Please ask the access control suitable for installation in the main gate of the unit No, not the inn

Electric lock can be divided into two kinds of power-off open, and power-off closed, usually the channel door requires the installation of power-off open, bank vault financial room and other security level to install power-off closed, what you are talking about is power-off lock, controller, electric lock, software, computer, signal line and other faults will not cause the door to open, mainly to see where there is a problem, such as the controller if the relay is broken normally closed, can not be closed will lead to the electric lock can not be powered normally and you are installed power-off lock, so it will be opened. Usually, the chance of encountering such a situation with electricity is very small and small, so you can not consider it. If there is a card, you can't get in by swiping the card, it may be a software or device problem, and the device is broken, even if you enter the password, you can't open the door.

According to your needs, it is recommended that you install a cathode lock, so that you can open the door by swiping the card, and you can also open it with a key if the access control fails.

The main function of access control is to be used during the day, you say that it is impossible to prevent theft, add a mechanical lock to use it at night, to be honest, if a thief wants to steal your things, any way can open the door.

It must be installed, the electric lock can be divided into two kinds of power-off open, and power-off closed, usually the channel door requires the installation of power-off open, and more factors should be considered when installing, such as card reader, limiter, wiring, control mode, door closer, and so on.

Article 49 of the Law on Public Security Administration Punishments.

Those who steal, defraud, rob, snatch, extort, or intentionally damage public or private property are to be detained for between 5 and 10 days, and may be concurrently fined up to 500 RMB; where the circumstances are more serious, they are to be detained for between 10 and 15 days, and may be concurrently fined up to 1,000 RMB.

Article 275 of the Criminal Law.

Where public or private property is intentionally destroyed, and the amount is relatively large or there are other serious circumstances, a sentence of up to three years imprisonment, short-term detention, or a fine is to be given; Where the amount involved is huge, or the person accompanying the person has other particularly serious circumstances, he shall be sentenced to fixed-term imprisonment of not less than three years but not more than seven years.

Summary. According to different security requirements, it is necessary to further judge whether it is necessary to equip a door closer after installing the access control system. If you're in a lab, workshop, or critical equipment room, a door closer can help improve safety.

In addition, if there are strict safety requirements, it is also recommended to install door closers to ensure safety.

The monitoring center door is equipped with access control, and there is no need to install a door closer.

According to different security requirements, it is necessary to further judge whether it is necessary to equip a door closer after installing the access control system. If you're in a lab, workshop, or critical equipment room, a door closer can help improve safety. In addition, if there are strict safety requirements, it is also recommended to install door closers to ensure safety.

Can you tell us more about that?

After installing the access control system, different door closer models can be selected according to the actual use needs. Generally speaking, in places with strict safety requirements, a high-safety door closer with an automatic reset function that can suppress harmful behaviors can be selected to ensure safety performance. In ordinary places, you can choose ordinary door closers with low power consumption and ultra-long life to save power and reduce costs.

There is no fixed one for the installation of the access control.

This is related to the specifications you want to install.

There are also many factors.

If you're not sure, it's recommended that you go to InstallPass to take a look.

This is a B2B platform in the installation industry, which is relatively well-known in the industry.

If you don't know anything about this.

It is recommended to take a look online.

Find some big, professional platforms.

Install passIt is such a platform that has many access control manufacturers.

It can help you a lot.

Access control installation on door requirements.

The access control system can be divided into local pipelines and system pipelines, and local pipelines generally refer to the card reader, controller, electric lock, and wiring before opening the door; A system pipeline is the connection between controllers and power lines. The local pipeline can be intersected or parallel to the laying of the system pipeline, but the following points need to be noted.

In order to avoid signal interference, the power line and the signal line should be threaded separately, and the distance between the two pipes is required to be more than 30cm;

The power supply should meet the specifications, under normal circumstances, the 220V AC power is supplied to each access control point through the management center, and if the nearest power supply is used, it is necessary to pay attention to the relevant specifications;

For future maintenance and debugging, pay attention to marking when threading, and the connector should be placed in the junction box.

Installation of access control sensor heads.

Attention should be paid to the following points in the installation of the induction head:

The installation is to pay attention to dustproof, and try to avoid dust entering the induction head;

The induction head should be installed as close to the control door as possible;

In order to avoid interference, the installation position of the sensor head should be far away from the magnetic field, and if it is installed on a metal object, the metal should be cut off and the height should be about 2 cm.

In order to facilitate future maintenance and installation, the wiring in the wall hole should be neat and organized;

Installation of access controllers.

In order to avoid man-made damage to the greatest extent, the controller should be installed indoors, and the installation position of the controller should be as close to the sensor as possible, generally about 120 meters;

The selection of controller screws, the controller mounting panel should be fastened with self-tapping screws;

After installation and commissioning, the controller should be locked to ensure safety.

Installation of electric locks for access control.

When installing and renovating the door, the power cord and control line should be laid in advance, buried in the door or door frame, and a certain length should be reserved to access the electric lock.

During installation, the electric lock and lock should be tested and debugged, the bite should be accurate, and it can be retracted normally when the door is opened and closed;

The installation of the electric lock cannot be simple, and the door can be locked smoothly, for example, the yin lock and the yang lock should be able to close the door without obvious looseness; The mortise lock or electric clamp lock should be flush with the corresponding door or shaft after locking; The magnetic lock should not feel like a significant impact when the door is closed vigorously, and it would be better if the door closer could be installed.

Of course, the glass door is suitable for installing electric plug locks, anti-theft doors and fire doors are suitable for installing magnetic locks, the most used are these two kinds of doors, if it is other doors, you have to see the actual situation of the door.

No, as long as the wiring environment is not too obstructive, the door is basically not much of a problem, but it is best to find a professional to look at the scene.