Financial Binding Machine Recommendation? How to use a financial binding machine?

Generally speaking, the automatic financial binding machine is carried out automatically by punching holes and riveting. At the same time, there is a difference whether manual assistance is required, and some models are operated with a handle to assist in punching or riveting, which is also an automatic binding machine (semi-automatic). In terms of positioning, the industry is basically about the same.

As far as the landlord said, I think Yinhua A3 or Yinhua A5 automatic financial binding machine (Yinhua series.

A good choice then. It eliminates the traditional binding machine handle operation and combines the touch operation experience; Manual positioning is also no longer used, but laser positioning is used instead, making the binding effect beautiful. At the same time, in terms of raw materials, office consumables are the most fully reflected in durability and storage life, which can reach more than 20 years.

Yinhua series binding machine warranty in one year.

Yinjia's binding machine is not bad, our unit is using this, with it is still full of hand, our unit bought this is 6500, there are also small cheap, you can check for yourself in the direct search for "Yinjia binding machine" on.

Silver Sail is good, but it is a little more expensive, and the one-piece kind is more than 10,000.

Nowadays, many times in life use binding machines, today we are going to introduce financial binding machines. The name is financial binding machine, which must be used in finance. The fact that the financial binding machine can be used in the financial department shows that its tightness is relatively strong.

A financial binding machine is not like a regular binding machine. The performance of the financial binding machine is very good, every large hole in it is very tight, and the financial binding machine must be connected to the power before it can start working. Then let's take a look at the steps of the financial binding machine!

<> financial rubber blind binder operation steps.

1.Turn on the power and be coarse.

Turn on the power supply, press the [Power Switch] button to the "i" position, and the red indicator of the power will light up.

2.Perforate. Check the position of the punching hole, press the [Down] button, release the button when the drill bit moves down to the beam on the required binding document and confirm whether the binding position is appropriate, press the [Reset] button to reset the drill bit.

3.Adjust the margins.

Set the size of the staple hole from the file boundary: The normal size of the distance between the hole and the file boundary is shown in Figure 5 on the right. First of all, clarify the distance to be set (the range is 3-20mm) open the workbench locking pin, move the workbench back and forth to the desired position, and lock the workbench with the workbench locking pin.

4.Drill and cut rivet pipes.

Press the [Start] button, the drill cutter rotates and automatically lowers the drilling, after the drilling is completed, the drill cutter automatically rises back to the original position, and the pipe cutting mechanism simultaneously cuts off a suitable length of hose and falls into the tube box groove.

5.Pressure riveting binding.

Take out the hose that has been cut in the pipe tank, and when the [Preheating] indicator lights up, pass the hose through the hole of the ticket and move it above the lower riveting head. Slowly press down the binding handle so that the hot rivet needle passes through the hose and confirm that it has entered the pinhole of the lower hot riveting head, and then press down the binding handle firmly for about 5-10 seconds, then release the binding handle and take out the binding file, and the binding work is completed.

6.Clean. The paper scraps generated after punching will fall into the paper scrap box under the machine, which needs to be cleaned in time every day.

We have all learned the operation steps of the financial binding machine, and the financial binding machine looks like a piece of equipment. But its function is intelligent, as long as there are documents that need to be sealed, they can be automatically operated on the financial binding machine. The financial binding machine does not need nails, it makes small holes like a dotting machine.

And the small holes are naturally sticky. The financial binding machine has a wide range of uses, and many large enterprises, companies, manufacturers, especially small printing enterprises, are using the financial binding machine to work. So we have to learn to use the financial binding machine correctly.

You can get it for free

Save time (two-thirds of the time);

complete binding (standardized, neat);

Binding safety (the binding is sturdy, not easy to grind, like a regular book);

No need to pull the gutter hard;

**Reasonable (about 100 yuan);

Do not lose its practical value at any time;

cost savings;

No bookbinding utensils can replace him;

A must-have appliance for all walks of life.

The difference between binders is quite big. The manual binding machine uses the handle to press down and punch holes, especially through manual piercing, which greatly reduces the work efficiency. The automatic binding machine is completed with one key on punching and cutting pipes, especially the bonsai automatic financial binding machine as a representative, which uses nylon tube heating and high temperature riveting, automatic matching of riveting pipes, and intelligent automatic integration.

As a fully automatic binding machine, the binding is naturally more manual and automatic, but it is not necessary in terms of demand, because it has a large binding volume and is expensive. Compared with the bonsai automatic financial binding machine**, there is a great advantage, and the manual binding effect is not good, which is very time-consuming and physically problematic.

The binding demand for general finance belongs to small and medium-sized, and the binding volume is not very large, but it is not very little. According to the needs and interests of the choice, the automatic financial binding machine is the most suitable for binding, especially the bonsai automatic financial binding machine is recommended to everyone.

