Nokia can t get internet access 50

It is most convenient to use the UCweb browser to access the Internet.

Or maybe your access point is wrong.

GPRS parameters of China Unicom

For GPRS phones, the main parameters that need to be set:

1) Connection Name: China Unicom (GPRS).

2) Data bearing mode: GPRS

3) Access Point Name: UNIWAP

4) Username: None.

5) Password: None.

6) Identification: Ordinary.

8) Home: 9) Connection Security: Off.

10) Connection Type: Permanent.

11) Optional port: 80 9201

9) Connection Security: Off.

10) Connection Type: Permanent.

Move the GPRS parameters

1) Connection Name: China Mobile (GPRS).

2) Data bearing mode: GPRS

3) Access Point Name: cnwap

4) Username: None.

5) Password: None.

6) Identification: Ordinary.

8) Home: 9) Connection Security: Off.

10) Connection Type: Permanent.

11) Optional port: 80 9201

9) Connection Security: Off.

10) Connection Type: Permanent.

Switch to a UCweb browser. There is a problem with the native,

Change the browser, UC is very easy to use, or you have a problem with your machine.

It could be an input error.

Generally, it starts with wap, not www.

Save money with UC Webbar.

This is done by resetting the Internet Access Point.

1. Set up the Internet service first.

Name: Default (My Network), you can change it to your favorite name.

Set the AP name to cmnet. Other defaults are sufficient. There is no need to set the **server address and port.

2. Set up the WAP service.

Name: Default (My Network), you can change it to your favorite name.

Packet Data Access Point: CMWAP

Network type: IPv4

Authentication Type: Common

Username: (empty).

Password: (empty).

**:Initiate.

**Port: 80

If you can't connect, consider the following scenarios.

1.Turn off battery saver mode, or connect the charger to your phone: , tap Set battery saver mode off.

2.Stay close to a Wi-Fi access point for a better signal.

3.If possible, try establishing a connection with another Wi-Fi-enabled device (to make sure this access point is actually working).

4.If you're using a home Wi-Fi network.

Unplug your Wi-Fi router and turn off your phone. Plug the router back in and wait 1 minute before turning your phone on. In your router's settings, temporarily remove the Wi-Fi security settings, and then try creating a Wi-Fi connection on your phone without any security settings first.

5.On your phone: Tap Settings Bluetooth, then temporarily toggle the status to off.

Delete your working Wi-Fi network and reconnect: Go to Settings Wi-Fi management (advanced). Under Known Networks, press and hold the network name and select Delete.

Tap Back and select a network from the list. Check if there is new software for your phone: Tap Settings Phone Update.

6.If you're using a public Wi-Fi network, chances are that all IP addresses are occupied. Try connecting to a different Wi-Fi network.

The network parameters in the mobile phone have been changed, type 10086 to tell the staff the mobile phone model, and then they will send you an application setting, you can accept it! Or, reinstate your appearance!

You first make sure that you have no downtime, if there is no downtime and restart the phone, if not. Just look at the connection settings of the mobile phone, Nokia's mobile phone has two connected browsers, one is connected to www, and the other is connected to WAP, you have to distinguish what network you want to connect to. With the right browser, it is recommended to use a UC browser, if it still doesn't work, it may be that the connection settings are broken.

You call 10086Just ask him to send you a correct network connection setting, and you can extract it directly.

Check that the network settings are correct.

Then restarting your phone still doesn't fix it.

It should be a problem with the operator's network.

See if the network settings **address and port are mobile.

Go to the mobile hall to do it, the best, don't worry about it yourself. Thank you for adopting.

If your mobile phone cannot access the Internet, we recommend that you troubleshoot the problem in the following ways:

Check whether there is a network, it is recommended that you can use it in a place with a strong signal;

Check whether there is still a credit in the account, if the balance is insufficient, you need to recharge before you can use it;

Confirm whether the parameters of the mobile phone have been set;

Check whether the USIM card is inserted, if it has been inserted but still cannot be used, it is recommended that you go to the business hall to check whether the USIM card is faulty, or replace the card for testing;

Check whether there is a problem with the mobile phone, it is recommended that you change the phone for testing;

When the total traffic generated by the Internet reaches the maximum traffic cap value in the current month, the system will automatically turn off the Internet access function, and the Internet access will be automatically resumed in the next month.

If the number is not registered with the real name, and the real-name registration is not completed within the time limit, the service will be suspended.

If it still cannot be used normally after self-service troubleshooting, it is recommended that you contact the local customer service for verification and processing.

Take a look at your access point settings!

There's a network setup.

Changed to CMWAP

Don't cmnet

There will be a deduction for this.

Choose to be inside Monternet!

Make sure you don't have downtime!

1. If the opportunity allows; Restart the wireless router; See if you can solve the problem.

2. In Make sure your phone is within the wireless network coverage range, click "Scan" to refresh the wireless network list.

3. Connect the computer to the router through the network cable and log in to the management interface of the router.

4. In Wireless Settings - Basic Settings, the channel is between 1 and 11, the wireless function is turned on, and the router is restarted.

2: What should I do if I search for a wireless signal and the connection is unsuccessful.

1. The unsuccessful wireless connection may be caused by incorrect settings of wireless password and other parameters. A new key entry attempt.

2. Please make sure that the wireless router does not have the wireless MAC address filtering function enabled; Wireless Settings - Wireless MAC address filtering, turn off the wireless MAC address filtering function Wireless Settings - Wireless MAC address filtering, turn off the wireless MAC address filtering function.

Three: What should I do if the wireless connection is successful and I can't open the web page?

First of all, check whether the router is connected to the external network, log in to the router management interface, and look at the running status - WAN port status, if it is 0, please follow the router quick setup guide to set it again.

2. If the computer can access the Internet, the mobile phone cannot; Check whether the SSID number of the wireless router is in Chinese; If it is changed to letters and numbers; Mobile phones sometimes can't effectively recognize Chinese:

3. If the above does not contain the absolute solution: we set a static IP for the mobile phone

4. The wireless router supports between 15-20 wireless devices; When the maximum number of connected wireless devices is exceeded, although Cong Town is connected to the wireless network; But you're wireless; At this time, you can unplug the wireless router; Turn on the wireless router after 10 minutes.

It is recommended that you install a software called ucweb browser,You search for it again"Love Nokia mobile phone forum",This place has this software,I use the Internet,And it's www Internet,It's the same as computer Internet access,And you can upload it,**Large-capacity attachments。

It is recommended that you install it.