I want to mention what should I pay attention to when picking up the Junjie 1 8 Comfort model

Look at the fur. Check the machine water tank or something for defects. I'm taking a taxi and listening to the sounds. It's best to find someone who knows how to drive with you.

Find someone who loves cars to accompany you to have a look!

See if it's the version you want.

Nothing was wrong.

But it's better to buy FSV

The Junjie is too old.

The domestic cars are cheap, but they are all a little faulty, the quality is about the same, and there is no problem if you drive.

If you really want to, just find an expert to go and listen to the sound of the engine, whether it has been overhauled.

If you can, check if there is a traffic accident and why the owner wants to change the car.

The car is still ok.

Buy second-hand. More depressing than buying a new one. This car has a score of 0 in a foreign five-star collision. Let's think about other cars for yourself! ~

My Junjie is also a 2011 model, I feel that the fuel consumption is a bit high, about 9 or so, the start is not strong, and it is no problem to drive.

It's not bad, it's more cost-effective, and it's also a relatively good domestic car.

This car is average in every way! Let's see what kind of car you compare to! ~

I also want to buy it has been under consideration.

If you travel, Kaiyue is the best, ** cheap, but it is equivalent to the same level of Japanese and Korean cars are a little fuel-efficient. Sporty, Cruz is more cost-effective. Of course, if you have plenty of money, Lavida's reputation is very good, but the new car suggests that you are going to go to formaldehyde You can go to **buy a box.

Sterilizer King's is very easy to use.

If you're sure the engine is okay. Check the foot glue.

China can be said to be the pride of China!

He is taking the route of low profit margins!

Because he has the production rights of BMW Brilliance, he has the first month near the water!

Technically you can get some guidance!

The relevant configuration is high!

1. Junjie Zunchi body uses laser welding, in addition to some German cars, which Japanese car (including Accord, etc.) body is not spot welded?

Second, Junjie and Zunchi are equipped with Goodyear and Michelin tires at a price of about 100,000 yuan. After the price reduction of the domestically produced Passat, it was changed from the original Goodyear to Hankook tires, but the total ** is still higher than that of Junjie and Zunchi, not to mention the tires equipped with Japanese cars.

Three Junjie and Zunchi use high-strength double-sided galvanized steel plate imported from Japan plus BMW paint (strong scratch resistance), small Japanese and South Korean cars, especially Guangben in order to reduce costs do not need to import steel plates, buy a Shanghai Baosteel just make do with anyway, many Chinese are easy to be fooled, the next bird drop can smash a pit.

Fourth, Junjie and Zunchi and the engine cover and trunk are supported by pneumatic telescopic tie rods, which are generally matched by more than 200,000 cars, and the domestic Ruizhi 200,000 are all used ordinary fixed tie rods.

This car is good!

You'll spend a lot less money!

Especially the chassis! People who have driven this car say yes!

I used to be skeptical of China too!

But after an actual drive! Change your mind!

China is an old factory! The credibility is good!

There is no problem with after-sales!

Buy it if you want to! Own it one day sooner, enjoy it one day earlier! Hehe.

The appearance of the car is good, a little bit of the shadow of BMW, just a little, atmospheric enough, the interior is a little rough, the power is okay if you don't care too much, but there are more small problems, and it's okay to buy such a car for the ** of million.

If it is for home use, it is recommended not to buy it.

If you don't have a lot of money for business, you can consider buying it.

The 10-year warranty of 200,000 km is quite attractive.

More than 90,000, the speed is almost good, the others are good, the most important thing is that it is cost-effective, if you pursue power, it will not work.

I also use this car, it feels OK, there are not too many small problems, only the brake bulb has been replaced, the wiper has been replaced, the others have not been broken, the brake is very good, I have encountered the emergency brake, it is really stable.

Support domestic production, I hope that China can one day be as popular as Camry and Passat.

Atmospheric, heroic, support domestic !!

Junjie's shape should be the most attractive element, first of all, similar to the BMW car's air intake, double lines from the windshield to the bottom of the bumper, a pair of three-column black background headlights are very spiritual, hard and straight a waist line from the front to the rear, so that the overall body side smooth and sporty, Junjie's most attractive position is the wheel of the old man is only missing, the big wheel gap and the body form a large proportion, the vehicle is very sporty, through this can see the shadow of a high-end sedan. The two-tone interior trim panel makes the passengers in the Junjie feel that the car is stable and generous. In terms of power:

The performance of the vehicle is relatively gentle, from the start to 120 kilometers of acceleration, the engine output is very flat, as if it is difficult to find the power output point, although it has 100kw of power, but the weight of 1415 makes the tonnage power ratio is not large. In general, the biggest advantage of Junjie is that the appearance is full of charm, the interior is stable and generous, because the body of Junjie is very rigid, so the safety is relatively high, and it has a high cost performance. The lack of suspicion is that the power of Junjie compared with its service and training its vehicle advantages are not obvious.

Interior details could be improved.

Junjie is a classic family sedan that integrates the concept of European car manufacturing, originates from BMW pedigree, receives technical support from Porsche, and is created by Chinese and European experts. Junjie adopts the design of the Italian Binfa company, which integrates the dynamic dignity of the West and the mellow atmosphere of the East, and is called "Little BMW" and "Chinese-style BMW" by many car owners because of its resemblance to a treasure cover closed horse. The quality of workmanship has surpassed all the models of Wuchang's own brands, especially the body craftsmanship is amazing, and the interior workmanship has also been upgraded to a level compared with the previous Chinese cars

The grade and workmanship of the materials are very high-grade, and the arrangement of various buttons is also very reasonable, and the picky place is that the gap between the seams of the interior panels is too large.

