There is no new station in the Zhongxing 6B satellite pot, and the Zhongxing 6C satellite cauldron i

It seems that the middle 6 is not on the new stage now.

The direction of the cauldron of Zhongxing-6C satellite is due south datum direction 0, the positive value is to the west, and the negative value is to the east。Connect the receiver with a closed line, the high frequency head is fixed on the feed tray of the pot, and the 0 scale mark of the high frequency head is approximately parallel to the ground. The sound of the receiver is connected to the TV, and a channel or frequency that is easier to receive is selected, such as Guizhou TV and China Education TV, and the signal quality is called up.

If the signal strength is above 60, the line is connected, otherwise there is a problem with the line or interface. The pot side is facing south, start to lower the elevation angle of the pot, and turn the pot to the east or west.

Satellite cauldron features:

It looks like a pot, consisting of a parabola and a feed and a high-frequency head located at the focal point of the parabola, and when the signal comes, it is reflected to the feed through the "pot" of the parabola, collected centrally and transmitted to the TV. Because the pot concentrates the signal, the signal strength is stronger and more stable than those simple antennas of the past.

Its appearance, in fact, is similar to some of our radio telescopes, the principle is also similar, we can think that the satellite pot is actually equivalent to a miniature radio telescope, but the signal received by the satellite pot mainly comes from the satellite.

Hello dear, I am glad to answer for you: the method of adjusting the Zhongxing 6B satellite cauldron is as follows; Step 1: Go online to find the local (accurate to the county) longitude, in the eastern hemisphere is how many degrees of east longitude, and use software to calculate the elevation angle and azimuth angle of the cauldron.

Step 2: Adjust the assembled cauldron to the elevation angle and fix it, roughly aligning it with the position of the middle star 6b in the sky, which is the east longitude above the equator. Step 3:

Use the feeder to connect the high-frequency head on the cauldron with the satellite TV set-top box. Turn on the TV and set-top box,Use the remote control to select the satellite received by the satellite TV set-top box as Zhongxing6b,Select the group of ** device with the strongest signal downlink parameters,Set it to save,Then press the "information" button,The TV screen will show what the signal quality is。 Step 4:

Fine-tune the azimuth, while adjusting the number of the signal quality bar displayed on the TV screen, after reaching the reception threshold, the signal quality bar will turn green, and you can see the TV screen at the same time. Step 5: Secure the cauldron to make sure it won't be blown crooked by the wind.

Hello, it is a pleasure to serve you and give you the following answers: The direction of the Zhongxing-6A satellite cauldron refers to the attitude control of the satellite itself, that is, pointing the satellite to the designated constellation. It plays an important role in satellite orbit control, fixed-point shooting of cameras and other instruments, and fixed-point transmission of transmitters.

Reasons for the problem:1The design of the satellite cauldron direction control system is unreasonable, or the crew is not operated properly, or the system fails due to the impact of the space environment; 2.

External interference, such as solar irradiation, electromagnetic interference, etc., will also affect the control of the direction of the satellite cauldron; 3.Faults within the satellite system, such as a controller failure, can also affect the control of the direction of the satellite cauldron. Workaround and Procedure Steps:

1.Firstly, through the monitoring data of the ground control room, it is determined whether there is a problem with the control of the direction of the satellite cauldron. 2.If there is a problem, it is necessary to adjust the direction of the satellite cauldron to ensure the normal operation of the satellite; 3.

If there is external interference or internal system failure, corresponding maintenance is required to ensure the control of the direction of the satellite cauldron; 4.If the unit is not operating properly, the cause should be carefully analyzed, and the unit operation skills should be strengthened through training and guidance to avoid the recurrence of such problems. Related Knowledge:

Satellite cauldron direction control is an important part of satellite operation, which refers to the attitude control of the satellite itself, that is, pointing the satellite to the designated constellation, so as to realize the functions of satellite orbit control, fixed-point shooting of cameras and other instruments, and fixed-point transmission of transmitters. Among them,

1.What is the Zhongxing-6B satellite cauldron.

