-
Anonymous users2024-02-10OK. The sewer standard is the nominal outer diameter dn, don't correspond to that point. Generally speaking, the few minutes and inches correspond to the welded steel pipe.
Because the welded steel pipe is processed, the thread processed on the pipe is an inch thread.
There is a saying that there are a few points and a few inches, and the PVC-U sewer pipe is used for bonding, and there is no such thing as a few points and inches.
Pvc-U pipes are assumed to be piped with cast iron pipes for drainage.
Connected, corresponding to the standard of drain pipes is DN75. In the technical exchange, it is not safe to call the PVC-U pipe with a nominal outer diameter of DN90mm 75, and it is a mistake to put it more directly. The drain pipe connected to the toilet bowl should be DN110mm, and it is not appropriate to use DN70mm and DN90mm.
-
Anonymous users2024-02-09No, the standard size is 110cm in diameter, and most of the toilets are now of this size, and the kitchen drain pipe can be 75cm.
-
Anonymous users2024-02-08Moving the unsuitable toilet outlet with a 75mm pipe will not affect future use, but the outlet must be installed in place when installing the toilet, otherwise water will seep out.
-
Anonymous users2024-02-07It can be used, when you install the toilet, use a toilet flange ring, and after installation, the silicone should be ready.
-
Anonymous users2024-02-06What is the diameter of the water outlet of the toilet.
-
Anonymous users2024-02-05For 75mm sewer pipes, how to install toilets.
Hello! For 75 mm sewer pipe, toilet installation method 1, if the diameter of the toilet sewer pipe is 75 mm, then this diameter is relatively small, the toilet sewage pipe generally needs to reach 110 mm or 120 mm, in order to meet the needs of the sewage capacity, so the size of 75 is not recommended. 2. There are many toilet designs, and the distance from the center of the sewage diameter to the wall must also be designed very reasonably, otherwise it will easily lead to the inability to install the sewer pipe.
3. If you have to use a 75 mm pipe, then it is best to move the toilet bowl, generally speaking, move a 10 male pants base or so, and also need to take into account the height of the toilet when leaking, you can choose a wall-type toilet, so that the use of 75 pipes will not affect the use of the toilet.
-
Anonymous users2024-02-04Dig a 100mm settling hole at the outlet of the drain pipe and shorten the drain as much as possible. Pay attention to lap seals.
Specifically: 1. Make toilet drainage holes and drainage hole positioning fixtures as professional installations;
2. Put one end of the clamp into the hole above the drain pipe, and then place the drain hole of the toilet seat at the upper end of the positioning fixture;
3. After adjusting the correct position of the toilet, sit on the ground around the toilet and make a mark;
4. Remove the clamp, put the corresponding end of the toilet lid flange into the hole above the drain pipe, and then place the toilet lid on the toilet lid according to the No. 3 positioning line. The toilet seat flange is installed accurately.
-
Anonymous users2024-02-0375 The pipe will be blocked in the future.
The hardware store just buys an excuse to convert the piece.
-
Anonymous users2024-02-02Just buy a toilet locator.
-
Anonymous users2024-02-01Summary. For 75mm sewer pipes, how to install toilets.
75 of buried pipes.
Can the buried pipe 75 be blocked?
-
Anonymous users2024-01-31Summary. Can you use 75 pipes for the sewer pipe of the toilet.
Hello, this is the answer I found for you and I hope it helps.
Than the heart] [than the heart].
If you are satisfied, please give it a thumbs up
Generally speaking, the length of the toilet bowl is 30 cm or 40 cm. If the bathroom has not been paved with wall tiles at the time of measurement, the thickness of the tiles should be reduced by the results of the measurement team, and the reserved thickness of the wall tiles is about 2 cm. >>>More
There are four types of toilets on the market according to the sewage discharge method: flush down type, siphon flush down type, siphon jet type and siphon vortex type. >>>More
1. Buy a pipe dredger, which will be sold in hardware stores on the market, ** in more than ten or twenty yuan, it is a steel ring, the front end is dense, the back end is sparse, and it has a spiral hook. Also buy rubber gloves, because there are a lot of bacteria in the sewer to avoid getting infected. The special drainage agent for pipelines also needs to be purchased, and the double effect can cure the root cause. >>>More
It's okay, it's not a natural flow. However, the water pipe should not be too large, because the water flow will have abnormal noise, which will affect the sleep is not good. Remember to make a solid bed to sleep soundly.
1. There are two possibilities: a. The thermostat is damaged and cannot be opened; b. There is air resistance in the cooling system, and the coolant circulation is not smooth. >>>More