Installation of network cables About installing network cables

Return the money, brother, I express deep sympathy for your experience, after returning the money, change telecommunications or Tietong, Tietong is more real, telecommunications is also very ghostly, you need to have more eyes with telecommunications.

Now your situation, even if he installs it for you, is a garbage line, I'd rather not.

It would be wise to ask him to return the money in exchange for telecommunications or tietong. Don't be sad, he can't eat you.

A router and a switch are required. Start by installing a router downstairs so that one of the router's two outputs connects to the machine downstairs and the other to your upstairs switch. Your two machines are connected to the switch so that you can get online.

This will ensure that all three of your machines can access the Internet at all times, which is the most convenient and fast way.

If your family's ** is also networked.

Complaints can be made directly.

You can complain with threats from this Netcom worker.

Don't take consumers seriously...

Moreover, there is more than one network provider.

It is recommended that you change the dedicated line.

In addition, Netcom or Telecom are responsible for the line failures in the area they are responsible for.

If maliciously prevaricate.

Complaints can be made against the executives of their Netcom.

Deduct their winnings!

Just add a switch!! The installation order of cats, routers, switches, and hubs is that the cat is connected to the router under the router and the router is connected to the switch and the hub is connected to the next one, and the top of yours is the router, and you can add a switch here!!

Add a small router and lead from the router to other rooms. The easiest and most practical way.

Just add a switch or hub, and nothing else.

Just make sure the line you come in has internet access.

Multiple solutions. 1.The stupidest thing is to install a network card on your machine to make a ** Disadvantages: As soon as your machine is turned off, you can't go up to another room.

2.Buy a switch.

3.How did you pick it up downstairs? Routing? Or something else? If anything else, you can consider a router.

Where are you? You can consult the router seller. But the price.

Knowing that you are a rookie will slaughter you.

If you only need a computer, buy a network cable connector. It's so cheap, if you use 2 computers, you can buy a switch.

The switch just has to be added to your home, and you have to prepare two network cables, and the switch is very simple to use, just plug it in.

Yes, you can, but you can't use both at the same time.

First of all, you have to choose whether to install Unicom broadband or telecom broadband, because I have used Unicom broadband ADSL to access the Internet, so I will explain it with Unicom broadband.

Steps: 1. Go to the Unicom business hall to handle Unicom broadband business. Unicom counter staff will open an account and password for you.

In 3 days, Unicom construction personnel will install ** line for you.

3. Connect the ** cable to the modem (that is, the "cat"); Connect one end of the network cable to the RJ45 port of the modem, and the other end of the network cable to the network cable interface of the computer.

4. Install the Unicom Broadband My World client on your computer and enter the account and password you have opened, and you will be able to access the Internet.

5. If you still want to use wireless routing to access the Internet, you can do this:

a. Go to the Unicom business hall to handle Unicom's broadband business. Unicom counter staff will open an account and password for you.

b. 2 3 days Unicom construction personnel will install the first line for you.

c. Connect the ** cable to the modem (that is, the "cat"); Connect one end of the network cable with the RJ45 interface of the modem, the other end of the network cable is connected with the WAN interface of the wireless router, and then use one end of the other network cable and any one interface of the interface of the wireless router to connect one end with the network cable of the computer, at this time you need to set up the wireless route (the specific setting can refer to the wireless router manual), and the Internet can also be accessed after the setting is completed.

Generally speaking, you only need to reserve network cables and network excuses when decorating, such as reserving network cables in the wall, buying a panel with a network and **, and the telecom installer will pick it up for you, of course, the router is not responsible for installation and commissioning.

Reserve the network cable when decorating, and then go directly to Telecom to apply for broadband, and Telecom will install ** and broadband for you.

There is a diagram on the side of the network module, according to the color of the eight-core network cable respectively access on the line, if you are preparing for the two ends of the network cable are switches, use the A connection method; If one end switches and one end PC, use the B-connection method. Also, most of today's switches support automatic port rollover, which means that it may not matter whether you use A or B, what matters is:

If you use the same connection at both ends of the network cable!

Judging from **, your network module belongs to the tool-free type, you can clamp the eight-core network cable on the corresponding slot, and then align the plastic cover and press it hard. Of course, the most reliable thing is to use a wire cutter:

It's not expensive, about 20 yuan a handful.

There should be a color next to it, just snap it in the good color.

This won't work.

Is that ** line already dialed into four megabytes?

It won't work again.

Is it far from upstairs and downstairs?

No, just put a wireless router downstairs.

Just use a wireless router, what kind of cable is it, troublesome. Put the router downstairs and connect it to the desktop, and the laptop upstairs can receive the wireless signal downstairs to access the Internet, no need to pull the cable. Besides, the ** cable is only four cores at most, and it can't be used as a network cable.

If two computers are connected to the Internet at the same time, the Internet speed is evenly divided.

Oh, then you can choose a wireless router, so that you can use wireless downstairs, upstairs, and there is a setting to distribute the speed option in the router, you can set the minimum and maximum speed of each machine. On average, you only need to set the maximum speed of each machine to 2048k.

If the branch line and the main line are connected, it should be directly connected with the branch line, in short, this problem should be found in the telecommunications wiring.

Problematic with both? Ordinary line testers only indicate that the electrical signal is passing, not that the digital signal is passable. If you're not afraid of the hassle, move the user's computer next to your device and plug it in with a standard jumper to give it a try.

If there is a cross, it means that there is a problem with the device interface or computer network card, and then change the port and computer to determine the source of the fault. Otherwise, it's a line problem.

The line tester is passed, which generally indicates that the crimping head technology has passed. But if the difference in the quality of the network cable is more than 100 meters, it is not enough to be 20 meters. I've encountered it, no matter how you look at the line, it ruined several crystal heads, and every time the line is measured, it is crossed, and finally the line is changed to solve the problem.

According to the wiring and protocol standards, the distance from the network device to the terminal is 105 meters, of which the distance to the information point (that is, the panel module on the general wall) is not more than 90 meters, and the information point to the desktop is not more than 15 meters. If the network cable is ***, a few more meters is generally not a big problem. But if you don't get 40 meters, you'll have a problem.

Test the smoothness with the instrument, and the network cable is not connected when plugged in (lower right corner), which means that another piece of your network cable is not turned on!! Does 40m 125m mean m or trillion meaning?

Sometimes the line also has directionality, you change the network cable connector on it, I connected the 80-meter network cable when it was connected is not on the network, with the tester is also good, but the computer will be disconnected for a while, just can't connect, even if it is connected, it can't be connected to the network, I put the line off a direction and connect it!! I hope it can help everyone!!