Zhongxing-6B satellite cauldron is a kind of debugging method of communication satellites, also known as satellite cauldron debugging and hail. This method is to carry out a series of experimental tests and quality checks on the satellite after it is launched to ensure the normal operation of the satellite.

2.How to adjust the Zhongxing 6B satellite cauldron.

Normally, satellite debugging requires first establishing contact with a site on the ground, and then sending a series of test instructions to the satellite. These commands include system checks, data transmission tests, RF tests, and channel adjustments, among others. Based on the results of the tests, further optimization adjustments can be made to the satellite's systems.

3.The significance of the commissioning of the Zhongxing-6B satellite cauldron.

The commissioning of the satellite cauldron is an important step to ensure the normal operation of the satellite. Through a series of tests and quality checks on the satellite, the existing problems and defects can be effectively eliminated, and the quality and stability of the satellite's work can be ensured as much as possible.

4.Difficulties in the commissioning of the Zhongxing-6B satellite cauldron.

In the process of debugging the satellite cauldron, there are a variety of technical difficulties. For example, communication and data transmission between satellites and ground stations need to overcome weather influences, channel interference, and time differences. Testing and optimizing satellite systems requires specialized technical knowledge and rich experience.

5.Application field of Zhongxing-6B satellite cauldron.

Satellite cauldron debugging is an important communication satellite testing method, which can be applied to a variety of different satellite devices and communication networks. For example, radio and television satellites, agricultural satellites, earth resources satellites, environmental monitoring satellites and other fields.

6.The future development of the Zhongxing-6B satellite cauldron.

With the continuous development of satellite communication technology, the debugging of the satellite cauldron will also continue to be improved and perfected. In the future, the commissioning of the satellite cauldron will pay more attention to the concept of safety, stability and reliability, and play an increasingly important role in the field of satellite communication.

The assembled cauldron should be adjusted to the elevation angle and fixed, roughly aiming at the position of Zhongxing 6b in the sky, which is east longitude over the equator; Use the feeder to connect the high-frequency head on the cauldron with the *** set-top box, turn on the TV and the set-top box, and use the remote control to select the satellite received by the *** set-top box as Zhongxing 6b;

How to adjust the satellite cauldron of Zhongxing-6B?

Hello, I'm glad to answer for you, about how to tune the satellite cauldron in the satellite 6b? Information about your question: Adjust the elevation angle and fix the assembled cauldron to roughly align it with the position of Zhongxing 6b in the sky, which is east longitude over the equator; Use the feeder to connect the high-frequency head on the cauldron with the *** set-top box, turn on the TV and the set-top box, and use the remote control to select the satellite received by the *** set-top box as Zhongxing 6b;

Related information:Select the downlink parameters of the strongest group of ** devices,Set it to save,Then press the "information" button,The TV screen will show the quality of the signal; Fine-tune the azimuth angle, while adjusting the number of the signal quality bar displayed on the TV screen, after passing the receiving threshold, the signal quality bar will turn green, and the TV picture can be seen at the same time;

Now you can receive more than 80 Taichung Satellite 6B satellite systems are being upgraded, so you can see it for the time being, but it is estimated that it will not be able to watch it for a few days.

2.The connection line is incorrect. Please check it out.

3.There is a problem with the high-frequency head or receiver.

4.The program parameters entered are incorrect.

Check the wiring and interface to see if the position of the pot and the high-frequency head has moved, and readjust the pot.

Is there any signal quality, if not, the line is not connected, and the direction is not aligned! And see if the parameters are right.

And the signal strength shows that there is no problem with the machine, the pot is displaced, the signal strength is connected to the high-frequency head, and the signal quality is the reception Answer: local radio and television.

If the direction is right, it is a problem with the high-frequency head.