Why did my 360 recovery system recover something and reboot again?

Method 1.

Once the reinstallation is complete, a shortcut called Recovery System will be generated on the desktop. Double-click the shortcut directly, that is, you can start the recovery process as shown below

Method 2: When you open the 360 system reinstall master again after reinstallation, you can select the rollback system from the interface. As shown below:

Method 3: When the system is shut down, the recovery item of the 360 system reinstallation master will appear in the boot menu. After powering on, press the up and down buttons to select the corresponding recovery item and restore it to the reinstalled system state. As shown below:

Reinstalled except to use data recovery software to scan the C drive to recover files,There is no other way,And it may not be possible to restore successfully,Of course, there was a backup system before,Say otherwise。

In order to facilitate the user's recovery to the system before reinstallation, the software will back up all the system files before the reinstallation in the C: $360rtsys folder, after the reinstallation, as long as the new system has no abnormal problems or has not forgotten to restore the data, you can click the [Delete original system backup] in the upper right corner of the main interface of the reinstall master to free up the space of the C disk or wait until 7 days later, the reinstallation master will automatically delete the backup directory, that is, part of the space of the C disk is occupied by hidden files, you can restore it according to the above instructions.

Restoration is only possible with backup.

(2) Set the CD to start: After booting, when the motherboard self-test screen or brand logo screen appears, quickly and continuously press the BIOS hotkey (different brands and models of computers have different BIOS hotkeys, notebooks are generally F2 keys, desktops are generally DEL keys) to enter the BIOS setting interface. Press the left and right arrow keys to move and press enter to enter the boot (or startups) tab, select the boot option by pressing the up and down arrow keys, and press the + or - keys to move the boot option to set the optical drive (cd-rom or ***-rom) as the first boot item (the old motherboard needs to enter the advanced BIOS features tab, press enter at "1st boot device", and then select cd ***-rom), Press F10 again to save and exit the reboot.

Some new motherboards support pressing F12 or F11 to enter the boot options menu after booting, and you can directly select the optical drive without entering the CMOS interface. Insert the system disc into the optical drive in time when you restart the computer. After the system is reinstalled, pay attention to setting the hard disk as the first or second boot item.

3) Clone and install the system: After the disc is successfully started, the function menu will be displayed, at this time, select "Install the system to the first partition of the hard disk" in the menu, press enter to confirm and follow the prompts, or after entering the PE system, run the "one-click installation system" on the desktop, the computer will automatically run the GHOST software to automatically load the GHO file and clone and install it to the C area, the whole process basically does not require manual intervention, until the last entry into the system desktop.