How can I remove the mobile custom shortcut menu in the Nokia 2610?

It's the move that is customized for you, of course, looking for him. Dial 10086, and then transfer to the manual answer "Press 0", and ask him to help you delete it. There will be no credit for this.

There shouldn't be a good way.,It's not troublesome enough to brush it again.,You should be able to rewrite the software.,But customer service will definitely not provide this kind of service to you.,Mobile companies won't.,It's not worth it to brush yourself!

Flash it. Brush it into the regular version.

Nothing else is acceptable.

Go to the after-sales brush.

It's free. Back up the data on your phone before you go.

It's like reinstalling a computer system. There is no other way .

Rewrite the software. Now you can't use a Unicom card. You can use a Unicom card or a mobile card in the future.

Flashing the machine, nothing else works.

Software management in the settings.

Brush. Go to customer service or find JS

The specific method needs to be connected to the mobile phone and the computer, and you can see that there is a hiddenfolder folder in the mobile phone with mmmb software, which has several folders, and what you need to do is to delete the cmcc folder and the serviceapplication folder and all the files in it. When deleting some files, MMMB may prompt that it cannot be deleted, restart the phone and try again, and you can delete it. After deleting these two folders, restart the phone, and you will find that the three shortcuts to the main menu are gone, and you're done!

There is no way.

Yours is a non-smartphone, unless you have a fee card, hehe.

Your one is a mobile custom version, you can go to the repair place to flash the machine, brush it into the normal version, and you're good to go! If you're not on the picture, don't waste the 20 dollars...

Activate Enhanced Full Rate to enable Full Speed Enhanced encoding mode, which improves voice quality but consumes power.

Cancels Enhanced Full Rate.

Activate Half-Rate The voice quality is reduced, but the battery life can be extended by about 30%, and network support is required.

Cancel the half-rate.

Phone serial number.

Check the phone version.

21*** number Call forwarding Cancel the transfer (sometimes transfer him to the mobile phone in arrears and the mobile phone number that is down, it's fun) Don't transfer what you don't need Because it costs money to connect!!

There are a couple more tricks.

Long press to turn on the phone to mute.

Navigation key + * to turn on the keypad lock.

Tricks for one-button dialing 1 Long press the number key 2 number key + transmit key.

You can check the start time and total call time.

Enter the settings, enter the shortcut settings, there is a left soft key is a shortcut, you will know when you enter!

Brush the machine and brush it into a normal version of 2610

Mobile customization has mobile treasure chests.

This is a problem with the network logo, and it is okay to use a transparent network logo. However, there is no guarantee that it will work.

There is a custom network logo at the bottom of the 3G network ** home page (currently only S40 is supported), and you can set the network logo content, font, and color. Just enter a space in the content box and you will not be able to display the word. Then click OK, and after exiting WAP, you will be prompted to receive the network mark.

There is a "network flag" in "Settings" - "Display Settings" - "Standby Mode Settings" (ps: As far as I know, not every number can use this function, you just try it.) ）

Nokia doesn't have this feature, so you can't cancel 1111

Go to the nokia2610 forum and take a look, I forgot, I also watched it on there, Zhongguancun.

Call 10086 to transfer to the manual station and she will show you the method and receive text messages.

Love app-wper【yinshuang07】 Answer for you:

Hello, quietly find the settings - shortcut to start and destroy the key settings.

If you have any questions, please ask, thank you!!

In "Settings", find "Configuration Settings", and then find Personal Settings in it. Go to "Personal Settings", select "Add", "Add", "Add "My Network", and then set "My Network" and "Account Name", whatever you want.

"Home" is set to the pages you go to frequently. "Username" and "Password" are not required.

Cancel the "Preferred Access Point" and then go to "Access Point Settings", start "**", "Address" Port "80", "Transmission Mode" "Packet Data", and then enter the Transmission Mode Settings.

Enter the packet data access point as CMWAP network type IPv4

In this way, the personal settings for surfing the Internet are set, and then added to the personal configuration"My access points"

Take the name by yourself, and then set the access point, transmission mode: packet data, Transmission mode setting: packet data access point: cmwap, network type: IPv4The rest doesn't move!

When setting up the access point by yourself, you must not set it to cmnet, this is not the setting of wap, it is the setting of www, and the access point of wap is cmwap !!

This is set, after saving, and then enter the "Configuration Settings", in the "Preset Configuration Settings", select the "Personal Configuration", select the "Preferred Access Point", select the one you set, and it's OK.

Nokia 2610 Mobile Internet Settings:

1. Select "Settings" in your phone - Network - Access Point Name (APN) - New APN

2. After entering the new page, you can fill in CMWAP for "Name" and cmwap for "APN".

3. Enter 10 0 0 172 for **, 80 for Port, and do not need to fill in for Username and Password.

4. "Server" can be filled in the **** of the operator. "MMSC", "MMS**", and "MMS Port" do not need to be specified.

5. Enter 460 for "MCC", 01 for "MNC", and do not need to fill in "Authentication Type".

6. Set "APN Type" to default, "APN Protocol" to IPv4, and "APN Roaming Protocol" to IPv4

7. After the setting is completed, you can use your mobile phone to surf the Internet.

The 3rd floor is the mobile setting method, and I helped you find it from Unicom.

Go to the Settings Data Connection menu Connection, description: www

Connector: WAP network.

Connect to: Internet

**Server::80

Type: http

Finish. (Note: This is used to go to www**).

Add Description: WAP

Connector: WAP network.

Connect to: Secure WAP network.

**Server::9201

Type: WAP

Finish. Press Done again.

Another note: This is used to go directly to the wap, and the direct wap is in the monthly subscription, don't **) again

In the past, the above settings can be omitted if you use mobile Internet access, and the key is the following two settings! Red is the point!

GPRS connection, click on the menu Add:

Description: Uniwap

Connect to: WAP network.

Access point: uniwap

Finish. Press Done again.

Now back to the main menu of the data connection, click on the menu Options:

My desktop is connected to: Secure WAP network.

Finish. Go to the main menu of Data Connections, and place the main menu "Secure WAP Connection" and"WAP connection", "Internet" connection is selected uniwap (if it is a mobile and China Unicom dual network, select automatic), press Done.

Borrow a mobile card to call 10086 Press 0 to select manual consultation The customer service will send you a text message, according to the above parameter settings.

The best way is to go to the Unicom business hall and find a beautiful woman at the front desk to help set it up.