Can the stainless steel water tank be installed without a channel steel base?

Yes, as long as the concrete underneath is flat and can withstand the gravity of the tank.

The installation of stainless steel water tank is very simple, the stainless steel water tank purchased by the customer from the manufacturer or dealer, and its accessories, can let the customer know how to use it at a glance, the product accessories generally include the pressure plate, fixing screws (depending on the stainless steel water tank specifications are slightly different), water tank tripod, water tank cover, automatic float (optional, depending on customer requirements), basically including the above parts.

Now we can install the stainless steel water tank, if it is used on the flat ground, it is very convenient, you can save the steps of lifting the stainless steel water tank to the roof, if the water tank is to be used on the roof, the small water tank can be easily done, prepare a few large thick ropes, fix the water tank, and hang the roof along the smooth wall, if the large stainless steel water tank, you have to ask a special crane to assist in going upstairs.

Next, we fix the water tank in the place to be placed, according to the size of the water tank and the convenience of use to choose a firm place to place, and finally use the pressure plate to fix the stainless steel water tank and the water tank shelf, connect the water inlet, water outlet, you can use, the installation time is only one hour, compared with the traditional cement water tank, I believe your choice is definitely Jianwei stainless steel water tank.

Stainless steel water tank is divided into several kinds, if it is a round water tank, it generally does not use a channel steel base, even if it is a base is made of stainless steel, if it is a square stainless steel water tank, it depends on the situation of the site, if there is a cement foundation on the site, and there is a gap between the cement foundation column and the column, it is necessary to use the channel steel base. For details, you can contact Sanjiang Water Tank Factory at 0757-22168653, and we will answer for you in detail.

The Leabon water tank normally has a channel steel foundation.

Yes, you can ask the company for details--- Jin 1 Cheng 2 Ming 3

It depends on the situation in which it is used.

Almost everyone has a sink in their home, and many people use stainless steel sinks. What problems do we need to pay attention to when installing a stainless steel sink? Next, Tuba Rabbit will introduce these little knowledge to you, hoping to help everyone.

Attention should be paid to these problems when installing stainless steel sinks.

1. Production process.

First of all, we must look at the production process, the existing process is divided into welding and one-time forming, welding quality is the most critical factor affecting the process of sink life, must be tight, no welding; It's more advanced and popular, but it's hard to make. The thickness is the best. It can achieve the perfect combination of robustness and weak elasticity.

It can be used as standard at the time of purchase.

These problems should be paid attention to when installing stainless steel sinks.

2. Surface flatness.

Secondly, look at the surface flatness, keep the line of sight consistent with the plane of the sink, the edge of the sink should not be convex, not warped, and the error is less than millimeters;

These problems should be paid attention to when installing stainless steel sinks.

3. Accessories. and accessories, PP material or PVC hard water pipe has high sealing, which can prevent leakage; It is necessary to locate the water pipe, squeeze and seal the draft and control the table to remove water, which can quickly store water; The overflow device can ensure the safety of the kitchen; At the same time there must be sound attenuation, sound attenuating pads or sound absorbing coating is a good method;

Install a stainless steel sink and pay attention to these problems.

4. Sink. Compared with European and American families, at the same time, we are accustomed to using thick and large tableware, so the depth of the water tank also needs to be considered, 200-230mm, which is more suitable.

Attention should be paid to these problems when installing stainless steel sinks.

Do you have any concerns about these minor issues? These little things are not very obvious, but they can actually affect our daily lives. Is there anything else you need to know?

Welcome to Tuba Rabbit, we will provide you with more professional and comprehensive knowledge to help you better understand home improvement knowledge.

You can get it for free

Although the decoration materials of stainless steel sinks are not very eye-catching, stainless steel sinks play a large role in the kitchen. If the stainless steel sink is not installed properly, it will bring a lot of trouble and affect home life. The following decoration network will introduce the installation method of stainless steel sink.

