What are the three major parts of a concrete mixer truck?

The three major parts of concrete mixer truck usually refer to hydraulic pump, hydraulic motor and reducer; The function of the hydraulic oil pump: to provide a steady stream of power for the hydraulic oil; The function of the hydraulic motor: the power of the hydraulic oil is converted into mechanical power and transmitted to the reducer; The role of the reducer:

Reduce the speed transmitted by the hydraulic motor. The three major pieces are the most expensive on the mixer truck when measured by configuration.

The three major parts of the concrete mixer truck are the reducer, the hydraulic pump and the hydraulic motor.

According to the moisture content of the concrete transported by the concrete mixer truck, there are three kinds of mixer trucks: wet material type, dry material type and semi-dry material type. Most of the wet material concrete mixer trucks are used in China, which can transport the concrete produced by the mixing plant (station) or the aggregate (sand, gravel), cement and water mixed according to the ratio, and in the process of transportation, the wet material is constantly slowly stirred to prevent the initial setting and segregation of concrete in the transportation process. However, the time from production to pouring of concrete generally cannot be exceeded, so as to avoid concrete solidification.

Therefore, in the case of longer distance transportation, dry and semi-dry material mixer trucks are used to transport. The dry material mixer truck can directly load the dry aggregate and cement into the mixing drum of the truck according to the proportion, and the dry material in the drum is mixed during transportation, when the vehicle is about to arrive at the construction site or add water to the construction site to complete the mixing of concrete. The aggregate and cement in the concrete transported by the semi-dry material mixer truck are also prepared according to the proportion, and contain a certain amount of water, but the water content does not meet the pouring requirements, and it is necessary to add water and stir at the construction site when the vehicle is about to reach the construction site or at the construction site.

Isuzu, Xiamen, and rich people can also buy Volvo.

Well, in fact, these brands of concrete mixer tankers on the market are OK, and it is reasonable for you to buy the following eight brands: Xingma, Zoomlion, Yate, and three.

1. Sinotruk, Shaanxi Automobile, Beiben, Liebherr.

The mixer tanker personally recommends Xingma and Sany, but it still depends on your location. For example, if you buy Yate in Tangshan, it's better to buy Beiben in Baotou, and the after-sales service is guaranteed.

Dongfeng's is good, the cost performance is very good, the old brand, trustworthy.

Concrete mixer truck chassis part and modified part.

Chassis part: Dongfeng Jiefang Shaanxi Automobile Heavy Duty Truck XCMG and other modification parts: generally look at the modification company is better, and the four major pieces of the concrete mixer truck should be matched, it is good, Hubei Omar special purpose vehicle **** specializing in the production of concrete mixer trucks, welcome to discuss.

Hello, I've kept you waiting, I'm glad for your question, the three major parts of the mixer truck refer to the main components of the mixer truck, including: engine, gearbox and reducer. 1.

Engine: The engine of the mixer truck is usually a diesel engine, and the power is generally between 150 300 horsepower, which is used to drive the rotation and driving of the mixer tank. The brand and model of the engine will vary according to different mixer truck manufacturers and models.

2.Gearbox: The gearbox of the mixer truck generally adopts a manual transmission or an automatic transmission, which is used to adjust the driving speed of the vehicle.

Manual transmissions generally use 6th or 8th gears, while automatic transmissions vary depending on the brand and model. The quality and performance of the gearbox are directly related to the driving stability and reliability of the mixer truck. 3.

Reduction such as speed detector: The reducer of the mixer truck is mainly used to reduce the speed of the engine output and increase the torque, and the slag brother eggplant can meet the needs of the rotation and driving of the mixing tank. Reducers are usually divided into two types:

Single-stage reducer and two-stage reducer. The torque transmission efficiency of the two-stage reducer is higher, but it is also more expensive.

Summary. It is composed of automobile chassis, mixing drum, transmission system, water supply device, full-power power take-off, front and rear brackets of mixing drum, reducer, hydraulic transmission system, feeding and discharging system, control mechanism and other parts. Due to technical bottlenecks, the four major pieces of domestic mixer truck tank volume of 3m -8m are used, and most of the four major pieces of domestic mixer truck with a volume of more than 8m are imported components.

The mixer truck is composed of: second-class chassis, transmission system, hydraulic system, frame, mixing tank, feeding and discharging device, water supply system, control system, human ladder and other parts. The front end of the mixing tank is connected with the reducer and is installed on the front of the frame, and the rear end is supported by two supporting rollers installed in the back of the frame through the raceway.

What are the four major pieces of concrete mixer truck.

It is composed of automobile chassis, mixing drum, transmission system, water supply device, full-power power take-off, front and rear brackets of mixing drum, reducer, hydraulic transmission system, feeding and discharging system, control mechanism and other parts. Due to technical bottlenecks, the four major pieces of domestic mixer truck tank volume of 3m -8m are used, and most of the four major pieces of domestic mixer truck with a volume of more than 8m are imported components.

The mixer truck is composed of: second-class chassis, transmission system, hydraulic system, frame, mixing tank, feeding and discharging device, water supply system, control system, human ladder and other parts. The front end of the mixing tank is connected with the reducer and is installed on the front of the frame, and the rear end is supported by two supporting rollers installed in the back of the frame through the raceway.

Hope it helps, dear.