There are many types of cabinet materials Which cabinet is the best

Now there are many cabinet styles on the market, cabinets of different materials have their own advantages and disadvantages, cabinet materials are common fireproof board, melamine veneer type, paint board, crystal door panel, PVC board, solid wood door panel, etc., so how to choose cabinet materials? What material is good for cabinets:

Cabinet material 1, fireproof board.

It is made of multi-layer kraft paper impregnated with phenolic gum and a layer of melamine-impregnated decorative paper pressed under high temperature and high pressure, and the fireproof board is cold-pressed or hot-pressed on the MDF or particleboard as a cabinet door panel. Generally, the wear-resistant, scratch-resistant, high-temperature and other properties of fireproof board are better than those of melamine board. The fireproof board is brightly colored and gives people a new feeling.

However, the fireproof board countertop is easy to be eroded by water and moisture, and improper use will lead to degumming, deformation, substrate expansion and other consequences.

Cabinet material 2, melamine veneer.

Melamine board is made of melamine on the surface of particleboard or MDF laminate laminate, and its extended variety is wrapped with metal frame at the edge. Similar to fireproof board, it has the properties of friction resistance, impact resistance, high temperature resistance, heat resistance and heat resistance. The laminate has a variety of colors and textures that imitate nature, but there is no three-dimensional modeling, and the metal edge banding and aluminum alloy groove handle only increase its decoration, and there is not much effect from the practical effect.

Cabinet material 3, paint board.

Paint boards are divided into baking paint and polyester paint. Baking paint is composed of resin and additives, which can be sanded and polished. Polyester paint is painted without baking, and the surface is matte without polishing, focusing on firmness and adhesion.

Good polyester paint comes off in powder form, while ordinary pieces come off in pieces.

Cabinet material 4, crystal plate.

The crystal plate is pasted with plexiglass plate after painting on the surface of the board, due to its wrapping, edge sealing, trimming and other processes completely by manual operation, plus the characteristics of plexiglass itself, there are many shortcomings.

Cabinet material 5, PVC board.

VC board is made of PVC on the surface of the substrate by vacuum pumping, which can have three-dimensional modeling, due to the overall coating, waterproof and moisture-proof performance is good, and there are a variety of colors and textures to choose from. However, the surface is easy to be scratched and bruised, and it is not resistant to high temperatures. In addition, PVC is prone to deformation due to the fact that the moisture of the glue will soak into the substrate during the gluing process.

Cabinet material 6, solid wood board.

Solid wood boards are divided into pure solid wood boards, solid wood plywood, and solid wood veneer. Pure solid wood board has high requirements for the consistency of wood species, the whole is natural, luxurious and classic, and the effect is good; Solid wood plywood is based on solid wood splicing material, and the surface is pasted with solid wood veneer, which can achieve the visual effect of solid wood; Solid wood veneer is a double veneer on the surface of MDF. Solid wood plywood and solid wood veneer can avoid the color difference and defects of the surface raw materials, achieve consistent texture and color effect, and are not easy to deform.

The worst cabinet is particle board, but the mainstream ones are all using this, especially the finished product.

In fact, it is an ecological board.

Preferably, of course, it is solid wood. But it's 2,3000 per meter.

Nowadays, more and more people choose custom cabinets, so which custom cabinets are better? Nowadays, there are many kinds of cabinet products on the market, what materials can we choose when customizing cabinets? Next, I will briefly introduce to you which custom cabinets are good and what materials are made of cabinets.

First, which cabinet is better.

1. Zhibang cabinets.

Founded in 1998, Zhibangcheng is a well-known cabinet enterprise in China, after years of development, the company occupies a leading position in the domestic cabinet industry. The company cooperates with more than 20 world-renowned first-class businessmen such as Blum to introduce advanced production lines from Germany, and its products have passed the certification of international management system for quality and environment. The company has also won many honors such as China's well-known trademark and cabinet design gold award.

2. Gold medal cabinet.

Founded in 1999, Gold Medal Cabinet is a modern enterprise focusing on high-end cabinets. The company has a strong strength, with a domestic leading cabinet production base, a national kitchen design center, its products have passed a number of authoritative certifications such as the Ten Ring Certification, and the products are exported to the United Kingdom, Canada and other countries and regions. The company has also won many honors such as the Special Award for Chinese Kitchen Cabinet Technology and the Gold Award for Customer Service Satisfaction.

3. Simi cabinets.

Founded in 1934, Simi Cabinet is a well-known cabinet brand in France, occupying a leading position in the European cabinet industry. Its products have passed a number of authoritative certifications such as PEFC forest certification and ISO certification. The company has also won the honor of good brand of China building materials.

1. What are the materials of the cabinets?

1. Solid wood material.

The cabinet made of solid wood is a more common cabinet, it is a high-end environmentally friendly cabinet product, its hardness is relatively hard, with the advantages of scratch resistance, wear resistance, beautiful appearance, uniform color. However, the cabinet made of solid wood is more expensive, and its fireproof and flame retardant effect is not very good.

2. Stainless steel material.

The stainless steel cabinet looks fashionable and generous, there will be no cracking and other problems, and it has high environmental performance, with the advantages of fire prevention, moisture resistance, high temperature resistance, easy to clean, etc., but the stainless steel cabinet is prone to oxidation and other problems.