1. Preparation before installing the stainless steel sink.

The installation of stainless steel sinks is generally after the installation of the cabinet countertop. That is, the installation of the sink is carried out a few days before the renovation is almost completed, mainly to avoid some damage after installation.

First of all, open the package, take out the sink and drainage elements, and check whether the accessories are correct and complete.

Remove the sink and follow the perforation template included in the box to make the countertop perforated. Check whether the silencer block is degummed, and if so, please reattach it.

Check whether there are cracks in all parts of the faucet, and whether the sealing rings at both ends of the connecting pipe are missing, misaligned, damaged, etc., so as to avoid water leakage after installation.

2. Stainless steel sink installation.

The sink drain must be left in the sink cabinet, and the angle valve must be installed before installing the sink. In order to avoid damaging the outer surface of the faucet during the installation of the faucet, the faucet cover or the faucet plastic bag should be put on the faucet for the installation of the faucet.

When connecting the hot and cold water pipes, facing the faucet, the left end is connected with the hot water pipe, and the right end is connected with the cold water pipe.

When installing bellows and braided pipes, we must pay attention to the size of the tightening force, too large is easy to damage the thread, too small may leak because of the seal.

After the installation is completed, the water commissioning of the stainless steel sink is done.

Reminder: Regarding the opening size of stainless steel sinks, the opening size of stainless steel sinks is generally minus the length and width of the outer diameter of the sink, and the angle R angle of the stainless steel sink opening is very important. Finally, if it is a double tank installed, it is recommended that you use the two sinks alternately, so as to ensure that the sink is not blocked and does not leak.

The above is the installation knowledge of stainless steel sink, I hope it can help you.

Before installing the sink, you need to measure the size, then install the faucet first, then install the sink, and then apply glass glue; When installing, be sure to pay attention to the strict measurement size, but also according to the depth of the sink to measure, be sure to tighten all the screws, to check whether there is water leakage.

It is necessary to reserve the installation distance first, and then install the stainless steel sink on it to fix it and connect the pipes. It is necessary to pay attention to waterproof, moisture-proof, but also to the problem of sewerage, but also to the connection problem, and pay attention to the problem of sealing.

Be sure to follow the steps to install, install the angle valve in advance, and then pay attention to connecting the hot water pipe and the cold water pipe, pay attention to the position of the sink in advance, and also consider the size.

Summary. The stainless steel water tank is equipped with manholes, water inlets, water outlets, sewage outlets, exhaust outlets, overflow ports, and sometimes increase or decrease water outlets according to the function of the customer's water tank. The sewage outlet is to discharge the dirt in the water tank, which can be directly connected to the sewage valve to discharge sewage on the spot, and can be installed on site according to the actual situation.

The overflow port is used for overflow when the tank exhaust and the float valve fails, which can be connected to the sewage or let it drain on the spot, but it must not be equipped with a valve. The float valve should be checked frequently and repaired in time.

Generally not a pro.

No soldering. Then make a galvanized channel steel foundation on the cement concrete, the general spacing is one meter, and then the water tank is installed on the channel steel foundation.

Can it be placed on it?

What I mean is that the stainless steel water tank can not be placed on galvanized channel steel.

OK. The stainless steel water tank is equipped with manholes, water inlets, water outlets, sewage outlets, hall exhaust outlets, and overflow ports, and sometimes the water outlets are increased or decreased according to the function of the customer's water tank. The sewage outlet is to discharge the dirt in the water tank, which can be directly connected to the sewage valve and discharged on the spot, and can be installed on site according to the actual situation.

The overflow port is used for overflow when the tank exhaust and the float valve fails, which can be connected to the sewage discharge, and can also be used to drain the water on the spot, but it must not be equipped with a valve. The float valve should be checked frequently and repaired in time.

The 2 materials are different, one is galvanized channel steel, and the other is stainless steel.

Knowing the pro. They will react when they come into contact.

No, dear. It's just that after a long time, the water tank has water and it is not good.

What are the implications.

If it lasts for a long time, it will have an effect on the galvanizing.

