How to restore factory system after jailbreak of apple phone

To be clear, jailbroken iOS devices cannot be factory reset through restore in [Settings], and the result of this operation is "white apple"! There are two outcomes of a jailbroken restore, one is to erase all content to keep the jailbreak, and the other is to erase all reverts to an unjailbroken state.

1. Erase everything, but keep the jailbreak with the help of Ilex Rat or semi-restore.

1. Ilex Rat can be installed directly on the iPhone through Cydia, and the iPhone operation restores the pure jailbreak system.

2. semi-restore needs to be operated on the computer, semi-restore, **After installation, connect your iPhone to the computer, click Semi-Restore on the application interface to start the recovery operation.

2. Erase all reverts to an unjailbroken state with the help of Cydia Impactor.

Currently, Cydia Impactor only supports and, since the tool will delete all your settings, apps, and other content, so be sure to back up your data before you start. Once the tool is executed, all jailbreak files will be deleted and the iOS system will remain in its original version. Also, the tool doesn't support the 6th generation iPod Touch, which has just been released.

It is recommended to use iTunes to flash the firmware method to restore the factory settings,If you are troublesome,You can go directly to the Apple authorized repair center,Ask them to help you restore the system,Soon,10 minutes or so、

After jailbreaking, only flashing can be recovered. I can help you farm remotely.

<><3. Before restoring, be sure to back up important data, ** number, etc., and then connect the phone to the computer with a data cable, click to open the installed iTunes.

4. Click on the iPhone in the page to enter the iPhone page.

5. Hold down the shift key on the keyboard and press the restore iPhone on the page at the same time, a dialog box will pop up to select the file, select the firmware and click OK to start the recovery. Just wait for the recovery to complete.

1. Use flashing to restore the unjailbroken state.

Launch iTunes and connect your phone to your computer with the original cable.

In the iTunes window, tap the iPhone icon on the top right.

Then click on the "Back Up Now" button.

Wait for the backup to complete before proceeding to the next step.

Turn off your phone. When the Apple logo appears when the device is restarted, do not release the power button, and press and hold the home button on the home screen until the screen goes black.

Release the power button at this time, but not the home button until iTunes displays: An iPhone in recovery mode has been detected.

Next tap on the Restore iPhone button.

Then iTunes prompts us if we want to erase the data and recover.

Click OK and wait for the recovery to complete (do not move your phone and cable during the process) The recovery is complete, restore the data, and turn it on.

2. Use a flash-free machine to restore the non-jailbroken state (only some system versions are supported).

When using this software, you must turn off functions such as: Find iPhone, iCloud, etc., it is recommended to uninstall some plug-ins, especially security protection software.

Reset jailbroken iPhone to non-jailbroken state steps:

1. When your iPhone is powered off, connect it to your computer with a data cable and open your computer's iTunes software.

2. Press and hold the power button for 2 seconds.

3. Press the home button for 10 seconds without letting go of the power button to force it to shut down.

4. Without letting go of the home button, press the power button 1 time. Keep not letting go of the home button for about 15 seconds, and the phone screen will display the Connect iTunes icon information to enter DFU mode.

5. The computer has a sound and text message to indicate that new hardware has been discovered, and iTunes has an iPhone that needs to be restored.

Click Restore to restore the iPhone firmware (Shift-click restore to select other iPhone firmware on your computer).

1. When your iPhone is powered off, connect it to your computer with a data cable and open your computer's iTunes software.

2. Press and hold the power button for 2 seconds.

3. Press the home button for 10 seconds without letting go of the power button to force it to shut down.

4. Without letting go of the home button, press the power button 1 time. Keep not letting go of the home button for about 15 seconds, and the phone screen will display the Connect iTunes icon information to enter DFU mode.

5. The computer has a sound and text message to indicate that new hardware has been discovered, and iTunes has an iPhone that needs to be restored.

4.Once the installation is complete, open the Ilex Rat on your desktop.

It should be flashed.,But flashing can only brush to the latest version.。

The system parameters have been changed and cannot be restored.

Unless you backed up your original system, hehe.

It is impossible to restore the iPhone directly after jailbreaking, otherwise there will always be a small circle and then turn, and you can only take the recovery mode to flash and restore.

Flashing method in recovery mode:

1. Turn off your iPhone.

2. Press and hold the power on and off button and the home button at the same time after power off.

3. When the screen displays the white Apple logo, please release the power on and off button, and continue to hold the home button.

4. Turn on iTunes, and you will be prompted to perform DFU recovery mode.

5. Hold down Shift and click the Restore button at the same time to select the corresponding version of firmware and start flashing.

6. Wait for completion.

To factory reset your iPhone, go to Settings - General > Restore, and tap Restore items as needed.

The contents of the restored project are as follows:

1. [Reset All Settings] This operation can restore the settings of the iOS device to the default state of the current system version, but will not erase personal data.

2. [Erase All Content and Settings] This operation can erase all settings and personal data, and restore the iOS device to the factory state of the current system version. To avoid data loss, we recommend that you back up your data before performing the operation. Depending on your device, it may take a few minutes to completely erase your device.

3. [Reset Network Settings] This operation restores the network settings, which will clear the password and settings of the Wi-Fi network, cellular network settings, VPN and APN settings, and the device name on the About This Machine page. It is often used to solve problems with abnormal network usage.

4. [Restore Keyboard Dictionary] This operation can restore the keyboard dictionary to the default state of the current system version. It is usually used to solve input-related problems such as text input sorting anomalies.

5. [Restore Home Screen Layout] This operation can restore the desktop icon layout to the default state of the current system version, and dissolve all application folders created on the desktop.

6. [Restore Location and Privacy] This operation can restore all native and third-party applications that have obtained all permissions. Typically used to resolve malfunctions without reinstalling the app.

Note: If you have set a "Lock Screen" and "Restricted" password, you will be asked to verify the password before restoring.