What is the approximate price of a 20 ton stainless steel water tank?

You can't explain the purpose and size of the tank, so you can't tell you exactly! However, according to the commercial (volume of more than 10 tons) combined or prefabricated stainless steel water tank: now many people use how much a ton (volume ratio) to calculate**!

Otherwise, this is unscientific, unreasonable, and even more unfair! If it is calculated by tonnage (volume), the price changes with the size of the volume, which seems fair, simple, convenient and reasonable! So the problem is, we know that when stainless steel plates are purchased, the material cost is calculated by weight or square meters!

And the more square the tank, the more economical it is, and vice versa! Let me give you an example: I want to purchase a combined stainless steel water tank with a nominal (theoretical) volume of 99 cubic meters, and the specifications are unknown!

Specification 1: 11 meters * 3 meters * 3 meters = 99 tons of 150 square meters. Specifications: m * m * 3 m high = 99 tons total 135 square meters.

According to the above two specifications, it can be seen that their material consumption is 10% different, that is to say, the cost difference is 10% when the height and material thickness of the water tank are the same. If you change to a different height and material thickness, the cost difference will be even greater. (Of course, there are also people who say.)

Although the height and thickness of the tank are the same, the cost is different when the length and width specifications are different. Then I am very responsible to tell you: it is indeed different, but the cost difference will not exceed at most!

Think about what the concept of more than 10% is) so I think: the first calculation method of stainless steel water tank should be calculated by the square area of six sides is the most fair, reasonable, accurate and scientific calculation method rather than tonnage (volume).

The stainless steel water tank needs to be calculated according to the specific specifications of your water tank, such as the same 20-ton water tank, the size of 522 and the size of the ** are completely different, and the water tank ** is also related to the installation location of the water tank.

The stainless steel water tank should be determined according to the size, material, thickness of the tank plate, installation location and other factors, so the water tank needs more specific information to determine.

The ** of 20 tons of stainless steel water tank requires you to provide specific length, width and height, and we set different plate thicknesses for you according to the specifications to calculate**. --Tengjia.

Stainless steel fire water tank.

The main factor that determines the stainless steel water tank ** is SUS304-2B stainless steel material, the main component of the stainless steel water tank, that is, the stainless steel water tank plate and ribs.

First of all, it is purchased from raw materials, and then the semi-finished products required for stainless steel water tanks are produced through processing shearing and stamping processes.

Do not seek the market with low prices, but survive by quality.

The semi-finished products are transported to the installation site and welded by argon arc welding, which is the transportation and installation costs.

<>This stainless steel water tank is made by Zhuxing, how do you feel?

It needs to be according to the specific length, width and height, and there is the installation address, 20 tons is too general, and it needs to be specific.

24 cubic meter stainless steel water tank weight pro! Hello, glad to answer for you. A cubic meter of stainless steel water tank weighs tons.

1 cubic **: 1616 Please note: the stainless steel water tank is carried out according to its specifications and models, its tonnage and height are different, and the thickness of the matching plate is also different.

By no means a n-cube tank, ** is n 1. The weight of a cubic stainless steel is tons. Solution:

It is known that the density of stainless steel = 7850 kg cubic meters, then according to the formula mass = volume x density, it can be obtained that the mass of stainless steel = volume of stainless steel x density of stainless steel = 1 cubic meter x 7850 kg cubic meter = 7850 kg = tons, that is, the weight of one cubic stainless steel is tons. Hope mine can help you! Do you have any other questions?

Summary. Dear, hello, I have inquired for you how many cubes of stainless steel water tank are counted? The formula is:

Length * width * height square stainless steel water tank effective volume calculation formula: The formula is: length * width * height For example, the calculated volume of a 5 * 3 * 2m water tank is 5 * 3 * 2 = 30m3, which is just to calculate the volume, so how can we get the effective volume?

Here you need to know the effective water level height of the square tank. When we design stainless steel water tanks, the water tanks have water inlets and outlets, as well as drains and overflow ports. We design a low water level according to the size of the outlet and a high water level according to the overflow location.

