-
After we put the laces on the eyelets on both sides, we first tie the two laces in a knot. Then use the little female fingers of both hands to hook the two shoelaces. Then use the female finger and index finger of the left hand to pick up the laces from the outside in, and the right hand to pick up the laces from the inside to the outside in the same way.
Then cross the parent and index fingers of both hands with each other. At the same time as crossing, I take out the laces from the middle to both sides sequentially and tie a knot. Then tie the knot tightly and it's OK so that the laces are tied.
-
Criss-cross knots. In order to make the laces look better, you can choose 2 different colors to tie the laces to look good. As shown in the canvas shoes in the picture, the purple and white laces are crossed, which first brings a good visual enjoyment, the end of the tie is knotted on the inside, and the other end is pierced in order, jump a hole and wear it, and then repeat the tie, and the purple laces are the same.
The choice of lace color, you can match the color of your shoes, so that the shoes will look better!
-
Twist knots. How to tie your shoes to look good? Twist knots are also good, first choose a high-top canvas shoes that suit you, wear two shoelaces in a knot inside, wear out from the second hole after the two laces are crossed, tighten the laces, and see the twist you want.
How to tie shoelaces to look good? I think that's good. Of course, before that, you can go to the famous shoe library** to buy the right canvas shoes, Converse and Vance Vans brands are all good!
With a nice shoelace, you can also play to your heart's content!
-
The trapezoidal knot is also a relatively simple way to tie shoelaces. It can be seen from the step-by-step diagram of how to tie the laces well, first adjust the length of the two ends of the laces and pull out the laces from the inside out; Thread the pulled out shoelaces into the second hole from the outside to the inside; The lace on one side is threaded under the lace between the two holes on the other side, and the same is true on the other side, repeating this until the end, preferably with the excess lace knotted on the inside. The trapezoidal knot, the best way to tie your shoes, is complete.
-
After the shoelaces are fixed inside, pull outward, and repeat the Z-shaped tie method by pressing the shoelaces in and out, forming a "word" shape, half the success, be patient and look at the results, don't forget to leave the last shoe hole, hide the remaining shoelaces in the shoe, and begin to wear the second shoelace, remember the choice of a slightly narrower operation, fix it inside the shoe according to the previous practice, and also press the Z-shaped repeat in and out, forming a "word" state, pay attention to the second one is always above the first, and the color of the two laces selected is contrasting first.
-
The two laces are fastened inside and pulled outward; The two laces are crossed over each other and pulled out from the inside out; Each junction should be shoe**, preferably tightened; It is also a nice way to form a junction in the middle; After the two laces are crossed, the last hole of the shoe must be left well, so that it is done.
-
1. Ladder type
First put the left and right shoelaces into the holes on the left and right sides in the same direction, disturb the slag and then cross it, reverse it into the hole just now, and so on, until the shoelaces are in the shape of a ladder is successful.
2. Zipper type
Thread the laces into the hole first, then pull out the laces on both sides from the bottom of the middle, and thread them into the hole in reverse, and the same is true for the lower ones, and finally look like a zipper when you put it on.
3. Two-way fold and quietly
Start from the top of the shoe and wear it downward, wear it through a hole in the middle, and then go back up after reaching the bottom, and put it into the hole you just left.
4. Loop-back regression
Thread the bottom laces into the holes on both sides, then cross the laces twice in the middle, and then continue to wear them upwards to the top.
5. Hiking
Thread the laces from left to right into the four holes at the bottom, then thread the laces from the first hole into the third hole, the second hole into the fourth hole, and the same for the back, to the top.
-
There are too many ways to tie the laces of shoes, and here are a few:
The first is the diamond cross method. When tying the shoelaces, put the laces together with each other. In addition, the middle will be diamond-shaped, which is very beautiful, and the operation method is relatively simple.
The second is the two-by-two combination method. When wearing shoelaces, wear two on each side first. After wearing, cross it in a staggered position. In this way, the middle is also a beautiful diamond.
The third is the method of renting branches and ladders. When I wear a shoelace, follow the method of the stairs. Then, in the process of interspersing, let the two sides intertwine. In this way, the shape of a ladder is presented.
Fourth, the two-one cross method. Wear two first, then one. Then, the two laces are crossed together. At the end, leave a bar on it. This kind of crossover method is called the two-by-answer one-crossover method.
The fifth, the special-shaped system method of imitation wisdom. Wear two on one side and two on the right. In this way, it is like the word "different". In the end, the appearance is also similar to a "rectangle".
There are many ways to tie shoelaces, and a beautiful way to tie them will also make the shoes shine, so you can develop and research a lot.
-
4 ways to tie high-value shoelaces! Teach you how to tie your shoes in a fancy way, and make your shoes different every day.
-
Let's take a look at my space.
There are just so many ways to do it, and you can check it out.
There are pictures and explanations.
-
1. Isolateral system.
Thread the laces in both directions through each other through a hole on the same side, and eventually tie them to the same side. It looks neat and simple.
2. Square system.
Pierce two holes horizontally from the beginning of the top of the shoe, and the two strands of laces are conducted vertically into the second row of holes, and from the second row of holes cross-thread the laces, and vertically connect to the next row. You still need to be a little careful, if the hole is worn wrong, it won't look good!
3. Intricate method.
Wrap one lace around your own side of the lace and then wrap the other lace back on, and so on. The mesh vision will make the laces and shoes have a better match, forming a tight and striped feeling.
4. Triangular system.
Wear it in a triangle from one side to the end, and then pass through it in the same form of a triangle, becoming one in the second square.
5. Interlocking system.
This one looks complicated, but it's actually quite simple, just buckle the opposite rope when you go through it on the same side and back it on the other side.
6. Double-section lace tie method.
Beautiful, simple and stylish, the two ends of the laces are passed through the lace holes, and the two sections of laces are folded against each other. Then continue through the next row of holes, and so on, to the top of the shoe.
Okay, today I will introduce these six ways to tie shoes, have you learned them all? I will continue to teach you next time.
-
There are many good styles of tying shoelaces, and the common ones and methods are as follows:
1. Ladder-style laces, shaped like a ladder.
2. Zipper laces, shaped like a zipper.
3. Two-way fold-back laces, the shape is a discount, and it is also very good-looking.
4. Tie shoelaces backwards in the loop.
5. Tie shoelaces in response to each other, which is the most common method and the easiest operation.
Notes:1. According to the pattern, I believe you can tie a good shoelace.
2. Pay attention to the hidden parts and don't show them.
-
Brother Yee's same method of tying shoes, have you ever seen it?
-
How to tie shoelaces to look good? Teach you the correct way to tie your shoes, which looks good and is not easy to spread out, like it.
-
Brother Yee's same method of tying shoes, have you ever seen it?
Prepare two laces and thread them through the top and bottom holes on the left, taking care to wear them on the inside of the tongue. Follow the simplest way to tie the shoelaces before, and put the blue laces on step by step. Pick a lace of another color and thread it up and down the blue lace as if it were a weave. >>>More
Make sure that both straps are the same length. When doing this step, you should get used to both sides of the clothes, so that you can leave enough clothes to be able to tie the front buttons, ensure that the right strap does not move, wrap the left strap around the right belt, and adjust the order of the up and down straps. Place the left strap underneath and the right strap on top. >>>More
The reason why you steam a lot of water on top is actually because your flour is not enough, and then its pastry can't be shaped, so there will be a lot of water, which is something to be aware of.
If you want to have a beautiful life, you must be hopeful about life. As for any person, no one's life does not need to be obtained through hard work, it must be fought for. A beautiful life is the life you want to live. >>>More
To raise an excellent boy, you must do these things.