If you want to buy a Huawei phone, ask for a recommendation! 2000 or less

1. Screen: The screen size is inches, and the screen color is 16.7 million colors, making it more comfortable to watch movies.

2. Camera: rear triple camera: 13 million pixel main camera lens + 5 million pixel ultra wide-angle lens + 2 million pixel depth of field lens. The front camera has 8 million pixels, and the photos are more delicate and clearer.

3. Performance: Based on Android 10) system, equipped with MediaTek MT6853 5G, octa-core processor, bringing high-speed and smooth experience.

4. Battery: Equipped with 5000 mAh (typical) large-capacity battery, long-lasting battery life.

The new machine recommends Huawei NOVE8SE 8 128 10-minute fast charging with an inch screen and 48 million triple cameras.

1. Make a U disk boot disk, enter PE mode, run DiskGenius, see if you can find your solid state drive, it is easy to identify, look at the capacity, if you can find it, click the right button to format it directly, do not use quick formatting.

2. In the second step, if your SSD is a boot disk, set it as the "active" primary partition, and all the HDDs will be converted to logical partitions.

3. If PE does not recognize the SSD, open the chassis and replace the data cable or port.

4. After eliminating the above problems, it still can't be read, it is estimated that it is written protection and needs to be repaired. Of course, if the problem is not big, you can use DiskGenius's disk bad sector repair program to fix it, but it takes a long time, you can wait patiently, and you can use it after the repair is completed, pay attention to the backup data. You need to use a USB flash drive to install the system, and first reformat the machine, because the first time you install a new hard disk, it will detect that the original system has booted, and it will cancel bootmgr100m by default.

So the solid state doesn't have this boot anymore, you can only format the mechanical solid state and reinstall the system, and you don't need to set up the BIOS. Bootmgr boot will automatically prefer the first detected system and automatically boot (but you can now boot up with a quick boot, because the solid state does not boot so you can use the BIOS to boot quickly, follow my method above to modify the boot disk).

Connect the SSD to the SATA0 port of the motherboard, connect the HDD to SATA1, and then restart the computer to identify it. If it is still not recognized, we can remove the mechanical hard disk first, leaving only a solid state on the motherboard and then enter the BIOS to see if it can be recognized, if it can be recognized in the BIOS after setting it off, install the mechanical hard disk and restart it. If there is still no way to identify it, we will go into the BIOS and find it:

load setup defaults, press enter, and reset the settings in the BIOS again. If none of the above methods work, it is likely that the SSD does not have a partition, and we only need to enter the PE system to divide the SSD into a zone to solve the problem.

Finally, if you still can't identify it, you should consider whether the SSD is damaged, because the SSD is fragile and has a short service life, and it is likely to be damaged after about five or six years of use.

The Huawei Honor series can be purchased.

You can buy the Huawei Mate series or the P series, or the Honor's X series and Play series, you can do it.