I want to build a spaceship, how to make a spaceship

The outer shell of the flying disc is made of mixed materials, and its structure is extremely complex, containing a series of 'blood vessels', or tubes. With a volume of 1 cubic millimeter, the outer shell of the disc has 400 components, and when the disc accelerates in flight, this hollow outer shell is extremely effective in protecting the occupants of the cabin. In other words, after the first acceleration to 80 km/s, it will maintain this speed for a certain time, then jump to 150 km/s, hold it for a certain time, and then jump to another speed, and so on (studies have found that the body's ability to withstand the acceleration of a step jump is much higher than that of a glide continuous acceleration).

When the jump accelerates, the mechanical structure will shake damagingly, and the whole structure will resonate, and this resonance will destroy the structure. To overcome this phenomenon, the disc shell is filled with tiny pipes, densely packed and criss-crossed. The pipes contain a metal that can be easily liquefied, and there is a monitoring network that allows the pressure to be measured at any time.

It's all connected in parallel to a computer inside the disc. When the computer detects the resonance phenomenon of the machine, it will automatically command the monitoring network to liquefy the metal in the pipeline in real time, so that the resonance in each part can be immediately reduced, and when the resonance disappears, the monitoring network will solidify the liquid metal. Instead of sitting in a specially made chair, as most eyewitness reports claim, the occupants floated in a special liquid.

When the aircraft is not accelerating, this liquid is discharged into the bulkhead. After landing, the aircraft crew walked on two feet. It is only when the aircraft accelerates that the liquid enters the cabin and floats the crew to reduce the pressure during acceleration and the centrifugal force generated when the cabin rotates rapidly around its axis.

This liquid can instantly turn into a solid, and at the same time, it will also change from a solid to a liquid in an instantaneous manner under vibration. (In fact, the chamber is filled with liquid-solid metamorphosis.) When the aircraft accelerates, the liquid in the cabin becomes solid, like a dinosaur fossil in a rock, which immobilizes and protects the occupants, and when it runs at a constant speed, the solid becomes liquid again.

In this way, the occupants do not need a seat and are protected) This allows the occupants to fly safely with unimaginably large accelerations.

Good idea, let's choose a place to build a factory first, it should be big enough, but I heard that the procedures are difficult to run. Take your time, we've got your back.

Kill your dean first, then liberate the mental hospital, and then the task of saving the planet is left to you. After completing the mission, hit me**, I** one of them, 200 lines, I will be your military advisor.

Spaceships are not expensive.

$100 million almost.

How to make a spaceship is as follows:Tools Ingredients: A rectangular piece of colored paper.

Steps: In the first step, first prepare a rectangular piece of colored paper.

In the second step, align the rectangular colored paper along the dotted line downwards and fold and fold it, as shown in the figure below.

In the third step, fold the traces along the dotted line in the middle of the colored paper and then open it, as shown in the figure below.

In the fourth step, the two corner tips of the confetti are folded down in line with the midline, as shown by the dotted line in the figure below.

In the fifth step, the dotted lines on the left and right sides of the colored paper are folded inward, as shown by the dotted lines in the figure below.

In the sixth step, the left and right sides of the colored paper are folded and then folded outward.

Finally, the final flip is over, and the simple confetti spaceship is folded.

Here's how to make a spaceship:Tools: scissors, cardboard, colored paper, double-sided tape, paint, tin foil, paintbrushes, drink bottles.

1. The main body of the spacecraft is a plastic bottle, and then the head is made into a sharp slag head shape through cardboard.

2. Tin foil for windows, cardboard for the tail wing.

3. Colored paper is used for flames, and pigments are used for color decoration.

4. Cut and decorate according to the steps in the figure below, and cut the bottle into a book to bend the appearance of the rocket.

5. A spaceship is ready.

The spaceship is drawn as follows:

1. Painting method 1

1. Draw the main fuselage of the spaceship first, pay attention to the symmetry of the left and right, you can first use the dotted line to trace the general outline, and then add black after determining the effect.

2. Draw a pair of power-assisted fuel tanks of the spaceship, and pay attention to the power-assisted fuel tanks that are slenderer than the main fuselage.

3. Draw the main body to help the fuel tank, the main body to help the fuel tank is the largest, which can highlight the grandeur and enormity of the spaceship.

4. Draw horizontal lines on the surface of the spaceship, so that the picture looks richer and more realistic. Pay attention to the symmetry of the left and right sides of the horizontal envy leather line.

5. Draw a flame spray for the spaceship, and color it at the end. Adding a spray can make the ship more vivid. It looks like the Admiral is about to take off.

Second, the second way to draw.

1. Draw the cabin part of the spaceship in a semi-circular shape, and draw the main body of the spaceship in the middle with two rectangles, paying attention to the symmetry of the left and right.

2. The circular triangle and semicircle draw the antennas on the spacecraft to collide, and then use two smaller rectangles to draw the bottom of the spacecraft.

3. Three circles are drawn on a rectangle to represent a spaceship's buttons. The wavy lines draw the flames burning underneath the spaceship, and the decorations of the scene are drawn on the flames, showing the appearance of the flames burning.

4. Let's paint the spaceship with a nice color. You can play as you like, as long as the colors are coordinated.

The details of how to draw a spaceship are as follows:

First, the method of regret 1: first draw a semi-circular shape of the cockpit, and draw the two antennas on the top of the cabin, then draw down the ring wing in the middle part and the landing gear in the lower part, and finally use red, yellow, gray, green, and blue to color all parts of the spacecraft, and a simple spaceship is drawn.

2. Method 2: Draw the top outline of the spaceship with curves and arcs, and then draw the device on the side of the spaceship with lines and arcs, and draw the window glass part, which is a special spaceship, a bit like a flying saucer, draw the outline of the spaceship with arcs, and then draw the bracket under the spaceship with lines and circles.

3. Method 3: First of all, draw a large oval on the bead paper, and then draw a small oval in the ellipse, which is very simple, under the ellipse just drawn, we first draw two short straight lines downward, and then draw an arc along the arc of the ellipse, and then draw some short straight lines on the side.

Fourth, method four: in the bottom of the painted ellipse, and then draw a large ellipse, very simple, in the inside of the large ellipse just drawn, close to the position below, draw an arc. The next step is to draw the windows on the ship, and on top of the arc in the middle of the spaceship, draw a row of small rectangles.

Then, draw a triangle-like part on the bottom of the spaceship, add a little decoration to the triangle at the bottom of the ship, and draw an arc-shaped line on the top of the triangle, and the spaceship is finished.