How does a drum washing machine computer switch to a dehydrated state?

There is a computer control panel on the top of the washing machine, and there is a setting button on it, you can press it until the light flashes for spinning, and then press the setting button again, click start, so that you can spin directly.

It may be that the program of the computer board does not match the previous one, so this problem occurs, generally this kind of computer board can not be replaced at will, and it is best to touch the same thing to change.

Due to the protection function, the dehydration part of the washing machine is in a braking state after opening the cover, and it can only rotate normally when the cover is closed. Failure may be with this brake pad.

The number of dehydration times of drum automatic washing machine is also different according to different programs, and the general program is to dehydrate after washing and rinsing, so the number of dehydration times is also different for different programs.

If you mean that the drum stops for a while during each dehydration process, and then turns to continue dehydration, it is specially designed by the manufacturing enterprise, the main purpose is to make the dehydration load uniform, reduce vibration and noise, which is closely related to the manufacturing level and load of the enterprise.

Summary. Hello The steps for separate dewatering of the drum washing machine are as follows:

1. Put the clothes in the washing machine, and the clothes need to be washed by hand in advance;

2. Turn on the dehydration function and select the dehydration time according to the moisture content of the clothes;

3. For rinsing, pay attention to turning off the number of rinsing;

4. Turn on the washing function and turn off the washing time;

Press the start button to dehydrate yourself.

How to spin the drum washing machine alone.

Hello The steps for separate dehydration of the drum washing machine are as follows: 1. Put the clothes into the washing machine, and the clothes need to be washed by hand in advance; 2. Turn on the dehydration function and select the dehydration time according to the moisture content of the clothes; 3. For rinsing, pay attention to turning off the number of rinsing; 4. Turn on the washing function and turn off the washing time; Press the start button to dehydrate yourself.

Hope it helps

How to dehydrate the washing machine:

1. Turn on the power switch in the washing machine first, and then put the clothes in the washing machine. Press the program button to let the upper indicator light up at the dehydration button, then select the process and set the dehydration time, which usually takes about five minutes to complete the dehydration.

2. Click the start button again, then start to dehydrate separately in the operation, do not open the lid when dehydrating, once the washing machine is opened, it will stop immediately, often this is easy to damage the internal parts.

What to pay attention to when using the washing machine to spin dry:

1. Before using the washing machine, it must be adjusted to a stable inner cylinder, otherwise the work efficiency of the dryer will be affected during use.

2. When dehydrating clothes, be sure to close the lid on the washing machine, and do not open the lid of the washing machine during operation.

3. When the dryer of the washing machine is being dried, once the dehydration imbalance is encountered, the computer-type automatic washing machine can directly carry out the dehydration imbalance and can be corrected, if the problem has not been solved after the correction twice, it will generally stop immediately and will also sound an alarm, then it is necessary to open the lid of the washing machine, and then close the lid of the washing machine after distributing the clothes evenly, and then press the start pause mode.

1. First check the safety switch, the washing machine is turned on and the program is adjusted to the dehydration state, press the safety switch brake arm to the lowest with hands or tools, if the computer board alarms and the digital tube shows "E1", the safety switch or computer board should be replaced at this time.

2. If the brake arm of the safety switch can be dehydrated normally after pressing it with hands or tools, it means that the power-off distance of the safety switch is low, and the safety switch should be replaced at this time.

3. If in the dehydration state, only the wave wheel rotates and the inner barrel does not rotate, at this time, the tractor should be checked whether the clutch pawl and ratchet wheel have been separated, if not, it is possible that the adjustment rod nut on the drain valve is loose and worn, resulting in insufficient opening distance, at this time, the distance of the adjustment rod should be readjusted, so that the pawl and ratchet of the clutch can be separated.

The washing machine has been dehydrated because your upper cover is not covered properly, and the reason why the lid is not covered properly may also be caused by the poor contact of the travel switch inside the lid, the key is to see if the display screen shows E2. There may also be uneven clothes, and the washing machine needs to re-enter the water and wash it again after feeling uneven.

Hello, the washing machine is in a state of dehydration when it is turned on, it may be that you have washed the clothes yourself and taken them to dehydrate, in this case you can set it yourself.

Cancel the previous dehydration state can press the usual state, and then it is not the state of dehydration, the common use is the washing machine is usually washed, and then start the washing machine. It can be used normally.

1.Do you mean that when you turn on the power, you will carry out the drainage procedure, if this is the reason.

It proves that the tractor of the washing machine is broken, (that is, it is responsible for drainage) or the computer version is also broken.

