How to decorate the house with dark lines, and how to put the line pipe when repairing the house wit

It is best to use copper wire, first in the wall and ground groove, and then or 4 square copper wire (according to the size of the electricity by a professional electrician wiring) into 16 or 20 pipes buried in the groove, with gypsum or cement fixing, these professional decorative electricians will do, the requirement is that the wire can not have a joint, such as the last line is not enough wiring to ensure that the connection is firm, insulating tape to be tightly wound. After the line in the line pipe is done, it should be guaranteed to be twitched to facilitate future maintenance. The wiring in the ceiling should be threaded with corrugated hoses.

All the wire boxes that are not used after the change should be sealed with plaster, the switches after the change should be temporarily lit, and the walls of the ground and kitchen and bathroom should be perforated in the future.

For large power consumption or valuables, the wire should be separately routed to the sub-household distribution box, and the air switch with leakage protection should be set separately. Such as a large number of air conditioners. All weak currents should ensure that there are no joints in the inner line of the pipe, and the activity can be repaired.

First of all, determine the location of the lamp socket switch that needs to be laid out and installed, and the main line can be arranged from the ground or from the ceiling.

Regardless of whether the branch is arranged from the ground and the ceiling, the line must lead from the ground and the ceiling to the socket switch on the wall;

Begin to install the buried box of the lamp socket and switch respectively, (of course, before installation, the position of the pipeline that needs to be buried from the ceiling or the ground to the wall is slotted) and then lay the line pipe according to the number of lines you need to determine the thickness, the general use of line pipe is: PVC16 pipe, 20 pipes, 25 pipes. When the laid line pipe can not be moved, it can be threaded; In general, it is possible to go to the switch from the position of the lamp, and (if the socket is not controlled separately) can also be threaded to the socket, etc.

Of course, the wire is made of multi-core copper wire, and the general civil use: the switch is squared; sockets are squared; The main line is 4 square (except for special requirements) The joint of the branch line connected to the main line must be tightened, can not be relaxed, and then wrapped with insulating tape, I hope it will help you.

Make a groove in the wall, thread the wires into the pipe and put it in the groove, and fill the groove. The pipe goes to the ground, depending on what floor you lay, if it is a laminate floor, the ground should also be grooved. Wait until the bricklayers, carpentry, and painting are all done before installing the lamps and panels.

Before the house is renovated, bury the thread in advance.

You should choose to install dark wires, because in this way you can make the home feel very tidy, and these wires will not affect the activities or walking of the family, and they are not easy to trip, and they are more beautiful.

Answer: In the eyes of the decoration master, the bright line and the dark line have their own advantages and disadvantages, the cost of the bright line is small, which is conducive to later maintenance and decoration, and the heat dissipation is easy to replace, and the only disadvantage is that the decoration effect is not good. Some old electricians don't see this as such. Because it is necessary to do a good workmanship, the topstitch is also very beautiful.

From a safety point of view, the clear installation of wires will not only increase the probability of direct contact with human electrocution after wire failure, but also the probability of damage. Sometimes the wire is pressed as soon as the table is pushed. Water gushed out of the quilt and the wires were flooded.

Dark wires need to be slotted, so construction is definitely more difficult than surface loading. Construction costs have increased. I just said it.

Extend the deadline, which is easy to understand; The technical requirements for notch depth, wiring direction and other technologies are not something that ordinary people can do. In the project, it is difficult to install wires in concealed works.

One of the differences between bright lines and dark lines: decoration is not only safe, but also makes the house look good, improve the grade, the line will not damage the wall if it is broken, the threading can be repaired, reduce unnecessary losses, and the construction is more convenient. Difference Between Bright and Dark Lines 2:

Many people believe that the installation of dark lines is first of all troublesome in construction and has high labor costs, and secondly, there are half more dark lines than bright lines. Is that really the case? This seems to come as a surprise to many, and here I can give you a calculation of the economic accounts.

In other words, the cost of concealed wires is mainly the construction cost. But it is clear that installing wires is the cost of building materials. Bright wires require the use of BVVB or RVV wires, which are much more expensive than BV wires and BVR wires.

Many people say that the wires are safe, easy to maintain, and cost-saving! In fact, many people choose a nameplate when installing electricity, and if it is simple, fast, and open-wired, it is easy to find faults and also help to cool the wires. If you choose a dark wire, the wire will be damaged and it will be troublesome to repair.

