How to hide Converse high top laces, how long are Converse high top laces

There are several ways to hide the Converse high-top laces:1. Cross knots1. One end is knotted on the inner side, and the other end is perforated in order;

2. Jump a hole and penetrate it;

3. Tie it in the same way;

4. After repeating, the remaining shoelaces are tucked into the inner side and knotted;

5. Purple shoelaces are also perforated in the same way and in order;

6. Wear it from below and then out from above;

7. Choose harmonious laces according to the color of the shoes;

8. Excess shoelaces are knotted on the inside.

2. Trapezoidal knots1. After adjusting the length of both ends of the laces, pull out the laces from the inside to the outside;

2. Pull out the shoelaces and thread them into the second hole from the outside to the inside;

3. The left shoelace is worn out from under the shoelace between the two holes on the right, and the right side is the same;

4. Repeated operation;

5. Pay attention to the direction of the cross laces at both ends;

6. Excess shoelaces are stuffed into the shoes and knotted;

7. The trapezoidal knot after completion.

3. Twist knots1. Two shoelaces are knotted inside and worn out;

2. Wear out of the second hole after the two shoelaces are crossed;

3. At this time, in order to center the intersection as much as possible, tighten the laces;

4. The appearance of twist is produced in the process of centering the intersection;

5. Enlarged twist knots**;

6. Leave the last hole;

7. Finally, use x to deal with it, so that it is more convenient to put on and take off;

8. The remaining shoelaces are knotted together in the shoes.

Fourth, double direct knots1. After leaving a length of yellow laces, they are worn out of the left face and entered from the right face;

2. Wear shoelaces in the direction of the dotted line;

3. Adjust the shoelaces so that they remain in a straight shape and do not roll them up;

4. Tuck the excess part into the shoe;

5. Also leave a section of the white shoelace on the inside, and knot it with the yellow shoelace inside;

6. Wear shoelaces in the direction of the dotted line;

7. Adjust the white shoelaces so that they are on top of the yellow shoelaces;

8. The excess part is knotted with the yellow laces on the inside of the shoe.

5. Internal X knot1. After something is consistent at both ends, each end is pierced through the second hole;

2. Penetrate into (2) hole from (1) hole, and then penetrate out from (3) hole;

5. Knotting on the inside;

6. The finished style.

I usually put it in the tongue of my shoes.

The Converse standard high-top laces are 170cm, the low-top laces are 120cm, and the Converse women's seven-hole high-top laces are about 54 inches. Shoelaces are used to tie the inner and outer upper surfaces of shoes, decorate the upper surface, adjust the tightness of shoes, and ensure the safety of ankles.

There are many ways to tie the shoelace, such as: cross knot, trapezoidal knot, twist knot, double X knot, double straight knot, oblique knot, inner X knot, etc.

Converse shoes care precautions:

1. When drying the cleaned canvas shoes, you should avoid direct sunlight, and it is best to wrap a layer of toilet paper on the shoes, and when the shoes are dry, you will find that the toilet paper will turn yellow, but the shoes are very bright and clean.

2. Shoes should be cleaned regularly, do not use a brush when cleaning, that will damage the shoes, for a long time not sensitive to wear shoes is best packed in a bag to reduce oxidation.

3. The maintenance of canvas shoes needs to maintain a very cracked and pure attention to the weather, and do not wear it in the rainy weather every day without replacement, which will cause the rapid aging and yellowing of the shoes.

1. Start with the second hole and run through the laces from the outside to the inside; 2. Tie white shoelaces with the X knot method; 3. White X knot look; 4. The end is plugged into the inner side and knotted; 5. Thread the shoelace through the first hole, tie the X knot, and pass through the intersection of the white laces; 6. Knot the ends of the blue laces; 7. The remaining lines are relatively long, and you can make a ring; 8. Go around a few times and pass through the ring.

The length of the laces depends on the number of lace holes on the Converse shoe. Note that you can only use this tie if your lace holes are an even pair.

