How to control the size of the capacity of the digital camera to take pictures

The tenth-level hero upstairs must solve the problem fundamentally.

1. Each digital camera will have a ** size setting (2m, 3m, 6m......You can do this through the camera's menu, or through the setup.

2. In addition, you should check the format of the storage **, if you don't use it for other purposes, try to set it to. The format of jepg is relatively small.

The main thing is to take out your manual and take a look, there must be an introduction to this aspect in it. If you don't have the manual at hand, or the camera doesn't belong to you. Then search the Internet for the manual of the corresponding model, or try to adjust it yourself according to the two buttons of "menu" and "setting".

In addition, the size limit of ** uploaded to the Internet can be done by many drawing software. It's the most basic feature, and it's easy to get started. You can take a look.

Among the various answers, choose the one you think is simple.

Cameras have pixel selection, and quality selection! Such as:

If you want to be smaller, choose a smaller size!

Actually, the general ones are uploaded!

If you think it's too big, you can cut it to make it smaller!

Digital cameras have a special choice of file size, you just need to read the manual and follow the requirements. In addition, the general ** size transmitted to the Internet should not be greater than 50k, such clarity is definitely enough. And it doesn't slow down the other person to open it.

How can it be so big! The average photo is only a few megabytes!

It's easy to upload QQ space.,Isn't there an upload tool on the left side when you upload.,That thing can automatically adjust the size of the photo.,If you have to adjust it yourself.,Send me a message.,I can send it to you.,You can also find my Q in my space.

The main thing is the problem of phase resolution!

Simple, generally adjusted to about 1600 1200 is enough.

You can set it in the camera's settings, and here's how to set it up.

Tool: OPPO phone.

Raw material: camera.

1. First turn on the OPPO phone and find the camera, as shown in the picture below.

2. Then find Zhixinhuai to the settings button and click to enter, as shown in the figure below.

3. Then find the friend resolution and click on it, as shown in the figure below.

4. Finally, select the size, as shown in the figure below.

1. First of all, you need to open the software and find the super camera on the desktop that opens the mobile phone of Tuanhuila.

<>3. You can see each option, click on the selection in the upper left corner of the page, **Size.

4. In the list, we can see that there are different proportions and non-slippery sizes for us to choose.

5. Find the size you need, and then click to choose to use.

Digital cameras. **Size settings 1200, 2048 1536 are OK.

The size setting of the digital camera** is mainly to see whether the pixels meet the requirements, and the pixels are the most important indicators to measure the digital camera. Pixels refer to the resolution of a digital camera.

Mainstream SLR digital cameras have more than 20 million pixels, but 10 million pixels for ordinary photography and home use are enough, because the resolution of the display we use is limited and hail, generally 1366 768 to 1920 1200, such a resolution If the display pixel is too high, it will be compressed to the size of the current screen, and some will be distorted due to excessive sharpness.

You can set it in the camera's settings, but here's how to set it.

Tool: OPPO phone.

Raw material: camera.

1. First turn on the OPPO phone and find the camera, as shown in the picture below.

2. Then find the settings button and click to enter, as shown in the figure below.

3. Then find the resolution and click on it, as shown in the image below.

4. Finally, select the size, as shown in the figure below.

1. First of all, you need to open the software, find the super camera on the desktop and open the mobile phone2, click on the more functions in the upper left corner of the page on the jump-open interface3, you can see the various options, click on the selection in the upper left corner of the page, **The size 4, in the list we can see that there are different proportions and different sizes for us to choose 5, find the size you need, and then click to choose to use.

Generally speaking, the "size" is only involved when printing paper, which is expressed in inches or centimeters, and the size on a digital camera is set to the number of pixels or the total number of pixels. Different digital cameras have different ways of representation.

Digital cameras can set the size of the setting in the shooting menu.

The intuitive representation of this is how many pixels x how many pixels the wide and high sides are. For example, 4000x3000 represents 12 million pixel output, 4:3 ratio.