3. Plexiglass material.

After special treatment, the impact resistance of plexiglass is 16 times that of ordinary glass, and it has the advantages of insulation, wear resistance, stain resistance, flame retardant, etc., but the cabinet made of plexiglass is prone to scratches and can not be exposed to high-temperature items for a long time.

Now few people will generally choose brick cabinets, most of them are custom cabinets, custom cabinets have many aspects to pay attention to, cabinets are more complex than other cabinets, involving a wide range of material choices, today I will summarize some tips for custom cabinets, I don't know how to choose cabinets, let's take a look. But how do you choose the materials for your custom cabinets? Many types of wood are suitable for cabinetry.

How to choose a cabinet?

<> pure solid wood, solid wood planks are planks made using intact timber (logs), but **expensive. As long as solid wood is chosen as a cabinet, there will be different degrees of deformation, which is the characteristic of solid wood. Under the influence of air humidity, solid wood will crack or deform with the change of air humidity.

The biggest problem with solid wood is that it requires regular maintenance. Solid wood particleboard, solid wood particleboard is not solid wood! It is another name for particleboard and is made from pieces of wood.

It can be replaced with branches instead of cutting down the whole tree, which is more environmentally friendly.

Solid wood particle board is a wood-based panel made of wood chips and resin. Compared to intact solid wood, wood fragments lose their natural pull and are not easily deformed. No matter what kind of board is used, glue is used in the manufacturing process, so the molded plate will release free formaldehyde, but it is harmless to the human body at a certain concentration.

According to the national standard, MDF can be divided into E0, E1 and E2 grades according to the amount of free formaldehyde released. The formaldehyde emission of E0 grade is mg L, E1 grade is mg L, and E2 grade is 5mg L. According to the regulations, the environmental protection level of indoor panels has reached E1 level, which meets the indoor use standard.

While confirming the quality of the panels, the most important thing to pay attention to is the formaldehyde emission of the furniture used in the panels.

If you want to save, then choose multi-layer solid wood materials for the cabinet. Although multi-layer solid wood is not as moisture-resistant as solid wood, it is much stronger than particleboard, so multi-layer solid wood body is also recommended. How to choose materials for custom cabinetry?

The effect of each material cabinet will be different, the degree of durability, quality, etc. will be different. When you buy cabinets, you should choose based on your needs. How to choose a cabinet?

It is recommended that you look at different types of cabinets when buying them to ensure that the cabinets we buy meet the needs of use.

Normally, the materials of cabinets are brick cabinets, stainless steel cabinets and wooden cabinets, and some more durable and moisture-proof materials should be selected when choosing them.

Particle board, wood board, waterproof board, aluminum alloy plate, etc., should be waterproof and easy to take care of.

There are many materials for cabinets, such as pine, willow, and mahogany. This is mainly based on one's own financial conditions as well as personal preferences.

1. Solid wood door panels.

There are two kinds, one is made of multiple pieces of solid wood, and the other is MDF (density board) surface pasted with solid veneer.

Advantages: advocating nature, noble, luxurious, environmental protection.

Disadvantages: The paint on the surface is easy to scratch, the maintenance is difficult, and the change of temperature and humidity is easy to deform and crack the solid wood.

2. Blister door panel.

The substrate is made of 18mm thick high-density board, which is a kind of decorative plate formed by molding the PVC film on the surface of the substrate at a high temperature of about 170 meters after processing, cutting and milling into various shapes.

Advantages: rich color, unique shape, strong three-dimensional sense of pattern, easy to scrub, no static electricity when scrubbing, not easy to adhere to dust, scratch resistance. Because the four sides of the door panel can be sealed into one after blistering, there is no need for edge sealing, which can reduce the opportunity of moisture and dirt, and solves the problem of black edge that may occur after a long time of edge sealing.

Disadvantages: high requirements for the manufacturer's machinery and equipment and production technology.

3. Paint the door panel.

After painting in MDF (MDF), the door panels are treated by heating and drying in the oven.

Pros: Colorful, shiny, smooth.

Disadvantages: many processes, long processing time, easy to scratch the surface, short gloss retention time, after a period of use, it will oxidize with the air and change color, there will be color difference when redone, and toxic substances will be released due to the large use of paint in the production process.

4. Fireproof board door panel.

Paste various brands of fireproof rubber board on the plywood or MDF.

Advantages: fireproof board is rich in color, scratch resistant, economical and beautiful, and more practical.

Disadvantages: The door panel is flat and needs to be edge-banded, which cannot create three-dimensional effects such as concave and convex, metal, etc., and has a poor sense of fashion.

5. Melamine veneer.

Paste melamine paper on particleboard or MDF.

Advantages: rich color, scratch resistant, economical and beautiful, more practical.

Disadvantages: The door panel is flat and needs to be edge-banded, which cannot create three-dimensional effects such as concave and convex, metal, etc., and has a poor sense of fashion.

6. Stainless steel door panel.

The mold is formed and argon welded with cuts, embossed, electrolyzed, and filled with PU or splint in the middle of the door.

Advantages: bright, clean, fireproof, easy to clean, with a typical metal fashion sense.

Disadvantages: single color, there will be obvious concave and convex after injury.

7. Crystal panel door panel.

Plexiglass is used as the surface layer to paste on the MDF, and the edges are sealed on all sides.

Pros: Colorful, smooth, easy to clean.

Disadvantages: The surface layer is easy to fall off, affecting the appearance, the surface is easy to scratch, oxidation and discoloration will occur in the air at room temperature, and the gloss is maintained for a short time.