1. How to set the correct sitting posture 1The distance between the steering wheel and the body should be based on the back of the seat and the wrists of both hands touching the upper edge of the steering wheel. 2.Push the clutch to your head, your knees should be slightly curved, and your back should be close to the back of the chair; 3.

After adjusting the sitting position, operate the clutch and gear repeatedly to see if there is anything wrong, and then make fine adjustments. Second, throttle control is actually an exercise of the sensitivity of the soles of the feet, whether your car can become a part of your body in the future, the soles of your feet have the most right to speak. First of all, stop and hang neutral, give oil, and see if you can fix the speed at a certain speed.

After being proficient, you can practice this step while driving, and after that, you can practice this step in first gear, because the speed ratio of the first gear is large (like the power arm of the lever), the sensitivity of the throttle is the highest, and it is not easy to control. 3. Gear shift Gear shift is a manual way to convert the gearbox gear ratio to adapt to different road conditions and driving performance. Take turning low gear as an example, it is suitable for overtaking, downhill (engine braking); On the other hand, the high-speed is suitable for high-speed driving, reducing the rpm and reducing the load on the engine.

There are two common mistakes made when operating the gear lever: 1Holding the clubhead too hard, resulting in a stiff shift action, or even a misplaced gear.

The correct way to do this is to hold the clubhead lightly, as long as it does not cause the clubhead to slip. 2.The action of shifting gears was too hasty.

Of course, the faster the shift, the better, but if it's too fast, it's easy to get into the wrong gear. Therefore, no matter how fast it is, you should stop in the neutral for a while, and let the wave rod return to the center, as a reference for the next gear, which is the best way to avoid the car and avoid entering the wrong gear. Once you're familiar with this shifting method, it won't affect the speed of the shift too much.

4. The clutch is mainly composed of a group of friction plates, which are located between the engine and the gearbox, and transmit the power of the engine to the gearbox. Generally, the clutch pedal should be fast, and the loose should be slow, otherwise there will be a large loss of the clutch. Sometimes, at very slow speeds, the clutch will enter a semi-clutch state, sending some power to the gearbox to adapt to slow speeds.

However, this method directly causes wear and tear on the clutch, so it must not be done as a last resort. Summary: 1. Three things to do when you get on the bus:

adjust the distance of the seats, the height of the steering wheel; adjust the three mirrors; Wear a seatbelt. 2. Starting action: step on the clutch, step on the foot brake, release the handbrake, check whether the gear is in neutral, ignition, hang a gear, release the foot brake, slowly lift the clutch, and lightly step on the accelerator at the same time until the car starts to release the clutch.

3. Gear shifting action: release the throttle, step on the clutch to the end at the same time, shift the gear to a gear suitable for the speed of the vehicle, lift the clutch at an appropriate speed according to the gear level, and lightly step on the throttle at the same time; The upshift is the same as the downshift. 4. Brake action:

Apply the brakes with appropriate force and press the clutch to the end before the car comes to a complete stop. 5. Parking action: After the car is completely stopped, put the gear into neutral, pull the handbrake, release the foot brake, release the clutch, and turn off the car.

It's better to buy it after 07! 07 After that, some optimizations and adjustments were made, and there was little difference

Garbage, there are too many small problems, the joint venture car is relatively stable, and at worst, you have to buy a Korean car and drive it worry-free.

It's rotten, there are too many small problems, the joint venture car is relatively stable, and at worst, you have to buy a Korean car.

Is the car around 07 the beginning of the year or the end of the year? Whether it's luxury or economy, because these are different** also vary. The comfort of 07 should be around 60,000, and the hand is around 70,000.

As for the car that has been out of the factory for two years, I personally think we should pay attention to the following points:

1. Pay attention to this note that it is better to find an old driver or maintenance master to see, saying that it is a useless car, but also to check and check, this can not be sloppy, if the accident car or something is not easy to do, my buddy was on a fool, buy Jetta is the sales manager of the business went out to do something accident, after the overhaul has not been sold, and then let him buy, and later found that it is more than 10,000 to come back. So be sure to see if this is a similar situation, just in case! As for what to check, I don't need to prompt you, as soon as the master makes a move, people can see it.

2. Brilliance's Junjie is guaranteed for two years or 60,000 kilometers, if you are a stock car, ask how to deal with this situation, do not want the seller's guarantee, you need a written one, and give Brilliance's 400 to verify the feasibility of this way.

3. It is best to have the original net price of the invoice when purchasing, because in this way, when you sell the car in a few years, you will have a good selling price.

4. About the insurance must be explained in advance, check the big frame number and license plate number after the insurance, etc., whether it is full insurance, and then pay together after this is done, don't pay for the car and people don't care, so it is best to set a written purchase and sale contract before handling these, and then pay in full after processing, which is really important!

Hehe. Finally, I really wish you all the best in your car purchase!

Ten thousand at this price on our side, Shandong.

Around 07 years, Brilliance Junjie mainly has two kinds of manual comfort and manual luxury, of which the luxury type occupies the main share, and the manual luxury type around 07 years is generally assessed at about 70,000 yuan. It varies depending on vehicle condition, region, insurance, and mileage. Due to the limited total ownership, there are not many cars in the second-hand market at present.

This depends on your specific car condition Kilometers Repair Records Maintenance Records This car is not much in the second-hand market.