What is the problem with the computer restarting in the middle of play

Summary. This could be an unexpected restart or crash of your computer. It can be caused by a system error, program conflict, or hardware failure.

As a workaround, try restarting your PC to see if you can get into the game normally. If the issue persists, you may want to check your PC's hardware and software settings to make sure they match the requirements of the game. If the problem persists, it is recommended to contact professional technical support or seek a computer repair service to resolve the issue.

Hope it helps!

This could be an unexpected restart or crash of your computer. It may be caused by a system error, program conflict, or hardware failure. As a workaround, try restarting your PC to see if you can get into the game normally.

If the issue persists, you may want to check your PC's hardware and software settings to make sure they match the requirements of the game. If the problem still cannot be solved, it is recommended to contact professional technical support or seek computer repair services to solve the problem. Hope it helps!

Stool chain chain. Can you add, I don't quite understand it.

This can be caused by a computer restart or crash. Restart the computer, check the hardware and software settings, contact the system with professional technical support, or seek a computer repair service to resolve the issue. Hope it helps!

Rebooting in the middle of a game? What could be the reason? The possible causes and solutions are as follows:

1. There is a relatively high probability of system reboot caused by poor thermal stability of memory, chip damage or memory problems caused by wrong settings.

The thermal stability of the memory is poor, and it can work normally when it is booted, but when the memory temperature rises to a certain temperature, it will not work normally, resulting in a crash or restart. Memory chips.

When it is slightly damaged, it can be self-tested at boot (setting fast start does not fully detect memory), or it can enter a normal desktop for normal operation, and it will restart or crash when running some software with large Io throughput (****, games, flat 3D drawing).

Solution: Replace the memory. Setting the CAS value of the memory to too small will also cause the memory to be unstable, causing the system to automatically restart. In general, it is best to use the default settings of the BIOS and do not change them yourself.

The temperature is too high or the cache is corrupted.

CPU temperature.

Too high often results in a protective auto-restart. The reason for the high temperature is basically due to the poor heat dissipation of the chassis and CPU, and the reasons for poor CPU heat dissipation are: The thermal conductivity of the material of the heat sink.

Low, there is a foreign object between the contact surface between the heatsink and the CPU (mostly for warranty posts), the fan speed is low, the fan and the heatsink accumulate too much dust, etc. In addition, the temperature measurement probe under the CPU of the P2 P3 motherboard is damaged or the temperature measurement circuit inside the P4 CPU is damaged, the BIOS on the motherboard has a bug, the temperature measurement is inaccurate under a special condition, and the CPU protection temperature set in the CMOS is too low, etc., which will also cause a protective restart.

Workaround: Mask L2 or L1 cache in CMOS, or replace CPU exclusion.

1- CPU overheating temperature protection. Check the cooling system and update the thermal paste (handle with care).

2- Graphics card overheating temperature protection. Check the cooling system, fans.

3- After eliminating the above problems, this is still the case: eighty percent of the power supply is insufficient (the power supply is inefficient, and the electrolytic capacitor in the power supply is inefficient, which needs to be updated).

A CPU failure causes the computer to restart automatically. Check whether the fan of the CPU is working properly, whether the contact between the thermal conductive sheet and the CPU is tight, and it is best to coat it with thermally conductive silicone. Because if the CPU of the computer is not well dissipated, it will cause the temperature to be too high and cause automatic restart.

A memory failure causes the computer to restart automatically. Whether it is caused by memory incompatibility.

The computer automatically restarts due to the incorrect BIOS settings. From the BIOS, you can set the HDD overheating auto shutdown and CPU overheating auto.

A power failure causes the computer to restart automatically. A damaged power supply or an unstable voltage in your home can also cause your computer to restart automatically.

Is there something wrong with your computer? Otherwise, it won't be restarted at once, and then half restarted. Turn the computer off again and turn it on again to see if there is such a problem? If there is still such a problem, it will be repaired.

Take a look at the system log to see if there are any programs that have gone wrong.

Check for programs running in the background, close suspicious programs and delete their files.

Check the hardware to see if there are any problems such as poor contact, high chassis temperature, etc.

The chassis temperature is too high.

You can buy a few fans and install them inside, the fans are big and small, pay attention to the hole spacing of the fan position in the case, don't buy it and install it.

It is possible that the CPU temperature is too high and causes the restart, it is recommended to use Master Lu or PC Manager to check the CPU temperature, if it is too high, you can clean the heat sink dust or change the heat sink.

Follow the steps below to close the empty rubber for troubleshooting:

1. First check whether the CPU fan, graphics card fan, power supply car fan, etc. are slow or stopped, causing problems caused by high internal temperature of the computer.

2. Check whether the power supply is insufficient, whether the power output is stable, and replace the power supply test, if the power supply is changed, it will be normal, and the power supply will be damaged.

3. If the power supply is still the same, consider that there is a problem with the computer system, and reinstall the original operating system first.

4. If you reinstall the system, you need to further check the motherboard, memory, hard disk and other hardware, and use the replacement method to determine the faulty hardware, and replace it.