However, the life of the open wire is not longer than that of the dark wire, which excludes the possibility of human damage, and the natural aging of the wire is faster, and the open wire is faster. This is because the air flow on the surface of the wire is rapid, the temperature changes significantly, and the aging speed of the line is accelerated. In general, if the life of the concealed front is 10 years, then the surface-mounted front will not exceed 7 years.

On the contrary, wires are discreetly laid in the walls and floors, which can effectively prevent damage from foreign bodies.

Some people will definitely say: after the wire walks in the dark line, the wire is aging, and it will be more troublesome to replace, but there is still a solution. Currently, the standard for the acceptance of water and electricity is that the wires buried in the wall wiring must be able to pull.

And the probability of problems with dark lines is still very low, so this problem will not happen too much, dark lines can not be seen from the outside, have no impact on other designs in the room, have a good decorative effect, and can improve the overall fashion sense of the space. But if a dark line is placed in a rural home, a problem arises. That is, the beams in the village are generally much higher, and it is more difficult to chisel out the notches.

Therefore, insiders say that considering the safety angle and aesthetics of electricity, it is best to set up wires with dark wires.

Of course, you choose to take the dark line, because if you take the bright line, it will not only be more dangerous, but also not beautiful.

Dark lines should be installed, because the installation of dark lines is the best-looking, and the environment is particularly beautiful, which is particularly reasonable, so dark wires should be installed.

The dark wire means: the strong and weak wires buried in the ** slot are generally wrapped in the wire pipe. The rules for the use of strong electricity are: square millimeter insulated copper wire with cross-section square for lighting wires; Ordinary sockets are insulated copper wires with cross-section square millimeters; The air conditioning line should reach 4 square meters, otherwise when using the air conditioner, it is easy to overheat and soften.

It is best to use cooked glue wire, which has strong corrosion resistance. Generally, 4 points of PVC pipe can be used for wire pipes. Places to pay attention to the dark line of the courtyard decoration:

The dark wire is to install the wire in a concealed way, so that it must be insulated, and the wire should be larger to pay attention to the construction drawing of the line, it is best to use PVC pipe sleeve, the dark wire is best to use a good brand of copper core wire, the light line is used, the socket is used 4mm, the power supply is used 6mm, and the details refer to the 2nd floor. Pay attention to heavy walls and don't play too many trunkings. The wet place should be waterproof, and the wiring place must be wrapped with PVC tape and then wrapped with insulating tape.

There are too many of them, so let's find a professional electrician to do it for you. Pay attention to safety, the antenna should be grounded, there should be a leakage protector from the main electrical box to the house, and a small electric box should be installed in the house after entering the house (as for how many are installed depends on yourself). Generally, one lighting, one socket, one high-power electrical appliances such as air conditioners are best, and one is left for backup.

The installation of our household electricity in the way of open lines is mainly convenient and fast construction, because unlike the concealed installation of water and electricity, which need to do cumbersome processes such as wall slotting and pipe layout, and the installation of open lines is generally carried out in the middle of the wall decoration or after completion, and the circuit layout is equivalent to the last process of hard installation. The installation of household electricity in the way of open lines is very common in our self-built houses, and the people are trying to save worry and effort, as long as they meet the demand for electricity and safety issues, and the rest are not too careful!

Of course, it is difficult to form a bright line into a dark line, but it can be realized, but the cost is not much lower than that of the dark line.

First of all, the main line of the line, the circuit, the double control, etc. must use the corner of the top surface, after all the lines are arranged, the back painter uses the gypsum line to block, because the gypsum line is empty space, the number of line groups is too much, basically can not be covered, then the ceiling must be suspended, if the position of the ceiling itself is designed to be well handled, if there is no part of the design ceiling treatment, the difficulty is reflected, then the method of winding must be taken, so that the cost will increase, time-consuming and laborious, thankless.

Secondly, in order to achieve the effect of bright line to dark line, it is necessary to combine dark line and bright line, that is, the wall part must be slotted and embedded, because some special positions of bright line can not be processed, even if it is processed, it is also thankless, which not only affects the appearance, but also is not convenient for later collocation and use, such as the position of the TV wall, the position of the head of the bed, etc.

Again, the bright line to achieve the effect of the dark line, affect the later maintenance, if there is a line failure, the later maintenance cost is too high to cut quite troublesome, so the treatment is not impossible, nor can it be reached, can be achieved, but the problem is that the cost is high, the later maintenance is difficult, the safety hazards are great, it is not recommended to adopt, not to mention some construction. Really good plan, it is recommended to use live wire treatment, even if the line fails in the future, it is easy to replace, will not affect life, and the cost is relatively low, so it is recommended that home decoration is best used live wire treatment, so that you can rest assured that you can decorate and live with peace of mind.