In fact, the effective water level of the 2-meter-high tank is the water level from the outlet to the overflow. Taking the 5*3*2m water tank as an example, we set the water outlet above the bottom of the water tank, and the bottom of the overflow port is designed with overflow water level or high water level, which is far from the top of the tank. It can be concluded that the effective water level of this tank is, not the height of the tank.

Therefore, the effective volume of the water tank of 5*3*2m becomes 5*3*, and the effective volume of the water tank is calculated according to Equation 3. The conclusion is as follows: the adjusted volume should be greater than the effective volume, 5*3*2m, the adjusted volume of the stainless steel water tank is 30m3;The effective volume of the 5*3*2m water tank is 3.

Length, width and height) on one side of the two top plates and bottom plates.

How to calculate how many cubes and how many squares.

Dear, hello, I have inquired for you how many cubes of stainless steel water tank are counted? The formula is: length * width * height square stainless steel water tank effective volume calculation formula:

The formula is: length * width * height For example, the calculated volume of a 5 * 3 * 2m water tank is 5 * 3 * 2 = 30m3, which is just to calculate the volume, so how can you get the effective volume? Here you need to know the effective water level height of the square tank.

When we design stainless steel water tanks, the water tanks have water inlets and outlets, as well as drains and overflow ports. We design a low water level according to the size of the outlet and a high water level according to the overflow location. In fact, the effective water level of the 2-meter-high tank is the water level from the outlet to the overflow.

Taking the 5*3*2m water tank as an example, we set the water outlet above the bottom of the water tank, and the bottom of the overflow port is designed with overflow water level or high water level, which is far from the top of the tank. It can be concluded that the effective water level of this tank is, not the height of the tank. Therefore, the effective volume of the water tank of 5*3*2m becomes 5*3*, and the effective volume of the water tank is calculated according to Equation 3.

The conclusion is as follows: the adjusted volume should be greater than the effective volume, 5*3*2m, the adjusted volume of the stainless steel water tank is 30m3;The effective volume of the 5*3*2m water tank is 3.

How do you calculate square meters?

Length, width and height) Top plate Bottom plate side one side two plus one is all the surface area square meters.

You count the process, I want the process. Thank you.

Ton.

The weight of one cubic stainless steel is tons, and using 18 times tons is equal to tons, so 18 cubic stainless steel tanks are tons in weight. Tan Cong.

Stainless steel water tank is a new generation of water tank products after the FRP water tank, and its accompanying leakage products are made of SUS304 stainless steel plate Seiko molding, which is beautiful, economical and practical, and the main body is not bad for a long time.

Dear, we are happy to serve you, the answer is as follows: 5 tons stainless steel water tank size A 5 ton stainless steel water tank diameter is, vertical height 2 meters, cover diameter; The total height stainless steel water tank is generally made of stainless steel plate made of SUS304, which has relatively stable physical and chemical properties, and has no pollution to the water source, so as to ensure the cleanliness and hygiene of water quality. Because it is a stainless steel water tank stamping form, the strength is relatively high, the weight is relatively light, the appearance is neat and elegant. Lingsheng stainless steel has light weight and high strength, using stainless steel stamping plate, with good forming, low internal stress, high precision and no wear on the surface.

The yield strength of stainless steel is equivalent to that of carbon steel and 6 times that of FRP, and it shows good characteristics for shock resistance and impact resistance.

First of all, we have to distinguish the first component of the 304 stainless steel water tank

1. Specifications of the water tank (length, width and height);

2. Water tank plates and accessories;

3. a bottom channel steel foundation;

4. Installation fee (installation location - roof or basement?) )；

5. Freight (where is the destination?) ）；

6. Taxes; Only after figuring out the above components can we make the most detailed budget. We will use examples to explain the specific details of **.

Why do we need Party A to provide the length, width and height dimensions of the 304 stainless steel water tank instead of just the tonnage?

First of all, let's talk about the most important one: the same 24 cubic 304 stainless steel water tank, A specification: 4 3 2, B specification:

6×2×2。Because the height is the same and the number of cubes is the same, the strength and thickness of the plates used are the same. However, the surface area of specification A is 52 square meters, and the surface area of specification B is 56 square meters, so it is not the same.

