Where is the password for setting broadband in a TK router?

1.Open the browser, enter in the address bar is generally to enter this, some routers may be different, this address is written at the bottom of the router).

2.Enter the router settings, if it has not been modified, it should be admin.

3.In the settings bar on the left, find Network Parameters, and click on the WAN port settings. On the right side there is the PPPoE connection account name, and the password cannot be displayed here.

Please refer to the manual for login, and the account number and password are provided by the broadband operator.

1. Open the browser and enter the router address. The setting address of a wireless router is generally "or." Of course, some routers use other private addresses as the login address of the router.

2. Enter the login name and password, select Wireless Settings - Wireless Security Settings, select WPA-PSK WPA2-PSK to change the PSK password, and restart it.

3. Some routers will use the installation wizard CD to guide the setup of the router, and some use software or mobile app to set up. It is recommended that you read the manual and installation guide before installing and setting up the router.

The initial password should be admin

If you can't enter it in the browser, you can enter the login interface, enter the account password, there is a route on the back, go in and run the wizard, and follow the prompts step by step!!

678 is the line, and 691 is the account password.

Step 2: Unplug the network cable you used to connect the cat to the computer and plug it into the WAN port of the router, and plug the other end into the cat. Take another network cable and plug it into any port of 1234, and plug the other end into the computer.

Step 3: At this time, you will enter the router in the address bar of the computer with the broadband ** (usually written below the router) I will take TP-Link here as an example: find the setup wizard after entering**.

Then the next step is to get the small dot to the first one, it seems to be called the top peooe, I can't remember exactly. Then the next step, type your home broadband account password and then the next step, click Done, and finally wait for the router to restart. Let's see if you can go online.

If you still can't, then reset the cat and the router, press the small black dot with a pencil for about 10 seconds, and see that the lights are all off and on again. Try it again with the method above! See if IE can't open a few more hits, if it's still not good, then clear the IE's temporary files.

Hope it helps...

Look at the IP address of your router, then hit the IP address on IE, select PPPoE Settings and enter the telecom account number.

Go and see it, it will be more detailed

Internet account and parameter settings.

1. Enter cotton in the browser, and then press the enter key to open the landing page.

2. Enter the default management account: admin, password: admin (or empty password).

3. Click "Setup Wizard" on the left.

4. Click "Next" to set up step 1.

5. Enter the "old password" once - >new password" - >confirm the new password" - >Next".

6. Enter the Internet account and password provided by the broadband operator, and then click "Next".

7. Set up Wi-Fi: Fill in the "Wi-Fi ID" (that is, the name of Wi-Fi) - >WEP security mode" is recommended to select WPA or WPA2 - > fill in the "password" (the verification password of Wi-Fi connection) - > click "Next".

8. Click "Reactivate" to make the settings take effect.

The computer is directly connected to the router.

Behind the router is the IP address of the router and the account and password of the router.

Open the Internet Explorer browser and enter the IP address of the router settings to set up the router.

Enter the router's settings interface, and set the broadband account and password provided by the broadband operator according to the setup wizard, so that the router can automatically dial up to connect to the network. Set the wifi password in the wireless security, save it and restart the router.

Log in to the router and use the router's "Backup Profile" function to export the router's configuration to your computer.

Open the RouterPassView router password viewer, click "File" and then "Open Router Profile".

Open the configuration file that you just backed up, click "" and then click "Select All" to copy all the text and paste it into Notepad.

Finally, press "Ctrl+F" or click "", then click "Find", enter "password" to search, and you will soon find the PPPOE dial-up account and password.

First of all, log in to the router and use the router's "backup profile" function to export the router's configuration to the computer, which is basically available on all routers. The configuration must contain the PPPoE dial-up account password.,In fact, the wifi password and the router account password are available.。

Open the routerPassView router password viewing tool and click "File" ->Open Router Profile".

Open the configuration file that you just backed up.

Click "-Select All", then copy all the text and paste it into Notepad, which has a "Find" function. If it's too troublesome, then slowly "flip" here! Hard work pays off, and you can always find it.

Press "Ctrl+F" or click "-Find", enter "password" to search, and you will soon be able to find the PPPOE dial-up account and password.

I forgot the wifi password of my wireless router, just change it.

Connect your computer to any LAN port of the router, enter the settings page, and set and change the WiFi name (SSID) and password of the router.

The method is as follows: 1. Open the browser and enter the IP address of the router gateway in the address bar (there is a label on the back of the router, generally, enter the login username and password (generally admin);

2. After successful login, the running status will be displayed, click "Wireless Settings";

3. Click "Wireless Security Settings" again, and the wireless network name (SSID) is a name, which can be filled in casually, generally letters + numbers;

4. Then set the password, generally choose the WPA-PSK WPA2-PSK encryption method (the password should be 8-16, and the alphanumeric combination can be used);

5. After setting the password, click Save to prompt restart;

6. Click "Restart Router" in "System Tools" to restart the router.

Enter the address of the router in the browser, which is usually marked on the back of the router.