Some cameras are expressed in terms of the total number of pixels plus the aspect ratio, such as 12m (4:3) for the same size **. There are also some cameras that only use L, M, and S to indicate ** size.

In addition to setting the size of the output, storage quality is also one of the key elements to set. Generally, it is divided into RAW, fine (F), standard (S), economic (E), etc. Among them, RAW is the lossless raw information storage format of high-end cameras, and fine, standard, and economical are all JPEG compression storage formats, but the compression ratio is different.

The fine compression is relatively small, and the information loss is small; The compression ratio of the economy is very large, and the loss of information is serious.

To change the size of **, press the func key--- use the up and down keys to select L--- and use the left and right keys to select the size of the number of pixels. The larger the number of pixels, the larger the file size.

Then use the upper arrow keys to select the compression ratio, which is a 1 4 circle icon above L. The compression ratio is very fine, there is no compression at all, and the capacity is maximum.

**The size of the file is not only related to the resolution and compression ratio, but also related to the composition of the subject, especially the color. Colorful**, the largest file size.

Usually shooting, if you don't put ** very large, the number of pixels is set to millions, and the compression ratio is set to fine. Don't put ** very large, too large resolution settings, in addition to reducing the utilization rate of the card, it can be said that there is no benefit.

The larger the resolution, the larger it can be washed, and the size of the image is not only affected by the resolution of the image, but also has a lot to do with the scenery you shoot: if you only shoot the moon in the night, no matter how large the resolution is, it will be hundreds of k, and if you are shooting something with complex colors such as a sea of flowers, the larger the resolution, the larger the resolution.

Generally speaking, the higher the resolution of the camera, the more space it occupies. 4000*3000 is the highest resolution of this camera, and there is no need to set it so high, because no one will put it extra-large.

If you want to flush a 6-inch **, you should set it above 1800.

You don't understand the problem you are talking about. If you take a photo, you can change the camera's settings options to change the size of the shot**. Be specific''menu''menu, Settings - pixel size. Depending on the camera, it can range from tens of ks to tens of megabytes.

If it is a finished product, you can use ps to change the size of the product to control it. You can also use similar software such as "Keniu Image" to change the size

** size for the household, there is no real use.

The usefulness of high pixels is mainly reflected in the printing**.

For home use, you generally only need to print 7-inch **, so you can rest assured that 1024x768 will definitely be enough, and then choose a large one, you can't use it.

The image size set by the camera is**The actual size is generally expressed in pixels My display is 12m 8m, etc. Representing 12 million pixels 12 million pixels The size of 12 million pixels is 3000*4000 Of course, if you directly use a number like 3000*4000, it is OK.

What you said**On the computer, the computer's **viewing software will default to the appropriate window to put ** points, with the actual size will become the actual size.

There is also the washing ** when generally according to the uniform size of the flush that is to say, if it is 8 million pixels and 12 million pixels if they are washed 6 inches (the size of the ordinary family ** photo paper) is also the same size I can't see the difference unless you specify in advance what size you want to wash before rinsing **.

If you look at it on the LCD screen of the camera, you can't see the size, because the general small number will be magnified by the same magnification instead of magnifying to the actual size, the difference is that when you put it to the maximum, the high pixel is clearer than the low pixel, if you want to see the actual size, it is best to put it on the computer to see the actual size (some are called actual pixels) You can see the difference in size.

**The size is in pixels, the lower the pixel, the smaller the size, such as the 12 million pixel camera can shoot 4000 * 3000 dozen small**, reduce the resolution to reduce the size, of course, different cameras change the method, but you can find options like 4000 * 3000 in the menu, change it smaller.

The larger the resolution, the larger it can be washed, and the size of the image is not only affected by the resolution image, but also the scenery you shoot has a lot to do with the feast: if you only shoot the moon in the night, no matter how big the early resolution is, it will be hundreds of k, and if you are shooting something with complex colors such as a sea of flowers, the larger the resolution, the larger the larger.