If you want to tie 2 pairs, use 63cm laces.

If you want to tie 4 pairs, use 80cm laces.

If you want to tie 6 pairs, use 96cm laces.

If you want to tie 8 pairs, use 112cm laces.

Criss-cross knots.

1. One end is knotted on the inner side, and the other end is perforated in order;

2. Jump a hole and penetrate it;

3. Tie it in the same way;

4. After repeating, the remaining shoelaces are tucked into the inner side and knotted;

5. Purple shoelaces are also perforated in the same way and in order;

6. Wear it from below and then out from above;

7. Choose harmonious laces according to the color of the shoes;

8. Excess shoelaces are knotted on the inside.

Thread the laces through the bottom two holes. Thread the laces through the bottom two holes. The laces should be tucked inside the shoe.

Viewed from the front, a straight bar is formed between the bottom two lace holes.

Leave the same length at both ends of the laces.

Usually the wearer who is looking for comfort and style will opt for the simple fastening method. It's very comfortable, and it looks cleaner without the bottom diagonal.

When it comes to shoelaces, everyone should know that some people ask Converse about the details of lace ties, and in addition, some friends want to ask Converse if there are low-top shoes, what is going on? In fact, the Converse shoelace tie is detailed, and then here we will bring you the 24 ways to tie the Converse shoelace, let's learn about it together.

24 ways of converse laces.

Tie the laces in a knot at both ends.

2.Press the middle position with your hand and make a loop with the irregular curl of the right shoelace.

3.Fold the left shoelace from above and hold it down with the thumb of the right spine.

4.Wrap around the top of the right lace loop and then through the left lace loop.

5.The original right side of the shoelace loop is placed on the left side, and the left side of the shoelace is wound into a circle and passed through the shoelace is tightened on the right side.

6.Trim the ends of the laces into a linked shape, and the bow is done.

Second, this is a method of using both sides of the front and back, and the front side of the bow tie is outward

1.Tie the laces horizontally, facing outward.

2.Fold the right side to the size of a petal.

3.The petals folded out on the left side are longer than those on the right.

4.Refer to **, cross left and right, and leave a hole in the center.

5.The long side is pierced through the hole.

6.Left and right are arranged into equal sizes.

7.It becomes big by ribbon.

1 Pull out the laces after they are secured inside.

2. The shoelaces are pressed into and out of the Z-shaped cherry blossom answer method repeated, forming a "one" state.

Mine was taught to me by my friend, first straighten out the front laces, then keep the top two holes, and then tie it around like that.

How to adjust the belt of the waist bag to make it longer.

Fold the one that grows back into the buckle.

The waist bag is a kind of bag fixed on the waist, the size of the waist bag is small, the shape of the waist bag changes with the functional demand for the waist bag in the original waist bag shape, the waist bag is often made of leather staring, synthetic fibers, printed denim surface, etc., and the color of the waist bag is mostly colorless and color collocation or color gray. It can be used in socks for travel or daily life.

Converse laces are a classic sneaker, but for some people with larger feet, wearing this shoe will make the foot more prominent, affecting the overall beauty. However, as long as you tie your Converse laces correctly, you can easily make your feet look more compact and delicate.

First, thread the laces through the eyelets on top of the shoe. Then, pass one end of the lace through the eye, and the other end through the next eye. Next, cross the laces at both ends and thread them through the next eyelet.

Repeat this step until the laces are threaded through all the eyelets.

Finally, tighten the ends of the shoelaces so that the shoe fits snugly against the shape of the foot. In this way, it is effective to make the feet appear more compact and delicate.

Also, if you want your feet to be more slender, you can tie your laces in a "V" shape. This is done by threading the laces through both eyelets, then passing the lace at one end through the next eye, the other end through the previous eye, and finally crossing the laces at both ends through the next eye. Tying the shoelaces in this way will make the foot line smoother and more slender.

In short, as long as you master the correct way to tie the laces, you can easily make the Converse laces appear small and long, making your outfit more perfect.