What is the reason why the digital camera will automatically shut down immediately after it enters t

It is caused by a bad contact with the battery!

Summary. After turning it off, there is a small hole in the bottom of the camera, which can be restored to factory settings with a toothpick. Just turn it back on.

After turning it off, there is a small hole in the bottom of the camera, which can be restored to factory settings with a toothpick. Just turn it back on.

If not, only take it to the after-sales service center for testing.

I hope mine can help you.

Satisfied with my service, give a thumbs up, kneel and thank you.

Thank you. You are welcome.

Satisfied with my service, give a thumbs up, kneel and thank you.

Compare the heart] [compare the heart] [compare the heart].

The camera can be turned on normally when there is no memory card, but what should I do if I put in the memory card and it cannot be turned on?

If your SD card system is not compatible, it may only be possible to use SD cards and you have SDHC, or the speed is not fast enough, or the card is broken.

I hope mine can help you.

Satisfied with my service, give a thumbs up, kneel and thank you.

Than the heart] [than the heart].

This fault is easier to judge, first, first change a pair of new rechargeable batteries to test. Second, put your ears close to the camera when you turn on the camera, block the camera when shooting, and listen to the sound of the lens. After turning on the camera, press the zoom button several times to see if the sound of the lens moving smoothly during the zoom is smooth.

If the sound is astringent, it means that the lens zoom track needs to be cleaned, and this problem is generally much more common, so it will also cause the failure of the camera's power consumption.

There are 2 possibilities:1Electromagnetic aging, it should be normal after replacing the electromagnetic. 2.The motherboard begins to leak when it ages, but it is rare. You can buy 2 rechargeable batteries and try them out! Thank you!

All rechargeable batteries and primary batteries do not discharge well at low temperatures. So maybe the situation you're talking about is normal.

In one case, the rechargeable battery lasts for a long time, and the performance decreases. Sometimes the reason for two batteries has not worked, and there will be the situation you said. Please indicate the other batteries and take pictures at room temperature.

The thing about the charging battery, that is, the battery is aging, three years is good, charging the battery, the number of times it is used is less, and it is not a good thing to not flush after discharging Buy a few new batteries Buy a few new batteries There is no problem with the camera, and the after-sales service is right Buy a battery and buy a large capacity

The card is broken; Illegal Operations.

remove the card when it is turned on); The battery is actually dead, but the display icon is still full; It's also possible that your previous illegal operations caused the camera to crash.

i.e. crash), when rebooting, the camera will automatically shut down, and then the LCD will display "Please reboot!" "Information (as far as I know, casio will have a hint). Or if the lens is stuck, and the lens is not fully extended when the camera is turned on, the camera will sound an alarm and then automatically shut down.

If the power is off, Chang Zhi will not make any sound, and the screen will be directly black, and the liquid resistance will be large.

The LED indicator is also not on.

Is there still such a problem after replacing the battery? There are many reasons why the camera automatically shuts down. You try to change the memory card first, or remove the card, if it is OK to change the card, then your memory card may be broken.

If you don't insert a card, it won't, that is to say, it won't automatically shut down if you don't have a card, that's a camera card reader.

Or if the flashic fails to automatically shut down like changing the battery, then there will be many reasons for this situation, Lens is the lens, power IC, etc., it is recommended to send it for repair. In short, it needs to be analyzed in detail.

Whether it is turned on for a period of time and not used, and turned off, then please see if the buried is set to automatically shut down.

1.The camera will have an automatic shutdown time limit, such as 3 minutes, 10 minutes, etc.

2 The second thing that should be thought of is that the battery is running low - digital cameras are a big power guzzler, and it is not uncommon for them to shut down due to low battery power. Replace the battery.

3 If the digital camera still won't turn on after replacing the battery, and you find that the camera is hot, it is because you have used the camera continuously for too long, causing the camera to overheat and turn off automatically. Discontinue use and wait for it to cool down before using it.

4.Return to the factory for repair.

If the phone's camera shuts down as soon as it is turned on, it is very likely that the software is incompatible, resulting in the shutdown.

Back up the files first, it is recommended to double clear the phone to solve the phone failure.

1、?If no data has been backed up before, the action will erase the personal data.

2. Press and hold the volume button + power button to turn on the power on and there is an image of a robot on the machine Press the home button.

3. Select Wipe Data Factory Reset and press the Menu button to restore factory settings.

4. Then select Reboot Aystem Now and press the Menu button to restart.

It is recommended that the landlord first confirm the situation of the camera battery, if there is no problem with the battery, it is the hardware failure of the camera, and you need to contact the after-sales service of the camera manufacturer or the nearby camera repair company for specific inspection and repair.

Personal advice and opinions for your reference:

If you confirm that the battery has enough power, please ask them to test it after the sale, if there is a problem, the warranty period will be free of Xunling fee to help you solve the mu Qingqi.

Hello! "Digital cameras often turn off automatically during shooting" is usually a problem of insufficient power supply.

Recommendation: Please check if the battery is fully charged.

Insufficient battery power (or deterioration of battery storage capacity) or oxidation dirt on the contacts between the battery and the camera can cause the camera to not work properly.

Should: a. Make sure the battery is fully charged, if the battery is aging, it should be replaced with a new battery;

b. If there is oxidation dirt on the contact between the battery and the camera (which may not be distinguishable by the naked eye), the larger current of the digital camera will not be able to pass smoothly when it is working, which will of course cause the digital camera to shut down automatically.

Oxidized dirt on the contacts between the battery and the camera should be cleaned to ensure good contact.