Enter the username and password, depending on the router, the password will vary, most of the default username and password are admin.

Enter the router management interface, find the "Profile" option and turn it on.

Save the configuration file to your desktop.

Open the configuration file with Notepad to find the PPPoE

Behind the PPPoE is the broadband account password saved by the router for local Internet access.

Then go in or enter the login password, admin or 123456

Go in, and the broadband account password will be displayed, and the general broadband account password is the same, and the account password that has been sung for 8 digits is the last 6 digits.

According to the information you provide, you can inquire about the broadband account in the mobile phone business hall service broadband, and the same path to "retrieve the Internet password".

Here's how to set up your router password and account:

1.First connect the router with a computer, enter it in the browser address bar, depending on the router, it may also be; etc., generally there will be a record on the back of the router).

2.Enter the login password (usually the initial password is admin, you can also look at the back of the router, this information will generally be recorded), and click "".

3.Click on "Advanced Settings".

4.Find "Device Management" and click "Change Login Password".

5.After entering the relevant information, click "Save" to set the wireless router password.

Extended information: A router is a device that connects various local area networks and wide area networks on the Internet, and it will automatically select and set routes according to the situation of the channel, and send signals in the order of the best path. A router is the hub of the Internet"Traffic police"。At present, routers have been widely used in all walks of life, and various products of different grades have become the main force to realize the internal connection of various backbone networks, the interconnection between backbone networks, and the interconnection between backbone networks and the Internet.

The main difference between routing and switching is that the switch takes place at the second layer of the OSI reference model (data link layer), while the routing takes place at the third layer, which is the network layer. This difference determines that routers and switches need to use different control information in the process of moving information, so the way they achieve their respective functions is different.

A router, also known as a gateway, is used to connect multiple logically separated networks, and the so-called logical network represents a single network or a subnet. When data is transferred from one subnet to another, it can be done through the router's routing function.

Start by logging in to the router settings home page in general OR General.

If you don't know how to set it, you can use the setup wizard to complete it.

You can also find the network parameters WAN settings, select the PPPoe method, enter the username and password, and save it.

Isn't there a setup wizard for the router to go in?,Select pppoe,Just enter the account password.,It's very simple.。

In the WAN port settings of the router, select PPPoE as the connection type, and fill in your account and password in the Internet account and password to save it.

Enter the management system and follow the prompts to set it up, it's very simple.

The router comes with an instruction manual, which has detailed operating instructions, which is very simple.

Browser Input: Set up.

First, open the browser and enter the ** of the router to enter the router settings interface. Then enter the router account and password to log in. (The account and password can be found from the bottom of the router).

2. Then, select "Backup & Onboarding Settings" from the menu on the left side of the admin interface, and then select "Backup Profile" on the right.

3. Then select the path where you want to save the backup file and click OK.

5. Then select Open File in "RouterPassView" and select the backup file you just wanted.

6. Then select the backup file and select below to open.

7. Then, you can view the account and password of the broadband, and the problem is solved.

1. Enter the router.

Open the browser - enter the general router address is this or check the login information on the back of the router) enter the route - enter the user name, password, (the default is generally admin).

2. In [Network Parameters] --WAN Settings], the Internet password is the dialed password (the password is hidden, and it needs to be viewed through the source code of the password form or backup configuration file).

You cannot see the real password on the route configuration page. Unless you have a password to view the period of stuff. And that's more troublesome. If you don't remember the password. You can ask the customer service of the company where you installed the broadband for help. You can request a password change.

Look carefully inside that setting

You need to go to the router management page.

2. Enter the username and password on the back of the router in the web dialog box.

3. Enter the router management page.

4. Click the Setup Wizard, check PPPoe in the dialog box, and then enter the username and password provided by the operator.

Generally, in the WAN port settings, there is an access method, select PPPoe, there are Internet accounts and passwords below, fill in the broadband account and password respectively, and finally save it!

Click on the setup wizard or click on the WAN port setting.

According to the information you provide, you can inquire about the broadband account in the mobile phone business hall service broadband, and the same path to "retrieve the Internet password".

How to view the password of the broadband account on the wireless router:

1.The system is connected to the router.

Turn on the wifi of the computer, search for the default wifi name of the router (the nameplate on the back of the router is written), and connect to the wifi network. The first time you use the router, you generally don't need to enter the wifi password.

2.Go to the gateway page.

Open a computer browser and enter the gateway IP address of the nameplate on the back of the router (generally, enter the gateway configuration interface.

3.Go to the WAN port settings in Advanced settings.

You can view the broadband Internet account and password.

How do I know my broadband account password?

Log in to the routing management interface, you can see the broadband account number in the WAN port settings, but the password is dotted, you can't see it, if you want to know the broadband account and password, then you can only call the network provider** to consult.