Half telling the truth is often a big lie.

The whole operation process can be divided into: punching, automatic pipe cutting of the binding machine, pipe threading, riveting and other steps.

One-button automatic binding: drilling, tube feeding, tube cutting, tube loading, positioning, and riveting processes are all automated. Environmental protection: The paper scrap design is adopted, and the paper scrap generated by punching is directly discharged into the chip box through the hollow drill cutter, which solves the traditional binding process.

The harm of paper scraps and dust to the human body is generated.

Time-saving and labor-saving: The whole binding process is manually operated by the motor, which saves time and effort.

Stable binding: Nylon tube binding makes the binding more beautiful, will not produce a single page falling off, and the binding document can be stored for more than 20 years. According to the degree of automation of the operation process of the financial binding machine, it can be divided into:

Manual binding machine, semi-automatic binding machine, electric riveting (automatic) binding machine, automatic binding machine.

Semi-automatic binding machine: the working mode of handle pressing down and punching, automatic pipe cutting, manual perforation, and manual riveting is adopted. : One key to complete the punching, automatic pipe cutting, manual perforation, manual riveting working mode.

Electric binding machine: the working mode of motor punching, automatic pipe cutting, manual perforation, and manual riveting is adopted.

Automatic binding machine: the working mode of one-key completion of punching and pipe cutting, manual piercing, and riveting one-key completion.

Automatic binding machine: punching, pipe cutting, pipe threading, riveting and other steps can be completed with one click. First of all, the financial binding machine can be divided into the following types according to the degree of automation of the machine:

Rope binding machine with manual operation of threading and tying, manual hose binding machine with manual operation, semi-automatic financial binding machine (HJ-50C) with electric perforation and manual riveting, automatic financial binding machine (HJ-50B) with automatic punching and automatic riveting with key buttons, automatic financial binding machine (HJ-50A, ZD-50A) with automatic one-button completion of binding machine.

Customers can choose different types of financial binding machine products according to their own binding size and budget, the higher the degree of automation, the easier and more trouble-free the financial binding machine product binding operation, and the operation is more stable when dealing with large binding volume operations. The relative ** is also higher. The stability of the financial binding machine is mainly to examine the workmanship quality and after-sales service of the product, which is a strong guarantee for the service life of the machine and any failure of the machine in the process of use.

There are many imitation products with the same appearance in the market, and the quality of the assembly parts of the products is uneven, which leads to the same appearance of the products is far from the same, do not choose inferior and unguaranteed products because of the low price, the majority of friends must choose large manufacturers with national inspection and good after-sales service products.

Financial binding machine is a kind of financial binding equipment widely used in enterprises and institutions of financial vouchers, bills and other binding equipment, financial binding machine after years of technical upgrading and structural optimization, the development of automatic financial binding machine, automatic financial binding machine, high intelligence financial binding machine and other types. The binding of financial bills has been automated and intelligent, which has greatly reduced the workload of financial personnel.

Maintenance method of financial binding machine:

1. The financial binding machine needs to be used in a normal office environment, placed on a flat and solid desktop, and kept clean and tidy to avoid being attacked by moisture and sunlight.

2. The model that needs the power supply should be connected to the power supply correctly and safely, and unplug the power plug immediately after use. Do not use a voucher binder in special cases such as lightning. Note: If the financial binding machine is damaged due to the power supply, it will not be covered by a free warranty.

3. The financial binding machine should not exceed the maximum number of perforated pages allowed by the model every time the financial binding machine is punched, and special attention should be paid to: no more than 2 pieces of transparent sheet at a time, and the covering paper should not exceed 4 pieces at a time.

4. For the financial binding machine with adjustable perforated edges, it should be noted that the edge distance matches the diameter of the rubber ring, otherwise the following situations will affect the binding effect.

1) Small rubber ring and large edge distance: the bound document is not easy to turn and may be wrinkled.

2) Large rubber ring and small edge distance: When turning the file, the page gap is too large, which affects the overall effect, and if it is turned for a long time, it is easy to clear the loss and the page drop phenomenon.

5. When using the financial binding machine, pay attention to the high temperature in the financial binding machine and beware of scalding. Special attention is paid to children.

6. When using the financial binding machine to order, the documents must be sorted out before they can be put into the envelope, otherwise the bound documents will be uneven; After the envelope is heated, it is necessary to fix the hot glue slightly by hand, so that the bound text is neat and tangible; Just after heating, do not turn the text immediately, it is easy to cause loose pages, and the rubber strip can only be turned after cooling and solidifying.

7. Please choose the best binding materials (rubber rings, hot melt envelopes, etc.) for each financial binding machine to ensure the quality of binding and avoid damage to the machine.