Let's take a look at a few others:

1. Some 304 stainless steel water tanks do not need to make channel steel foundations, so when ordering, we will budget to remove the channel steel base from the total **.

2. Installation in the basement and the roof is also different, and labor will definitely be wasted on the roof, and the corresponding installation fee should be higher.

3. The transportation fee is easier for everyone to understand, and the transportation fee is calculated according to the distance.

The stainless steel water tank is not calculated according to the cube, if the customer is calculated according to the cube is not cost-effective, the stainless steel water tank should be calculated according to the specific length, width and height of the water tank, the specific installation location of the material, whether it is to be insulated and other data calculation, we should send the specific data to the manufacturer when calculating the water tank.

About 30m is about 1600 yuan, the smaller the unit price, the more expensive, the bigger the cheaper, in addition, it is also related to the thickness of the material, the size of the shape, whether there is thermal insulation.

The stainless steel water tank outlet needs to be installed with an ultraviolet sterilizer for sterilization and disinfection.

This should be based on your tank specifications and installation location, and Wuyi Yi will make a budget for you.

The stainless steel water tank is calculated according to the specific length and height, with different thicknesses, different materials, different installation locations, and different construction conditions.

The stainless steel water tank is not calculated according to the cube, the development of the times at will, the stainless steel water tank is becoming more and more refined, first of all, we must know that the components of the stainless steel water tank are: the length, width and height of the stainless steel water tank, installation, freight, etc., different specifications of the stainless steel water tank will have different configurations, so the stainless steel water tank is not the same.

Nowadays, whether it is commercial, industrial, or household, the use of stainless steel water tanks is becoming more and more extensive, bringing a lot of convenience to our lives. So, how much is a stainless steel tank that can store 1 ton of water**? Today, I brought you a stainless steel water tank ** table, let's take a look!

1. Stainless steel water tank ** table.

1. Rixing 200kg-5 tons 304 stainless steel water tank water tower solar air energy fire kitchen storage bucket water tank 5 tons, market**: 6600 yuan;

2. Rixing 304 stainless steel pressure tank household automatic towerless water supply device water tower water tank stainless steel water tower water tank 3 tons, market**: 13,800 yuan;

3. Zhuangyuanyu (zhuangyuanyu) pressure tank household automatic towerless water supply device 304 food-grade stainless steel water tower water tank 50 wide 155 high 300 liters thick, market **: 1240 yuan;

4. Zhuangyuanyu 304 food-grade stainless steel water tank, square water tower formwork storage tank, thermal insulation water tank 500 liters, market**: 3220 yuan; _

5. Woaoqi stainless steel water Zen loss tank, water tower water storage tank, water storage tank, solar roof, kitchen, round wine tank, large capacity, ton horizontal Hezhishen cold water tank, market**: 4399 yuan;

6. Ximu pressure tank household automatic towerless water supply device stainless steel water tower water tank tap water pressurized solar water supply pump water storage tank, thickened 500L diameter 60cm * high, market**: 999 yuan; _

7. Lanmo 304 stainless steel water tank water tower household vertical thickened solar roof kitchen water storage tank wine tank water storage bucket, thickened ton (88*160cm) with tripod, market**: 1737 yuan;

8. Lanmo stainless steel pressure tank without tower water supply, household automatic water storage, tap water booster pump, water tank, water tower (thickened), 700L diameter, 70cm, height 160cm, market ** 1378 yuan;

9. Boelter pressure tank household automatic towerless water supply, stainless steel water tank, water reservoir, tap water pressurized solar water supply pump, water storage tank (thickened) diameter 50 * height 155cm300 liters, market **: 549 yuan;

10. Elegant pressure tank household automatic towerless water supply, stainless steel water tower water tank, water reservoir, tap water pressurized solar water supply pump, water storage tank (thickened) diameter 60 * height 155cm500 liters, market**: 999 yuan;

11. Su Zhihui household automatic towerless water supply, stainless steel pressure tank water pump, water tower tap water storage water pressurization, ordinary 300 liters, diameter 50cm, height 155cm, market**: 987 yuan;