You should buy some white threads, and they should also be covered with cabinets, and they should also be covered with a layer of wallpaper, so that you can get out of the dark line and look good.

The dark line is safe, durable, and more beautiful than the bright line. Topstitches are unsafe, easily damaged, and unsightly. Conclusion:

The dark line is good. Each has its own merits. The dark line is beautiful, but it is more complicated to install, and once there is a problem, the wall has to be chiseled for repair, which is more troublesome.

The open wire is relatively simple to install, and it is also more convenient to repair and modify, but it is exposed to the outside and the oxidation is more severe. Nowadays, it is generally a dark line, which is also a trend. Combination of light and dark.

That is, take the surface-mounted line, the horizontal line nail trunking (the top corner of the trunking is replaced by the corner trunking), and then the downward switch socket line to dig the wall and slotted concealed, so that it combines the advantages of surface-mounted and concealed, simple, economical, safe, beautiful, easy to overhaul, and after a few years, the fine decoration can also be changed without removing and reloading. It depends on the situation. There is also their own mood, if you like the bright line on the bright line, sometimes crisscrossing is also an art, sometimes someone likes to be quiet then use the dark line, again, the wiring depends on the situation, some must be the bright line, some must use the dark line, because their function and environment are different now.

You can cover the bright lines with decorations, so that you can't see it, and it will also look particularly beautiful, and many people choose to do this.

Summary. 1.Lighting wires in your home.

Lighting wires are squared. Generally, the power of the home lighting load is not too large, and there are almost 6-8 lamps in the dining room, living room, main and secondary bedrooms, balconies, kitchens, and bathrooms, which are controlled within 1500 watts, and the square national standard copper wire is enough.

What specifications of wires are good to use to decorate the house to make dark wires.

1.Lighting wires in the home Lighting wires use squares. Generally, the power of the home lighting load is not too large, the dining room is bent and slippery, the living room, the main and secondary bedrooms, the balcony, the kitchen, and the bathroom are almost 6-8 lights, and the Sila is controlled within 1500 watts, and the square national standard copper wire is enough.

What model did you use?

What does it mean to multiply 2?

Is it okay for PVR to be used as a lamp and socket?

Yes, ha. I want a wire that lasts a long time.

2*:2 indicates the number of cores and the cross-sectional area of the cores. That's right.

When many people decorate at home, they will be entangled because of the installation of wires, and they don't know whether it is better to install bright wires or dark wires. Everyone thinks that if you install a bright line, it will affect the appearance very much, but if you install a dark line, it is very easy to break, and it is not easy to repair. Today, I will tell you about whether you should take the bright line or the dark line when decorating the room?

When decorating, if you install a bright line, the cost of decoration is relatively low, and there is no need to slot and pre-buried pipes, if you understand the circuit, you can install it yourself. The open wire is also very convenient to repair, if there is a circuit failure, it is easy to find the problem point, and it can be replaced in time. Moreover, the line of the open line is very easy to change, and if the decoration style of the home is changed, it is obviously very easy to change the line.

However, obviously exposed to air and sunlight and moisture for a long time, the aging will be very fast, so it is very easy to short-circuit, and the bright line is exposed to the outside is particularly easy to be bitten by rats or insects, and it is easy to short-circuit, and the exposed outside of the bright line particularly affects the overall appearance of the room, if you accidentally touch it, there may be potential safety hazards.

When the dark line is installed at home, you can't see any line after installation, and the wall looks very neat and beautiful, because the dark line is buried in the wall, and there is the protection of PVC pipe, and the life of use is relatively long. Because the dark line will not be exposed to the air, it will not be easy for the elderly and children at home to touch, and the safety performance is very high. However, the design requirements of the dark line are very strict, so the installation is particularly time-consuming and laborious, more difficult, and the cost is relatively high.

If the dark line is broken, it is very troublesome to repair, and the difficulty and cost of repairing the line fault are also very high. If you install a dark wire at home, it will be very troublesome to replace the circuit in the future.

Nowadays, most homes are installed with dark lines, because they feel that the bright lines are not beautiful and safe, and the protective materials of the dark lines are generally very good and not easy to break. But what kind of installation you want depends on your preferences and family situation.