. Then enter the wipe cache partition, clear the cache, and then select yes to confirm, the second step is completed (if your phone presses and there is no response, please call your phone model + double clear).

2.Reinstating the appearance settings can solve this problem;

3.Flashing the machine should solve the problem completely; (Simple card brush, there is also a wire brush detailed tutorial please) 4If the above methods are ineffective, then you can go to the after-sales service for maintenance.

The Sony Xperia SIM card tray has a small slot.

Hang it out carefully with your fingernails.

The LT26 does not have a place for an external memory card, and the memory capacity of the LT26i is completely built-in, just like the Apple 4S.

Which one is Xperia?。。。 26.