What should I do if the backgammon phone is flooded and the headset is connected

1. Drop into clean water when the power is on;

2. In the case of power failure, it falls into non-corrosive liquid;

3. Fall into non-clean water when energized, or corrosive liquid or viscous liquid or other unclean liquid regardless of whether it is energized or not.

Let me give you some of my personal advice for each situation:

1. Drop into clean water when the power is on, this situation generally does not need to be disassembled.

1.Turn off the power as soon as possible.

2.Shake it dry, but don't shake the machine off, the idea is to shake the water out of the screen. If there are water droplets left on the screen, there will be traces after drying.

3.Place under a slight heat source such as a desk lamp or spotlight to let the moisture slowly dissipate. This process takes more than six hours. Do not use a strong heat source such as a hair dryer in a hurry. Blow it and it's over.

After these three steps of processing, the power supply can basically work normally.

2. Drop into non-corrosive liquid in the case of power failure.

1.Shake it dry, but don't shake it off.

2.If there is no trace on the LCD screen, it shall be processed according to Article 3 of the first point.

3.If there is something left on the screen and it is very serious, do not deal with it according to point 1, paragraph 3, because although the electronic circuit can work normally, the screen may be quite ugly. It can be sent to the nearest maintenance department for processing or dismantling the machine for cleaning by yourself.

If you have poor hands-on ability, you should still repair it for a professional).

3. Falling into non-clean water when the power is on, or falling into corrosive liquid or viscous liquid or other clean liquids regardless of whether the power is on or not.

1.Turn off the power as soon as possible.

2.If you fall into a corrosive liquid (e.g. seawater), rinse the machine with clean water immediately. Or immerse the machine in clean water and try to dilute the corrosive liquid inside.

3.Disassemble the machine as soon as possible. But take your time when disassembling the machine.

4.Rinse with alcohol or professional washing water.

5.Assembling. Or take the whole pile of what you took apart and hand it over to the repair point. Let the repair point clean and assemble it again for you.

Dry your phone before using it, otherwise you will be waiting to change your phone.

If you are using a Huawei phone, it is recommended that you turn off your mobile phone and bring the relevant proof of purchase to a nearby Huawei customer service center for maintenance. You can check the address of a nearby Huawei Customer Service Center on the Huawei website.

Precautions after water and liquid ingress in the mobile phone:

1.Do not move or shake your phone frequently after water is ingress to avoid moisture spreading inside the phone.

2.Do not use a hair dryer or bake at high temperatures (including microwave heating) after water is in, to avoid liquid being blown into the phone and the heat damaging the phone.

3.Mobile phones are made of delicate electronic components, and there is a potential risk after water ingress, so please keep your phone turned off.

4.If you don't have a backup of your data, there may be a risk of data loss during repairs. After you go to the Huawei Customer Service Center, you can consult with a staff member to help you evaluate whether you can back up your data.

1. Please try to place your phone in a dry and ventilated place and use a paper towel to blot the water stains on the surface of your phone. 2. If the phone is turned on, press the power button to turn it off; If your phone is turned off, don't try to turn it on. 3. Please take out the SIM card and microSD card.

4. Take your phone to a Huawei customer service center as soon as possible to avoid unnecessary losses.

vivo phonesAbnormal function due to water ingressIt is recommended to bring a mobile phoneGo to the local vivo after-sales service center for testing and processingSteps:

1. Enter the settings on the standby desktop.

3. Service outlets.

4. Select the province or city where you are located to inquire about the address of the after-sales service center.

Note: You can call ** first to confirm the after-sales working hours and plan the itinerary reasonably.

Gently use a cotton swab or something like that, soak up the water, and let it sit for a while before using it.

If you enter the line version. It will cause a short circuit, which will affect the headphone jack or mobile phone.

Turn off the power, of course, instead of pressing the power off button, remove the battery. Because as soon as you press the shutdown button, the mobile phone will be powered on, and it is likely that a short circuit will occur, causing damage to the mobile phone, and it will be sent for repair as soon as possible. If the warranty period of the phone has expired and you don't want to send it for repair, you can take the phone apart, wipe the parts of the phone with facial tissue, blow it with a hair dryer for a few minutes, and air dry the phone for a few more days before you can turn it on again.

Hello, I have the same situation as you, how did you solve it? -_

1. In this case, the micro switch in the headphone jack was broken after the mobile phone was flooded, causing the mobile phone to become a headphone mode.

2. There is no way to solve such a situation by yourself, and you need professionals to help solve such a problem.

3. It is recommended to get the after-sales service outlets of the mobile phone brand for testing, repair or replace the new headphone jack and other matters.

The mobile phone is the same except for the sports type, take off the card and battery, air dry naturally, and then some can continue to be used, and some will be sent to repair the phone.

Don't turn on the machine after entering the water, the opening will cause damage to the circuit board, first take off the battery, air dry it in a ventilated place, it is best not to put it in the sun, exposure will damage the screen, you can also use a hair dryer to dry, but don't be too hot wind, the battery after water has been damaged life, so you want to replace the battery, if you can't turn it on, you can only repair it, don't disassemble it yourself, good luck.

Many people think that the mobile phone is broken, but in fact, there is no need to repair it, and it is good to use it at home.