How to connect the binding post of Daikin air conditioner 3 hp cabinet unit?

1. The air conditioner has no plug, and a 16A three-pin plug can be installed separately.

Dear, I'm glad to answer for you: Daikin air conditioning digging wiring is as follows: 1. The external machine has a control line, that is, there is a signal line, generally speaking, it is said that there are 4 wires and a signal line, and if the signal line has a socket, it can be plugged in directly; If there are 4 wires, first look at the color, and the general mark on the binding post, as long as it corresponds.

If there is no color, according to the regulations, the red live wire, the black zero line, and the yellow-green ground. Waichun mobile phone has two sets of 220V power supply, which controls the fan and compressor respectively. 2. If the external unit does not have a control line, this situation is relatively rare, and it is generally the previous unit.

How to wire Daikin air conditioner Daikin air conditioner wiring method: Daikin air conditioner is controlled by the external unit, so there is a signal line, generally including 4 wires plus a signal line, if the signal line has a socket, it can be plugged in directly, 4 wires are first compared to the color, and the binding post is generally marked with color, as long as it corresponds. If there is no color, according to the general regulations, the red is the live line, the black is the zero line only the spike, and the yellow-green is the grounding line.

There are two sets of 220-volt power supply in the external unit, which control the fan and compressor separately.

Summary. The three wires of Taijin air conditioner are power cable, communication cable and ground wire, which usually need to be wired according to the following steps:1

Plug the power cord of the Taijin air conditioner into the wall socket and make sure that the power cord is well connected and wired correctly. 2.Insert the communication cable into the communication port of the indoor unit of the air conditioner, and then insert the other end into the communication port of the outdoor unit of the air conditioner.

Note that the plug port must be correct and the plug must not be plugged in backwards or incorrectly. 3.Take out the ground wire of the Taijin air conditioner, connect one end to the ground wire post or ground wire junction box, and connect the other end to the ground wire port on the indoor unit or outdoor unit of the air conditioner to ensure good contact.

After the wiring is completed, you can turn on the air conditioner switch to test whether the air conditioner is working properly. If there are any problems, please find a professional maintenance personnel to deal with them in time.

The three wires of Taijin air conditioner are power cable, communication cable and ground wire, which usually need to be wired according to the following steps:1Plug the power cord of the Taijin air conditioner into the wall socket to make sure that the power cord is in good contact and the wiring is correct.

2.Insert the communication cable into the communication port of the indoor unit of the air conditioner, and then insert the other end into the communication port of the outdoor unit of the air conditioner. Note that the plug port must be correct and the plug must not be plugged in backwards or incorrectly.

3.Take out the ground wire of the Taijin air conditioner, connect one end to the ground wire post or the head of the ground wire junction box, and connect the other end to the ground wire port on the indoor unit or outdoor unit of the air conditioner to ensure good contact. After the wiring is completed, you can turn on the air conditioner switch to test whether the air conditioner is working properly.

If there are any problems, please find a professional maintenance personnel to deal with them in time.

Can you add, I don't quite understand it.

Please note the following:1Be sure to disconnect the air conditioner from the power supply before wiring it to ensure safety.

2.During the wiring process, you should carefully check the instructions of Taijin Air Conditioner to understand the specific interface positions of power cables, communication cables and ground wires. 3.

The communication cable should not be confused with the power cable, let alone reversed, otherwise it may cause damage to the equipment or electrical failure. 4.The grounding wire is set up by the sail ruler in order to prevent electrical leakage, do not ignore the connection of the grounding wire, and ensure good grounding.

In a word, the three-wire wiring method of Taijin air conditioner should be operated according to the specific situation, if you are not sure how to operate, it is best to seek the help of a professional to wiring it.

Summary. When connected, the power line is connected to the common end C, the capacitor is connected to the starting end S, and the line that connects the capacitor and the power supply should be connected with the running end R.

When connected, the power cord is connected to the common end C, the capacitor is connected to the starting end S, and the line that connects the capacitor and the power supply should be connected with the running end R.

The three lines of red, black and blue are connected in order to 123.

The red, green and blue wires are connected to the plug, the plug is connected to the red wire, the blue is connected to the zero stool line, and the green wire is connected to the ground wire. The live wire is connected to the switch L, the switch L1 is connected to the socket L, the neutral wire is connected to the socket N, and the ground wire is connected to the socket and the socket is scattered

How to connect the inverter air conditioner outdoor unit 123 red, black and blue.

There is a 1234 serial number on the black terminal strip of the outdoor unit, and there is also a 1234 serial number on the line, which corresponds to the connection.

I didn't see the numbers on the Daikin inverter air conditioner.

The inner machine wires are red, black and blue, plus the grounding wire.

An E line for frequency air conditioning, connected to the shell, grounded! An N line, 1 L line is excited, and a frequency conversion has an E line, connected to the shell, and connected to the trace! A feast of reeds N-line, 1 L-line, and a data line! Generally, there is a mark, color to color.

How to get a kiss with the three wires of Daikin air conditioner, hello, the three wires of the air conditioner plug are the ground wire, the neutral wire and the live wire. 1.The color yellow and green is the ground wire, remove the appropriate length of the insulating skin, and connect the metal wire to the ground terminal marked as "E"; 2.

Blue beating noise or light blue is the neutral wire, remove the insulating skin, connect quickly on the zero wire terminal with the socket identification is "N", yellow, green or red is the live wire, remove the insulating skin, and connect it to the live wire terminal with the identification "L". The connection of the three wires should be firm, and the metal wires should not be left outside the terminals. Then fix the air conditioning cord and insulating skin in the socket.