How to maintain the refrigerator after moving How to move the refrigerator when moving

Regular and proper maintenance of your refrigerator can extend the life of your refrigerator and also protect the quality of your food. However, be sure to unplug the refrigerator before caring for it to avoid electric shock. 1.

Clean the back or bottom of the refrigerator frequently from the condenser and compressor of the refrigerator. Dust can be removed using a vacuum cleaner or brush. Be careful not to use a damp cloth to wipe dust off the refrigerator and compressor.

2.When the refrigerator is out of use for a long time, you should first cut off the power supply, take out all the food in the box, clean up the inside and outside of the box, and open the door for a few days to fully dry the box and dissipate the odor in the refrigerator. 3.

Check the drains. If the drain is clogged, the water will leak into the refrigerator. Poke the drain pipe with a wire to remove the build-up on the drain.

4.Do not neglect to clean the door seal, dilute the bleach with 10 times the water, moisten it with a toothbrush, and finally rinse the bleach with water. The rubber strip is dirty and easy to age, which will affect the tightness of the refrigerator and increase power consumption.

5.Check vibration, noise, and compressor temperature. When touching the compressor shell during operation, there should be no obvious vibration, and the sound of the compressor starting should not be heard during the day.

6.Pay attention to check whether there are cracks in the power cord to prevent leakage. 7.

Wash and dry the inside and outside of the refrigerator with warm water or mild detergent, and leave the refrigerator door open to air and dry for a day. Precautions for refrigerator maintenance: (1) The refrigerator should be cleaned regularly (at least twice a year).

When cleaning the refrigerator, first cut off the power supply, dip a soft cloth in water or dish soap, scrub gently, and then wipe off the dish soap with water.

2) In order to prevent damage to the coating layer on the outside of the box and the plastic parts inside the box, do not use laundry detergent, detergent, talcum powder, alkaline detergent, Tianna water, boiling water, oil, brushes, etc. to clean the refrigerator.

3) When the accessories in the box are dirty and dirty, they should be removed and cleaned with water or detergent. The surface of the electrical parts should be wiped with a dry cloth.

4) After cleaning, plug in the power plug firmly and check whether the temperature controller is set in the correct position.

5) When the refrigerator is not used for a long time, the power plug should be unplugged, the inside of the box should be wiped clean, and the door of the box should be closed after the box is fully dried. Moved by Guangzhou Volkswagen.

Xiao Yi picks this!

If you move your hands, you can't turn on the power within 1 hour

1. The refrigerator should be placed in a dry and ventilated place, at least 20 cm away from the wall, to prevent direct sunlight and not close to the heat sourceBecause the ambient temperature around the refrigerator is high, it will increase the power consumption of the refrigerator.

2. The refrigerator should use a three-phase power plug with grounding or zero connection protection;

3. Do not rinse the refrigerator with water;

4. Do not store alcohol, light gasoline and other volatile flammable materials in the refrigerator to avoid accidents caused by electric sparks;

5. In order to prevent poisoning caused by the leakage of refrigerator refrigerant (ammonia or fluorine), once it is found that the refrigerator refrigeration is abnormal, or when it is directly observed that there is liquid and oil leaking out of the condenser tube, it is necessary to repair the leakage in time.

6. The refrigerator compressor maintains a large pressure difference between the suction side and the exhaust side after shutdown. If it starts immediately, the piston pressure of the compressor increases, and the motor is likely to be burned. Therefore, in case of a power outage, unplug or turn off the power. Temporary power outages can only be turned on after 3-5 minutes.

If you want to move the refrigerator, there is no way for a person to move the refrigerator, the refrigerator is very large in size and very heavy, even if you move it alone, the center of gravity is slightly unstable, and it is still very dangerous to fall. And the refrigerator must be carried upright, and the inclination of the refrigerator cannot be greater than 45 degrees. So it's impossible to move alone!

