PE single screw extruder 50 type price

The ** of single-screw extruder is about tens of thousands of yuan per unit, the cheap one is one or two thousand yuan, and the expensive one is one or two hundred thousand yuan. The first single screw extruder is affected by many aspects, such as brand, category, specification, market, etc. Before choosing to buy, it is necessary to understand and compare in many aspects.

The single-screw extruder is mainly used for extruding soft and hard PVC, polyethylene and other thermoplastics, and can process a variety of plastic products, such as blown film, extruded tube, pressing plate, drawn ribbon, etc., and can also be used for melt granulation. The plastic extruder has advanced design, high quality, good plasticization, low energy consumption, and adopts involute gear transmission, which has the characteristics of low noise, stable operation, large bearing capacity and long life. If you want to know more about the single screw extruder and **, you can consult the company, thank you!

Specifically, it should be distinguished according to the purpose and detailed configuration of the extruder.

Use: that is, what raw materials and what products are produced. This determines the design, structure and material of the screw.

Some special materials, such as fluoroplastics, need to be made of special steel, which costs nearly 400 yuan kilograms, while ordinary materials are only 8 yuan kilograms, which is a huge difference. Different materials determine the length-diameter ratio of the screw, some need 25, some need 35 or even longer. The raw material ** is much worse.

Configuration: that is, the brand and model of each component. For example, the model of the motor, AC or DC, and the size of the power. The components of the electrical control part are imported or domestic. ** There is also a huge difference.

In addition, sometimes even if the same configuration, factors such as quality, technology, service, and freight will also affect **. Therefore, it is recommended that you inquire with a professional manufacturer.

I bought a second-hand one last time for 8000 yuan.

Shuangxin Plastic Machinery Factory, Ziyang City, Sichuan Province.

Our factory specializes in the production of plastic extruders and supporting equipment, welcome to visit and guide!

Because the extruder is an assembly, it is composed of many parts. For example: screw barrel, reducer, drive motor, heater, temperature measuring element, hopper, control element (frequency converter or governor, temperature control module, various low-voltage electrical components) and so on.

And these parts are different brands, specifications and models, materials, etc., there will be price differences, and some of the price differences are very large. Therefore, when choosing an extruder, it is not only necessary to look at the first, but also to see the specific configuration and which parts are included, sometimes an inconspicuous small part (such as an imported pressure sensor) will cost thousands or even tens of thousands of yuan.

The ** of the accessories is very different, resulting in a large difference in the ** price of the extruder.

This mainly depends on what materials you produce, the products produced are different in different configurations, I am Zhangjiagang Huaming Machinery **** bought, the machinery is good, and it is not expensive, you may go to see it,

This depends on the specific configuration, such as what products, products, materials, thus affecting the motor power, aspect ratio, etc. Whether it includes drying, feeding, molding, etc. Final Impact**. Moreover, it is linked to the quality and service industry of each production equipment manufacturer.

For example, the ** of large factories can be between 18-250,000, while the ** of some small factories is very low, and 10-180,000 can be done.

The problem is a bit vague, but as for 120 30 just one host, it's still a bit of a change. Regardless of the size of the factory, the host of the same configuration, ** is about the same, the main big factories have good service and quality, and generally hovering between 18-220,000 (depending on the specific configuration, what products are used to produce, etc.).

Hello, jinxinluogan is happy to answer for you :

The screw diameter of the single-screw extruder used in the laboratory is not large, so the head is also small, and the infrared mobile heater is generally used, and the power is about 1500 watts; The temperature is regulated by the distance traveled. The fuselage is generally divided into four zones, each zone is composed of two upper and lower pieces, and the power of a single piece is about 1000 watts (there are also single pieces of 300-500 watts, and the diameter of the screw is less than 30). The temperature is automatically controlled by a thermostat.

Hope mine is helpful to you, hope, thank you!

Advantages: The single-screw extruder has a simple design and is cheap, so it is widely used in the mountains.

Disadvantages: 1) The material transportation of the single-screw extruder mainly relies on friction, which limits its feeding performance, and it is difficult to add powder, paste, glass tape stuffy glass fiber and inorganic filler.

2) When the head pressure is high, the counterflow increases, which reduces the productivity.

3) The material of the single-screw exhaust extruder has a small effect on the surface renewal of the exhaust area, so the exhaust effect is poor.

4) The single-screw extruder is not suitable for some processes, such as polymer coloring, thermosetting powder processing, etc.