2.If it is the washing machine top with water in the bottom drainage

It proves that it is a small object such as a coin or something.

It's easy to repair if you get in

There are just a few reasons.

First turn on the power switch; Then press the function button to dehydrate; Then evenly place the laundry that needs to be dehydrated; Then press the start button, the dehydration button light flashes, and the machine will be executed after 1 minute; The setting interface is single dehydration and cylinder drying; If you are not sure whether to enter single dehydration mode, you can read the instructions for operation. The specific operation method is as follows: 1. Turn on the power switch.

2. Press the function button until the corresponding dehydrated light flashes separately. 3. Open the lid of the washing machine, put in the clothes that need to be dehydrated, and distribute them evenly in the bucket. 4. Close the lid of the washing machine.

Press the start pause button, at this time, the dehydration button light flashes, and after 1 minute, the machine begins to execute the single dehydration program. 5. Some washing machines on the setting interface are "dehydrated", some are "single dehydrated", and some are "drum drying", all of which mean dehydration. If you are not sure whether the above methods can enter the single dehydration mode, you can check the operation method on the product manual, or consult the after-sales personnel for understanding.

Summary. Dear, hello, I am glad to answer for you that there is still water in the drum washing machine after dehydration A1, the position of the washing machine is uneven, because the washing machine is in the process of dehydration, because the frequency is too fast, it will be easy to vibrate, and there will be a situation of moving, if the washing machine is in the process of moving, the uneven situation occurs, the speed of the washing machine will automatically decrease, resulting in the phenomenon of not drying water, so if there is water after dehydration, it is necessary to check whether some chassis are balanced, If it is unbalanced, it will not only affect the washing effect, but also affect the life of the washing machine;

2. If the drain pipe is blocked, it may be that the stain of the drain pipe is not cleaned, the sewer pipe is blocked, and the water cannot be completely drained;

3. It may also be that the water level switch of the washing machine has not been reset normally, and the dehydration procedure cannot be completed;

4. The material and water absorption rate of clothes are different, and the water absorption rate of clothes of different materials is different, and the dehydration intensity will be different, so even if the clothes with poor water absorption are dehydrated, there will still be water.

The drum washing machine still has water in it after it is dehydrated.

Dear, hello, I am glad to answer for you that there is still water in the drum washing machine after dehydration A1, the washing machine position is uneven, because the washing machine in the process of dehydration, because the frequency is too fast, it will be easy to vibrate, there is a situation of moving, if the washing machine is in the process of moving, there is an uneven situation, the speed of the washing machine will automatically decrease, resulting in the phenomenon of not drying water, so if there is water after dehydration, it is necessary to check whether some chassis are balanced, If it is unbalanced, it will not only affect the washing effect, but also affect the life of the washing machine; 2. If the drain pipe is blocked, it may be that the stains of the drain pipe are not clean, the sewer pipe is blocked, and the water cannot be completely drained; 3. It may also be that the water level switch of the washing machine has not been reset normally, and the dehydration procedure cannot be completed; 4. The material and water absorption rate of clothes are different, and the water absorption rate of clothes of different materials is different, and the dehydration intensity will be different, so even if the clothes with poor water absorption are dehydrated, there will still be old water.

Dear, if my answer is helpful to you, please also give a thumbs up (comment in the lower left corner), look forward to your like, your efforts are very important to me, and your support is also the driving force for my progress. If you feel that my answer is still satisfactory, you can close the void reed and click on my avatar for one-on-one consultation. Finally, I wish you good health and a good mood!

Summary. Why do you need to enter the water when the drum washing machine is dehydrated, because when the clothes in the bucket are not evenly placed, there will be a large vibration, at this time, the washing machine will automatically adjust to the water inlet state, and then run the wave wheel to try to make the clothes evenly placed. If the device fails, or if the program circuit fails, this phenomenon can also occur, and the simple emergency solution is to close the water injection valve before dewatering.

Hello, I'm smaller, please wait, I'm giving you the best answers and suggestions according to your question, please wait a few minutes to hold the pure envy, and I'm sorting out the answers.

Why do you need to enter the water when the drum washing machine is dehydrated, because when the clothes in the bucket are unevenly placed, there will be a large vibration, and the washing machine will automatically adjust to the water inlet state, and then run the wave wheel to try to make the clothes evenly placed. If the device fails, or the program circuit fails, this phenomenon will also occur, and the simple emergency solution is to close the water injection valve before dehydration.