Here's how to handle the refrigerator:

1. Two people carry, one person lifts the front door foot, and one person lifts the top after lifting, which is labor-saving and safe;

2. If it is a very old refrigerator, the back side should be sided, and the old refrigerator should not let the refrigerator tilt angle more than 45°;

3. If it is a refrigerator purchased in the last 6 years, a person has to carry it backwards and lie down, but the refrigerator must be upright and static for 3 to 8 hours before use.

The above answer applies to various brands of refrigerators.

Do not move the refrigerator upside down, it will damage the service life of the refrigerator. On the bottom inside the back wall of the refrigerator, there is a compressor, and there is some lubricating oil at the bottom of the compressor as well as inside the housing of the electric motor. If the refrigerator is lifted upside down or tilted excessively when moving, the lubricating oil will flow into the refrigeration system above the compressor and motor, which will hinder the circulation of Freon in the refrigeration system and affect the normal operation of the refrigeration system.

How to transport the refrigerator:

1. Unplug the power plug, cut off the power supply, take out all the food in the refrigerator, fix the moving parts of the refrigerator shelf, humidor and freezer drawer with tape, close the refrigerator door tightly, and fix it with tape to avoid being opened when moving.

2. Because the inclination angle of the refrigerator using the reciprocating compressor is not too large in the handling, if it is greater than 45 degrees, the spring in the compressor will be deformed due to uneven force, and even cause decoupling, and the compressor will lose its original balance and produce abnormal noise and damage to compression.

3. After transportation: it needs to be put on for at least 2-3 hours before it can be energized to protect the life of the compressor, because the compressor is moved due to the shaking of the refrigerant in the cooling pipe, it must wait for the impurities in the refrigerant to precipitate before it can operate, otherwise when the compressor sends out the refrigerant, it will block the high and low pressure valves, resulting in a decrease in the refrigeration effect.

The refrigerator with a rotary compressor will not have the above phenomenon, and can be carried upstairs in a lying position and tilted upstairs.

1.Empty the fridge: Before moving, remove everything from the fridge, including food, drinks, ice, etc. If frozen foods are available, they can be kept in an incubator or in an ice pack to keep them frozen.

2.Power outage: Before moving, be sure to unplug the power cord of the refrigerator to avoid electric shock accidents.

3.Unconnect the water pipe: If the refrigerator has a running water pipe, it needs to be removed to avoid the water pipe being broken or damaged during handling.

4.Moving the refrigerator: When moving the refrigerator, you need to pay attention to the following:

Please carry the refrigerator with at least two people to ensure safety.

When carrying the refrigerator, it is necessary to tilt the refrigerator to one side for easy movement. However, do not tilt the refrigerator too much to avoid leakage of liquids inside the refrigerator.

When transporting the refrigerator, it is necessary to use special handling and burial tools, such as moving trolleys, to avoid damage to the refrigerator during the handling process.

When carrying the refrigerator, it is necessary to carefully walk through doorways and stairs to avoid collisions between the refrigerator and the door frame or stairs.

5.Install the refrigerator: After moving the refrigerator to the new home, you need to install the refrigerator, including connecting the power cord, water pipes, etc. When installing the refrigerator, it is necessary to make sure that the refrigerator is in a horizontal state so that it can be used normally.

1.Empty the refrigerator: Remove all food, chain mold drinks, and other items from the refrigerator and place them in an incubator or other container. Trembling.

2.Turn off the refrigerator: Turn off the power to the refrigerator and unplug it.

3.Unconnect the refrigerator: If the refrigerator is connected to a water source or sink, you need to turn off the water source first, and then remove the water pipe.

4.Move the refrigerator: Gently tilt the refrigerator back, then slowly pull it out forward. If the fridge is too heavy, ask for help.

5.Wrap the refrigerator: Wrap the refrigerator with a soft material such as styrofoam or felt to protect its surface from scratches or damage.

6.Moving the refrigerator: Place the refrigerator on a trolley or pulley for easier handling.

7.Place the refrigerator in the new position: Gently push the refrigerator into the new location and lay it flat. Reconnect the water and power sources and wait for the refrigerator to reach the proper temperature before putting food in.