Shenzhou Tianyun F4200 D2 air outlet

It's the same with my 4200.

1. The reason is that the fan is blowing to the radiator, strictly speaking, the air outlet is not the fan outlet, but the radiator outlet, the wind is shunted by the radiator, and it is relatively small when it reaches the air outlet, which is actually an advantage, at least to achieve the silent effect.

2. In fact, if you use it in a harsh environment for a long time, the temperature of the air outlet is still very high, you can try it if you can't bear it.

4、As for the keyboard heating,It's also normal,The keyboard and palm rest are good heat dissipation channels for this book,It is recommended that after a long time of use,Don't close the monitor for the time being。

It's still HP530 is better, after all, the high point of the online review of the Elegance series, it is recommended that HP530, or HP540 is better.

Good looking. Strong texture.

The vast number of molds... 3299

The mold has been improved and looks better. Compared with HP530, that is, 530 has two memory slots, 4200 has only one, HP530 is Quanta foundry, and I personally think it is better. But 530 is a combo optical drive,No HDMI interface, Measure it yourself, hehe

There is a screw on the back of the machine, which is used to attach the hard drive cover. It should be a bit rectangular. Unscrew it and take it off to see the hard drive. The hard drive has a bracket that is fixed to the machine. The screws on the bracket come out as soon as you pull the hard disk back.

The air outlet is used for air supply in the air conditioning system, generally there will be no filter behind it, the surface will be very clean, and there may be condensate accumulation on it when sending cold air; The return air outlet usually refers to the return air outlet of the air conditioner, generally speaking, it will have a filter behind it, and there will be black dust on the surface of the air outlet in the corner, which is easy to distinguish; The new air outlet uses a fan to send the natural air from the outside directly to the required area, and it is generally also equipped with a filter;

The air outlet is generally a square diffuser, which is detachable in multiple layers in a square row, and is generally connected with fireproof canvas; Water droplets hang on it when the cold air is sent! The return air outlet is mostly rectangular, and it is called a single (double) louver tuyere, and has a filter screen; The main function is to suck the dirty air back. The new air outlet is smaller, and the one installed on the wall in each room or in a straight line at the air supply outlet must be the new air outlet!

The exhaust outlet is generally a grid type, installed on the outer wall, the main function is to discharge the indoor dirty air to the outdoors, and the axial fan is mostly used because the machine mouth is round, and the iron air duct is generally used to connect it for construction! Most of the indoor installation locations are in a corner not far from the machine room!

Yes, I googled it anyway. D2 and D3 are just newer symbols. The f4200 exists. Shenzhou's ** is poor. Anyway, I found the drive myself.

I also encountered this situation, the F3000D6 model, bought in the Shenzhou store, I wanted to drive down, only to find that there was no such model on the official website. I don't know what's going on, can Shenzhou Company take a look.

I haven't used Tianyun, but I still recommend you to buy the Shenzhou Elegance series, and I'm using the HP650 right nowIt's really good. Performance is not to be said.

Hehe, cost-effective.

They all shouted that they were cost-effective, and they went to see 7-up V98 and Shenzhou L700T to know what it was called cost-effective.

I regretted it after reading it.

There is only a small amount of air outlet above, the side is the main air outlet, generally this is not to show the air intake, the fan is mainly the air outlet, and there is a small amount of air inlet at the bottom.

Of course, it is not the same air outlet air supply linked to the air outlet of the air tray, which is generally made into a top and sent back to the top of the air outlet evenly distributed, and it is necessary to pay attention to the air supply outlet and the return air outlet should not be too close.

Please take a look at more books on air conditioning.

**The air inlet and outlet of the air conditioner are the same coil (wind cabinet), and there is a heat exchanger called the surface cooler in this coil (wind cabinet), the process: air air inlet (return air) surface cooler outlet.

Of course, it is not the same air outlet air supply linked to the air outlet of the air tray, which is generally made into a top and sent back to the top of the air outlet evenly distributed, and it is necessary to pay attention to the air supply outlet and the return air outlet should not be too close.

**Difference between air conditioning inlet and outlet:

The size of the indoor unit capacity is generally only visible to the air conditioning tuyere, so the size of the air conditioning tuyere is very important, if the design is not reasonable, it will cause visual pollution in the future, and bring a lot of trouble to the use. The air conditioning tuyere needs to be flexibly adapted according to the home decoration in the actual design and installation process, and the size of the air outlet depends on the size of the indoor unit capacity.

If the size of the air conditioner tuyere is too large and the air duct is too long, the airflow velocity will decrease, which will affect the use effect of the air conditioner; If the size of the air conditioner's air vent is too small, the airflow velocity will increase, which will cause discomfort caused by the wind blowing directly on the body, and may also lead to excessive noise. There are three main ways to send back air from the air conditioner: side to the bottom, down to the bottom, and side to the side, because the wind speed of the air conditioning return air outlet is generally greater than the air outlet, so when the air volume is constant, the area of the return air outlet is larger than the air outlet.

It's best not to be together, because if you are together, some of the wind is directly removed from the air outlet after the air supply, and an effective air supply cannot be achieved, but like the fan coil type is together, there is a question of whether there is fresh air, please ask whether your exhaust air is fully discharged or partially used as return air.

The design of the air outlet and return air should ensure that the indoor air flow is uniform, of course, the air outlet and the return air outlet should not be too close, otherwise the air coming out will enter the air conditioner, resulting in a short circuit of the return air is not good;

Air outlets and return air outlets, placed there can be a collection of interior decoration free design,