How to repair the rabbit house in the meat rabbit farm, how to build the rabbit house

Hello, in which province and region do you breed meat rabbits? So that we know the specific geography of the local situation and your own conditions, and make customized considerations. Generally, the students of Xuping Rabbit Industry are one-on-one to issue a plan for the construction of rabbit houses.

There are a lot of questions you need to consider when it comes to rabbit hutch building.

In the end, relying on the construction of rabbit houses, we should achieve at least the following goals:

1. Reduce fixed input: The cost of rabbit house construction should be kept to a minimum. Try to occupy as little or no land as possible (in some provinces with relatively suitable climates, raising rabbits does not require fixed buildings, and can not change the nature of the land, which is very important for cost control).

2. Reduce labor costs: In particular, please note that the common cages on the market, such as some 2-3 layer cages, are based on the design of the brick concrete rabbit house and cage in the 1980s. And in the 1980s, it only took a few people to raise rabbits.

Ten or several hundred yuan, so the design of the rabbit cage at that time did not consider how to reduce labor costs too much. And now the personal cost is very high, so the rabbit cage used in the 80s is very inefficient and labor-intensive.

3 Disease prevention: A good cage design can prevent more than 40 diseases.

4 Income: The construction of rabbit houses should contribute to increasing the daily weight gain of rabbits.

5 The construction of rabbit houses should be considered in combination with your feeding management methods, feed nutrition, etc.

Xuping rabbit industry for 35 years, as a national meat rabbit breeding standardization demonstration base, the State Administration of Foreign Experts Affairs to introduce foreign intelligence demonstration units, very much hope that all rabbit breeders can save money and increase income in the process of rabbit breeding.

If you need to know more about the construction of cages, please search for "Chinese Rabbit King" and "Chinese Rabbit King's Space", I hope you can get help and help you understand us. Or contact us to visit Xuping rabbit industry at any time.

China Rabbit King Xuping Rabbit Industry Technical Service Department.

Make a rabbit bed The distance between the bed and the ground is 30 cm.

The rabbit house can be built at a height of 30 centimeters from the ground, and the bottom plate of the rabbit house can be made of wooden planks with pores, the rabbit house wall should be built with cement, and the front should be made of barbed wire to make the cage door of the rabbit house, and the trough and drinker should be installed on the cage door, and the rabbit house should be cleaned once a day to ensure the cleanliness of the environment during the breeding process.

1. Construction method

To build a rabbit house, choose a leeward and sunny site, and use bricks to raise the floor of the rabbit house by 30 centimeters, and then use wooden planks to build the rabbit house floor, use stone slabs made of cement to divide the rabbit house into several small compartments, and install a separate barbed wire fence to the front of each compartment as the door of the rabbit house.

2. Provide food

In the process of breeding rabbits, each rabbit should be bred separately, and troughs and drinkers should be installed on the cage door. When feeding rabbits, you can pour cereals, corn, soybean meal and other grain feed directly into the trough, and the rabbits will get up on their own to feed.

3. Clean up regularly

Rabbit is a kind of animal that loves to be clean, and the breeding process should be cleaned up once a day for it, and the feces and food residues in the rabbit house should be cleaned up to reduce the breeding of bacteria, and the trough and drinker should be disinfected once with potassium permanganate solution, so as not to affect the growth of rabbits.

4. Disease prevention

Each rabbit has limited activity space, if it is in the rabbit house for a long time, it will lead to a decrease in its immunity and easy to suffer from diseases, so in the process of breeding, it is necessary to drive the rabbit out of the rabbit house every day and put it into the activity venue to increase its activity and reduce the probability of disease.

To build a practical rabbit hutch, you can take the indoor single-row rabbit hutch and the indoor double-row rabbit hutch.

1. Indoor single-row rabbit house.

1) Prepare some rabbit cages, bricks, wooden boards, and choose a room with windows in the north and south directions as a breeding house.

2) Build a bracket with bricks and wooden boards on the north side of the room, and then place the cage on top of it, so that the cage door is facing south.

3) Dig a ditch between the wall and the cage to the north to facilitate the removal of rabbit droppings.

2. Dan La's indoor double-row rabbit house.

1) Build 1 bracket on the south and north sides of the room, and then place the rabbit cage on top so that the rabbit cages in both directions are facing each other.

2) Dig a fecal ditch on the side of the two rows of rabbit cages close to the wall to facilitate fecal discharge. Brother Nian.

Rabbit breeding precautions

1. After the rabbit becomes an adult, the male rabbit and the female rabbit should be raised separately, and the weight and growth of each rabbit should be divided into groups to avoid the situation of bullying the small.

2. Under normal circumstances, the number of adult rabbits in each group can be kept at about 25, which is not only convenient for management, but also conducive to promoting their growth.

3. Strengthen feed management, and appropriately supplement some feed at night, so as to fully meet the needs of rabbits.

4. Rabbits are afraid of heat, so vents need to be set up in the room. Rabbits are less timid and easily frightened, so the rabbit hutch needs to be located in a quiet place away from traffic.

1. Indoor single-row rabbit house: The rabbit cage is built on the north-facing side of the room, and the cage door is facing south. 2. Indoor double-row rabbit house:

A row of rabbit hutches was built in the north and south, with the middle as an aisle. 3. Sanitation and epidemic prevention: Disinfection pools should be installed at the entrance and exit of the rabbit house to avoid carrying germs into it.

4. Precautions: Rabbit hutches should be vented to avoid rabbits being heated.

1. Indoor single-row rabbit house.

Family rabbits can build an indoor single-row rabbit house, first of all, choose a room with windows in the north and south, and then build a bracket with bricks and planks on the north-facing side, put the rabbit cage on the bracket, the cage door faces south, and dig a manure ditch between the wall and the rabbit cage in the north to facilitate the discharge of rabbit feces.

