IP Conflict in LAN IP addresses cannot be configured manually

Updated on technology 2024-05-23
5 answers
  1. Anonymous users2024-02-11

    If it is an IP conflict, it should be the same as the landlord's IP before it will conflict. The automatically set IP address is automatically assigned by the router, and the automatically assigned IP address will not conflict, that is, the automatically assigned IP address is not the same. The performance is the same for manual and automatic settings, and there is no difference.

    For example, I tested it, and the landlord's ttl=64, and mine was ttl=128, and my network adapter was different from the landlord's, is it because of this? This should be the relationship between the network cable, and there will be such a situation if the network cable head is not done well. Sometimes it shows that the local connection is normal but you can't go up to anything** ask for a high finger to point down.

    This is normal. For example, if there is no signal on the cat or the router dial-up is not connected, it will be impossible to connect to the Internet. You can enter your own computer gateway in the ** column when you can't access the network, and enter the router to see if the router is not connected to the Internet.

    Let's check the reason again!

  2. Anonymous users2024-02-10

    Try another IP, try between 1 254.

  3. Anonymous users2024-02-09

    When the mobile phone is connected to the network, it shows that there is no IP assignment, which means that the number of devices connected to the current router has reached the upper limit, and a new IP address can not be assigned to the mobile phone device, so it cannot be connected to the network.

    Other reasons: 1. If the network equipment is faulty, if it is a wireless router, it may be that the DHCP service of the router is faulty, or the router is set incorrectly, resulting in the inability to assign IP addresses normally; If the wired router is old, the wired router may not be set up correctly, or the DHCP service of the wired router is faulty, resulting in the inability to assign IP addresses properly.

    2. IP address conflictIf there are multiple devices in the same network and all use the same IP address, then IP address conflict will occur, resulting in the device being unable to obtain IP address normally.

    3. Incorrect device settingsIf the network settings of the mobile phone are incorrect, such as the incorrect IP address set, or the DNS server set incorrectly, it will lead to the inability to obtain the correct IP address, resulting in the inability to connect to the network.

    4. Network congestionIf the current network congestion is severe, the DHCP server may not be able to respond to the device's request in time, resulting in the device being unable to obtain the IP address normally.

    5. Check whether the wifi network is normal, and whether the same wifi is connected to other mobile phones, and confirm whether it is wifi or mobile phone. If it is due to Wi-Fi, please restart the wireless router to check. <>

  4. Anonymous users2024-02-08

    Now that we are connected to the local area network, the upper-layer router will automatically assign an IP address at random. What should I do if the system prompts that the IP address is the same as the IP address of other devices in the LAN? In fact, we can manually specify the IP address of our own computer to solve this problem.

    2.Click quot to view the network properties quot:

    3.Find the current IP address, here is quot192 168 . 31 . 110 quot;

    4.After that, the pre-model changes the IP and clicks on the change adapter option quoton on the upper layer:

    5.Double-click the NIC you are currently using to open the current network status

    6.Click the quotProperties button:

    8.Click quot to use the following IP address quot and fill in a new IP address. The old IP was recorded before, and the new IP only needs to be changed to a tail number.

    By default, the subnet remorse mask is that the default gateway cannot be changed. It's in the previous property information. Under DNS, if the router provides this service, you can fill in the gateway address, if not, you can search for the address of the DNS server from the Internet.

    9.After the final confirmation, the IP address is changed, and it wins Don't conflict with other devices in the LAN.

    Heart of Kings 2 click to play

  5. Anonymous users2024-02-07

    How to solve the IP address conflict of the computer.

Related questions
25 answers2024-05-23

Enable DHCP in the router settings. Dynamic Host Setup Protocol (DHCP) is a local area network protocol that works using the UDP protocol and has two main purposes: to automatically assign IP addresses to users on the internal network or network service provider, and to provide internal network administrators as a means of managing all computers. >>>More

5 answers2024-05-23

Set up home and small office networks.

5 answers2024-05-23

Question 1: How to use LAN to transfer files? The next flying pigeon book software on the Internet. >>>More

20 answers2024-05-23

There is such a problem, I want to tell you, 1To set up a home or small office network on each computer that needs to share a LAN 2Set shared files and disks to share. >>>More

16 answers2024-05-23

It should be under the E switch, right?

The RJ45 header on the no interface of the E-switch is not connected according to the specification, it may be that a certain machine is connected to the LAN port next to the UpLink port of the E-switch, and for the switch with the UpLink port, this port must be left free when using the UpLink port. >>>More