Nokia 6030 common commands

can be displayed, I have used 6030. You haven't bought it yet, have you? There will be no problem with these 3 checks, and now the 6030 licensed goods ** are about 700, which is good and has a good performance!! !! with headphones

Nokia Mobile Directives.

Check imei, * check the version.

If EFR is enabled and enhanced full-rate encoding is enabled, it is disabled.

If HR is enabled and the enhanced half-rate encoding function is turned off.

It is to check the production date, check the talk time, etc.

Turn off the clock of the SIM card and go to sleep, which can save 30%! How to remove: Turn on the clock to reset it!

Check the Bluetooth chip address.

Restore factory settings (soft grid, C disk content will be emptied, and then start writing new system information).

Factory reset (this is different from the grid machine, the display and settings are changed after execution, and the C drive files will not be cleared).

9. Hard grid machine, operation steps: turn off first, press the dial key * 3 key in the shutdown state, remember to hold these three keys at the same time, and then press the power on until the screen shows formatimg.

You can initialize the wallet password, and then you can reset the password.

PW 1234567890 1 to check whether to lock the frequency, PW 1234567890 2 to check whether to lock the country code, PW 1234567890 3 to check whether to lock the country code, PW 1234567890 4 to check whether to lock the SIM card. (Special note: p and w and press * in standby mode to switch out).

Original security password.

IMEI code, which is what we call the mobile phone serial number, almost all mobile phones are applicable, IMEI is the "international mobile equipment identification code", IMEI = tac + FAC + SNR + SP, where TAC is the approved number, a total of 6 digits, FAC is the last assembly place **, a total of 2 digits, but because there is now JS has been able to change the serial number, so nokia will change all the bits to 00, that is, it is no longer possible to see the place of production, SNR is the serial number, a total of 6 digits, SP is a spare code, just 1 digit.

Mobile phone version information, a total of 3 lines of information will appear after the display, the first line is the current version of the mobile phone software, the latest version is the version, the second line is the release date of this version of the software, the release time of this version is June 28, 2004, and the third line is the mobile phone model**.

Restore factory settings (soft grid), this command is generally in the case of the phone is in the wrong or too much system garbage to use the grid command, before the grid machine can be backed up by third-party software or 6600pc kit to back up your business card holder or the information you need, be sure to keep the power sufficient when the grid machine, do not bring a charger grid machine, only display the word "nokia" and the screen when the grid is not finished, do not force the shutdown and pull out the battery, so as not to cause serious consequences, re-enter the time after the grid machine is completed, Then restore your business card holder and data on it, the grid machine can restore all the original settings, empty all the contents of the C: disk, and then write new system information, note that this grid machine does not affect the content of the MMC card.

Restore factory settings,Equivalent to the function table - tools - settings - mobile phone settings - general - original factory settings,Note that this command is only to restore the settings,Different from the grid machine,After recovery, the business card holder、**、Documents, etc. all still exist,It's just that the settings are restored,Some friends don't know how to change it back because of the wrong settings You can use this command。

The total talk time displayed.

This command is the instruction of the wallet initialization password, many friends have forgotten the wallet password and have not been able to use the wallet, after using this command, you can initialize the wallet password, you can re-enter the password yourself, but it should be noted that once this command is used, all the data in the wallet is lost, remember.

Some of the above secret skills need to enter the lock code, the lock code here is the mobile phone password, but don't be confused with the SIM card password, the mobile phone lock code is set in: function table - tools - settings - security settings - mobile phone and SIM card - lock code, its initial lock code is: 12345, as long as the default value of the lock code is 12345, the new lock code shall prevail if the mobile phone lock code has been changed!

* It's formatting the phone, nothing else matters.

Restore factory settings,Equivalent to the function table - tools - settings - mobile phone settings - general - original factory settings,Note that this command is only to restore the settings,Different from the grid machine,After recovery, the business card holder、**、Documents, etc. all still exist,It's just that the settings are restored,Some friends don't know how to change it back because of the wrong settings You can use this command。

Restore factory settings (soft grid), this command is generally in the case of the phone is in the wrong or too much system garbage to use the grid command, before the grid machine can be backed up by third-party software or 6600pc kit to back up your business card holder or the information you need, be sure to keep the power sufficient when the grid machine, do not bring a charger grid machine, only display the word "nokia" and the screen when the grid is not finished, do not force the shutdown and pull out the battery, so as not to cause serious consequences, re-enter the time after the grid machine is completed, Then restore your business card holder and data on it, the grid machine can restore all the original settings, empty all the contents of the C: disk, and then write new system information, note that this grid machine does not affect the content of the MMC card.

When Nokia appears on the inner screen, press Clrt + Shift + F at the same time, and then select the format of the phone, and it will take about a minute to restore the factory settings.

This will not remove the Chinese, mine is also Oushui Chinese, once qualified, Chinese is fine.

However, please back up important information before registering!

Nokia Mobile Phone Restriction Code 1234 Password 12345 : Look at the serial number of the phone.

IMEI code, which is what we call the mobile phone serial number, almost all mobile phones are applicable, IMEI is the "international mobile equipment identification code", IMEI = tac + FAC + SNR + SP, where TAC is the approved number, a total of 6 digits, FAC is the last assembly place **, a total of 2 digits, but because there is now JS has been able to change the serial number, so nokia will change all the bits to 00, that is, it is no longer possible to see the place of production, SNR is the serial number, a total of 6 digits, SP is a spare code, just 1 digit.

Mobile phone version information,A total of 3 lines of information will appear after display,The first line is the current version of the mobile phone software,The latest version is V,The second line is the release date of this version of the software,The current release time of the latest version is 04/5/11,The third line is the mobile phone model**,Big * land licensed goods are generally RH-51。

Restore factory settings (soft grid), this command is generally in the case of the phone is in the wrong or too much system garbage to use the grid command, before the grid machine can be backed up by third-party software or 6600pc kit to back up your business card holder or the information you need, be sure to keep the power sufficient when the grid machine, do not bring a charger grid machine, only display the word "nokia" and the screen when the grid is not finished, do not force the shutdown and pull out the battery, so as not to cause serious consequences, re-enter the time after the grid machine is completed, Then restore your business card holder and data on it, the grid machine can restore all the original settings, empty all the contents of the C: disk, and then write new system information, note that this grid machine does not affect the content of the MMC card.

Restore factory settings,Equivalent to the function table settings - mobile phone settings - regular - factory settings,Note that this command is only to restore the settings,Different from the grid machine,After recovery, the business card holder、**、Documents, etc. all still exist,It's just that the settings are restored,Some friends don't know how to change it back because of the wrong setting of the dry sale and you can use this command。

This command is the instruction of the wallet initialization password, many friends have forgotten the wallet password and have not been able to use the wallet, after using this command, you can initialize the wallet password, you can re-enter the password yourself, but it should be noted that once this command is used, all the data in the wallet is lost, remember.

Bluetooth device query code, you can find the device code of the built-in Bluetooth module, which has no effect on ordinary people.

Some of the above instructions are required to enter the lock code, the lock code here is the mobile phone password, but don't be confused with the SIM card password, the mobile phone lock code is set in: function table - settings - security settings - mobile phone and SIM card - lock code, its initial file lock code is: 12345, as long as the default value of the lock code is 12345, the new lock code shall prevail if the mobile phone lock code is changed.

Grid machine must see - S60 mobile phone system file details.