2. Indoor double-row rabbit house:

When building an indoor double-row rabbit house, a bracket should be built in the direction of south and north, and then the rabbit cage should be placed on the support, so that the two rows of rabbit cages should stand opposite each other, and the middle should be set as a walkway, and the side of the two rows of rabbit cages close to the wall should be dug out of the fecal ditch, and a ventilation hole should be opened in the ground.

3. Sanitation and epidemic prevention

The rabbit house built should be installed with a trough and a water trough to facilitate the rabbit to eat, and the bottom of the rabbit cage should have a certain inclination, so as to avoid the feces can not be discharged in time, resulting in a dirty environment, and a disinfection pool should be set up at the entrance and exit of the rabbit house, which is convenient for the disinfection of the breeding personnel, so as not to carry germs into the rabbit house.

4. Precautions

Rabbits are afraid of heat, vents should be opened when building a rabbit house, to avoid a stuffy environment, and rabbits will gnaw on wooden materials to grind their teeth, all wooden materials in the rabbit house should be reinforced, or replace the materials that are resistant to bites, and rabbits are easily frightened, and the rabbit house is best established in a quiet, away from the traffic arteries.

Dear, hello, the breeding method of the fully enclosed rabbit house is positive nucleus: 1Construction of the rabbit hutch:

Fully enclosed rabbit houses need to be built on flat, ventilated and well-lit sites. The building materials of the rabbit house can use concrete, bricks and other building materials to ensure the stability and safety of the rabbit house. The interior of the rabbit house needs to be equipped with suitable rabbit cages, drinking equipment, feeders and other facilities, as well as ventilation, hood sewage, disinfection and other equipment.

2.Ventilation of the rabbit house: The fully enclosed rabbit house needs to be well ventilated, which can be mechanically ventilated or naturally ventilated.

The old air outlet needs to be installed on the walls and roof of the rabbit house in order to allow fresh air to enter the rabbit house and exhaust the dirty air in the rabbit house. 3.Temperature and humidity in the rabbit house:

Fully enclosed rabbit houses need to maintain the right temperature and humidity to improve the growth and reproduction efficiency of rabbits. Electric heaters, air conditioners and other equipment can be installed in the rabbit house to maintain a suitable temperature. Also, the floor of the rabbit house should be kept dry to prevent the rabbit from getting sick.

4.Disinfection of rabbit houses: Fully enclosed rabbit houses need to be disinfected regularly to kill germs and viruses in rabbit houses.

Disinfection can be sprayed, fumigated and other methods, and non-toxic and harmless drugs should be used for disinfection to ensure the health and safety of rabbits. 5.Rabbit rearing:

The breeding of fully enclosed rabbit houses can be carried out in the form of natural stocking or artificial breeding. Rabbit feed should be nutritionally comprehensive feed, and regularly replace drinking equipment and feeders to ensure the health and growth of rabbits.

The management methods of breeding rabbits are: pay attention to hygiene and cleanliness, reduce the probability of disease, diversify and relatively stable feed, pay attention to keeping warm in winter, prevent heat stroke in summer, prevent moisture in the plum season, keep the cage well ventilated, and do a good job of regular immunization.

1. Pay attention to hygiene and cleanliness to reduce the probability of disease.

Ensure the hygiene of the cage is the basic measure to ensure the health of the rabbit, so that the rabbit cage is ventilated and dry, often remove feces and urine, the bottom of the cage, the tableware is regularly scrubbed, and the rabbit house is cleaned frequently;

2. The feed is diversified and relatively stable.

The nutritional composition of the feed is comprehensive, so that the rabbit can grow and develop well, but the nutritional components and quantities contained in various feeds are different. Therefore, it is necessary to have a variety of feed combinations. In order to meet the needs of the rabbit body, the feed should contain a certain amount of protein, fat, carbohydrates, minerals, vitamins, etc.;

3. Pay attention to keeping warm in winter, heatstroke in summer, moisture-proof in plum season, and keep the cage well ventilated.

In winter and spring, when the temperature is lower than 8 degrees, it is necessary to do a good job of insulating the cage to prevent the invasion of cold wind. When the room temperature exceeds 35 degrees in summer, the rabbit cage must be moisture-proof and ventilated to avoid various diseases caused by environmental discomfort;

4. Do a good job of regular immunization.

Vaccinate rabbits regularly to prevent the occurrence of diseases.

Introduction to the types of rabbits

Rabbits belong taxonomically to the order Lagomorpha in mammals. The order Lagomorphes can be divided into two families, namely the pika family (pika) and the rabbit family (rabbit and hare). The rabbit family is composed of 45 species of rabbits in 11 genera, including lepus, oryctolagus and sylvilagus.

There are many breeds of rabbits, according to the statistics of the American Rabbit Breeders Association (ARBA), there are about 45 purebred rabbit breeds in the world, and then subdivided into four categories, namely food rabbits, wool rabbits, experimental rabbits and pet rabbits.

In terms of body size, it can be divided into large rabbits, medium rabbits and small rabbits. In addition, rabbits can be divided into hard-eared rabbits and soft-eared rabbits according to their ears; According to the coat, it can also be divided into long-haired rabbits and short-haired rabbits. In fact, all breeds of rabbits, as long as you have the interest and energy, can be kept as pets.

Most of the domestic pet stores sell several breeds such as Dutch rabbits, Dutch lop-eared rabbits, Angora rabbits, and Chinese white rabbits.