What to wipe the phone screen with, what to wipe the phone screen with

1. Use the glasses cloth or the wiping cloth that comes with the screen sticker to wipe the screen clean (the purpose of using the glasses cloth is not to lose hair). The four corners of the screen are the most difficult to wipe, and the way to wipe the four corners is to wrap the glasses cloth on something sharp (such as a toothpick), so that it can be easily wiped to the four corners without hurting the screen. Wipe it onto the top of the screen and leave as little dust as possible.

The following section is the most critical.

Second, it is impossible to wipe the screen without leaving dust, and the dust in the air will also fall on the screen at any time, so the following steps are very important.

1.Use a balloon (medical ear washer) to blow the screen clean.

2.Some dust sticks firmly and cannot be blown off, and the further way to remove it is:

Removing the top layer of the three layers, gluing it to the screen and then tearing it off, this step is to glue off the unwiped dust on the screen, which is very effective.

Three, the last is the film: remove the top part of the first layer of the screen sticker, about one-fifth, not too much. Align the uncovered screen sticker to the edge of the screen, slowly press down with two fingers while uncovering, and play the purpose of driving away the bubbles while sticking, and scrape it with cardboard (especially the four corners) after pasting.

The film pasted by the above method has no dust and bubbles, which is especially suitable for mobile phones like i718+, which have strict requirements for film. It can be pasted in two minutes after proficiency.

Wipe it with the glasses cloth of resin glasses and it works great!! ~

The flannel cloth is good to wipe, and the cloth for wiping glasses is fine.

With a dust-free cloth + n-heptane = very bright!

1. It is better to wipe the mobile phone screen with LCD cleaner.

2. The liquid crystal cleaner should meet the following conditions: it does not contain any substances that may damage the LCD screen, it is colorless and odorless, the appearance has no color, the chemical properties are relatively stable, it is not volatile and volatile, and it is dissolved in water.

3. There is a certain limit on the ion content in the solvent. The use method is scientific, and the product shall not be sprayed directly on the screen. The product should pass the LCD production line test and have the qualification to be used in the LCD production line.

4. The most important thing is that there is no corrosive effect on electronic products, because this product is used in IT products, and you must not use a cloth and paper towel to wipe the LCD screen, because as long as there are a little small particles, it may damage the protective film of the liquid crystal.

1. It is better to wipe the mobile phone screen with LCD cleaner.

2. The air liquid crystal cleaner should meet the following conditions: it does not contain any substances that may damage the LCD screen, it is colorless and odorless, the appearance has no color, the chemical properties are relatively stable, it is not volatile, and it is dissolved in water.

3. There is a certain limit on the ion content in the solvent. The use method is scientific, and the product shall not be sprayed directly on the screen. The product should pass the test of the spike crystal production line in the liquid hopper and have the qualification to be used in the jujube liquid crystal production line.

4. The most important thing is that there is no corrosive effect on electronic products, because this product is used in IT products, and you must not use cloth and paper towels to wipe the LCD screen, because as long as there are a little small particles, it may damage the protective film of the LCD.

1. It is better to wipe the mobile phone screen with a rotten and collapse-resistant LCD cleaner.

2. The liquid crystal cleaner should meet the following conditions: it does not contain any substances that may damage the LCD screen, it is colorless and odorless, the appearance has no color, the chemical properties are relatively stable, it is not volatile, and it is dissolved in water.

3. There is a certain limit on the ion content in the solvent. The use method is scientific, and the product shall not be sprayed directly on the screen. The product should pass the LCD production line test and have the qualification to be used in the LCD production line.

4. The most important thing is that there is no corrosive effect on electronic products, because this product is used in IT products, you must not use a cloth and paper towel to wipe the LCD screen, because as long as there is a little small particle, it may damage the protective film of the LCD.