If the quality is not good, I am afraid that it will rust.

Any combination of stainless steel water tank modeling should meet the requirements of users, the volume can meet all design requirements, there are no special requirements for the installation site, and thermal insulation services can be provided. Beautiful appearance Smooth lines, perfect design, the whole box is simply a work of art, it is particularly important when choosing stainless steel material, what is the material of stainless steel water tank: a series of carbides can be formed inside the stainless steel.

The higher the carbon content in the steel, the more chromium carbide is formed, the chromium content in the solid solution is relatively reduced, and the corrosion resistance of the steel will be reduced. Sulfur is a harmful impurity, sulfur and nickel form Ni3S2 compound, Ni3S2 and nickel at 625 to form a low melting point eutectic, distributed on the intergrain boundary, when the heat deflection temperature exceeds the eutectic melting point, that is, along the intergrain boundary cracking, the so-called"Hot crispy"Phenomenon. Ni3S2 formed by nickel and sulfur at room temperature can cause cold embrittlement.

Food-grade SUS stainless steel plate, completely block off sunlight, do not breed algae, and keep the water clean at all times. Never leak The unique structural design is fully welded on-site for superior strength. Unlike the bolt structure, the sealing strip is omitted, so there is no water leakage and poor sealing.

The effect on stainless steel can only be fully manifested when mated with chromium. Nickel is the alloying element that forms austenite, when nickel is used with chromium, the metallographic structure can be changed from single-phase ferrite to austenite and ferrite duplex structure, after heat treatment, the strength can be improved, so that it has stronger rust resistance and good deformation properties. The effect of impurities on the performance When the carbon content is between the middle, after annealing, the carbon will precipitate in the graphite state on the inter-lattice boundary, which destroys the binding force between the grains, strongly reduces the strength and plasticity of nickel, and makes the processing deformation difficult.

Chromium plays a major role in the corrosion resistance of stainless steel, and chromium is the main element that determines the corrosion resistance of stainless steel, because the presence of chromium in the steel can make the stainless steel passivate in the oxidizing medium, that is, a thin film is formed on the surface, and chromium is enriched in this film. The higher the chromium content in the steel, the greater the corrosion resistance.

In addition, chromium can play a good role in strengthening the mechanical properties and process properties of steel304,201 and 444 materials, identified by magnets, 444 strong magnetism, 304, 201 show non-magnetic or weak magnetism; The distinction between 304 and 201, both belong to austenitic stainless steel, the difference makes how much nickel the two contain, the easiest way is to use a drop of potion (sold near the stainless steel market, or to borrow a set of scrap stainless steel to use it), such as the surface droplets instantly turn dark brown-red is 201 plate, and the droplets do not change color within 3-5 minutes is 304.

Precautions for the installation of cylindrical stainless steel water tank: When installing the bracket, it must be fixed on the bearing beam and plate of the water tank with 10mm expansion screws. Otherwise, when there is no water in the tank, strong winds will blow your tank up from the roof, and the consequences will be serious.

The upper one is the water inlet, and the other one should be equipped with 1 open 2 pipes, each with one-way exhaust and one-way inlet, and both nozzles should be downward.

The next one is the outlet, and the other is the drain.

Isn't there an installation instruction for this tank you bought??

And there is nothing else for a tank and a stand???

The one on the first floor said was very detailed, but do you have everything in it?

Whether it is a high-rise or a basement, as long as the water tank is placed, the channel steel base can be dispensed with if the foundation conditions permit.

Usually there are two main reasons why our water tank uses channel steel base: 1. In order to prevent water accumulation at the bottom of the water tank or to make the water tank foundation beam for reasons such as water tank elevation, the foundation beam is generally directly made into a spacing of less than or equal to one meter due to cost considerations. In this case, it is necessary to have a channel steel base to reinforce.

2. In order to place the water tank smoothly and facilitate the valve installation point when the side of the sewage outlet is opened.

Yes, you don't need to install it. It is acceptable not to use a channel steel base on a high floor.