Urgent! About TP Link Installation Question 30

TP-Link WR541G+ is a 5-port broadband router, in which the color is different from the other 4 is called WAN port, and the other 4 are called LAN port. As long as the WAN port is connected to the telecommunications office, the light will be on, and if the light is not on, it means that it is not connected, and it will naturally not be able to access the network. I guess your cat is connected to the wrong route.

First of all, you must know that Telecom gives you the best line, right? Then the ** line must first pass through the modem, that is, the cat, and then the network cable pulled out by the cat is connected to the WAN port of WR541G+. The computer can be connected to any LAN.

There are two possibilities, 1There is no need for cats at home, and now most communities have a common cat, that is, users in a community share a big cat, so that the family does not need to use a cat directly to access the Internet with a network cable. 2.

If there is no big cat, then you need to install a cat to access the Internet at home, but the installer of the general telecommunications company will personally come to your home to clearly tell you whether you need a cat, and the router only plays the role of a branch line, that is to say, the function of the router is to realize that multiple people can access the Internet on a broadband account. Then you call 10,000 and ask the telecom people what they say, tell them about your situation, and the general telecom people can access the Internet when they install broadband and then leave.

If there is only a **line interface,Then there should be a cat to dial it.,Use the cat to connect the **line with the router and the network cable.,Then configure the Internet in the router (there should be an Internet bar),Try it again.。

I don't know if the foreign network is the same as the domestic network, and it is possible to use a network such as a local area network; Also, the performance of this router is not very good, and it always drops the line, so it will be better to choose a router with dlink.

It is recommended that you follow the following methods to check whether the entire setup and connection process is correct.

How to set it:

1. Set the IP of the computer to the same network segment as the router (for example, connect the network cable to the LAN port of the router and disconnect the connection to the external network (disconnect the network cable of the WAN port).

2. Enter the address to enter the router setting interface, and the PPOE user needs to set the account and password; For fixed IP users, you need to set the IP address, subnet mask, gateway, DNS server, and determine whether the MAC address is bound.

3. After setting up the router, set the IP address of the computer to "automatically obtained", and the cat is connected to the WAN port and the computer is connected to the LAN port. Cats connect to the Internet. It's ready to go.

First of all, you should really check whether the network cable is plugged in, the network cable to the modem, the cat to the router, the router to the computer,,, and then select the pppoe mode when setting. After that, just follow the steps.

Manually set the IP address, mask, gateway and DNS of the computer network card

Directly connected to the wireless setup. I didn't show up when I plugged in the network cable that day.

Hello, we are happy to answer your questions.

I'm hesitant, and if you say something too professional, you might be confused.

1. In terms of effective range, an antenna with a radius of less than 50m and 2db is the best choice, and the current wireless router is equipped with a 2db antenna as standard.

However, the wireless signal will be attenuated due to various external factors in the process of transmission. For example, the transmission distance, through the wall, signal interference, etc., if the signal wave encounters a metal medium, it will be reflected.

Therefore, there must be a wall between the distance of more than ten meters you mentioned and the straight-line distance from the computer to the wireless router. Signal attenuation is not unexpected.

2. Wireless password and routing settings page password are not a concept. Therefore, please read the manual that comes with it carefully. I can patiently explain so much, I believe you will be able to patiently read the manual.

1.Install the router.

The broadband cable is connected to the router [WAN port], the color of the WAN port is generally different from the LAN port, and the computer is connected to any port of 1 2 3 4.

After connecting the line, plug it in and check and confirm that the corresponding interface indicator is solid or flashing.

end2.Set up your router.

Set the operating computer to [Automatically obtain IP address]. If the computer has not set it, the IP address of the computer is automatically obtained by default.

Open the browser on your computer's desktop, clear the address bar and enter the router management IP address (or Kizen is, the login box pops up after enter.

When you enter the router management interface for the first time, you need to set a password for managing the router (user name: Qizhong admin, password: admin).

After entering the management interface of the router, click [Setup Wizard], and then click [Next] on Gao Fengshan.

Select PPPoE (ADSL Virtual Dialing) as Internet access mode and click Next.

Enter the Broadband and Password provided by the carrier in the corresponding settings box.

Set the SSID to be the name of the wireless network, select WPA-PSK WPA2-PSK and set [PSK Wireless Password], click [Next].

Click Finish and the setup wizard is complete.

Here's how:

1. My computer - > the address bar input or depending on the router.

2. The account and password to enter the router are: adimn lowercase letters.

3. Enter the setup wizard -- select: PPPoE (ADSL virtual dialing) -- > enter the account password provided by the telecom -- > complete.

4. Enter the wireless parameter -- >SSID number:

Frequency band: Automatic selection of 12345678910111213

Mode: 11Mbps (

Turn on the wireless function (be sure to tick it in front).

SSID broadcasting is allowed (be sure to preceded it with a checkmark).

Turn on the bridge function (be sure to tick it in front).

WPA-PSK WPA2-PSK AES encryption method.

Turn on the security settings (be sure to tick the box in front) (this item can be set according to your needs).

Security type: wep wpa wpa2wpa-psk wpa2-psk

Security Options: Automatically select WPA-PSKWPA2-PSK

Encryption Method: Tkipaes are automatically selected

PSK password: The shortest is 8 characters, and the longest is 63 characters 86400

Group key update cycle: (Unit: seconds, minimum value is 30, or 0 if not updated).

If you enter the password) do not enter the password or the password is wrong, it will not be able to connect normally. Once you are connected, you will be able to access the Internet.

6. Multiple laptops, or wireless network cards, the operation is the same as 5.

7. By the way, the general online computer IP is automatically obtained, if it doesn't work, then change to manually set the IP.

The WAN port of the infinite router is connected to the modem, and the LAN port is connected to the computer, and the user name and password are set on the router, and the router can be automatically dialed. This way, as long as the router and the cat are on, you can access the Internet.

**Line link cat, cat link router, router link computer host, always ensure that the router and cat are powered on.

Ha ha! First of all, I'll explain to you one by one, first of all, the first one you really wronged people, the connection you see is just an SSID, the name of this wireless network, this is taken casually, what the name is you don't think is strange, as for some manufacturers may be for convenience, that is, unified management, he will default it to an SSID, you just need to go in and see about it to determine its specific model. You can leave that SSID alone, second question. You say that the connection is successful but you can't go online, this really can't blame people, why, your display of successful connection is just to show that your link is successfully routed, to put it mildly, people's routing is good, you see that you have no problem connecting to the route, and then you ping the IP of its route. If it can be successful, it has nothing to do with others, which can only mean that there is a problem with the section from your routing end to the cat side.

Then this problem may be that your route is not set up properly, and of course, it is also possible that there is a problem with the line that is routed to the cat.

I don't know if you understand what I said, and if you still have questions, you can hi me.