The new electric fan on the computer has a lot less aluminum than the old one, will not impress the

Main problem: I don't know what you have to do with an aluminum fan. First of all, for the choice of cooling fan, the most important thing is the bearing of the fan, the bearing is divided into oil-impregnated bearings, double ball bearings, rifle bearings, fluid protection system bearings, hydraulic bearings, vaporization bearings, magnetic levitation bearings, the performance of the bearing is high before and after, followed by the number of revolutions, size, noise, power consumption of the fan, the "aluminum fan" fan page is aluminum.

So if the bearing is broken, can the simple sash still work? I don't know if it's a DIY enthusiast, the choice of cooling fan is mainly performance and practicality, followed by beauty.

Supplementary question: What you said about you changed the CPU, first of all, it is not your motherboard that supports it, the most important thing to consider is the power supply, because you have changed the CPU with a high frequency, and the power consumption of the CPU to the power supply has also increased, it is recommended to replace a power supply rated at 200W+.

Hope the above can solve your problem.

The landlord said that the motherboard model can tell you if you can change the CPU, secondly, the computer black should be the fan heat dissipation is not timely, it is estimated that it is the fan problem, what brand of radiator did you buy? It is recommended to buy a good one for about 100 yuan!

The aluminum composition of the fan has no direct impact on heat dissipation,,You change the CPU,As long as your motherboard is AMD platform supports Shuanghai, you can use it,,Haha, I hope it can help you。

To tell the truth, the current CPU cooling fan is worse than before (except for the high-end), as for whether there is any impact on the performance of the machine, you can test the temperature of the CPU and the speed of the fan after installation** test software like the optimization master, if the temperature and speed are ideal, there is no need to care too much.

The 3450 is very poor. It doesn't heat up much, so there's no problem if you don't need a fan.

First of all, it's not an aluminum sheet, it's a nickel-plated copper sheet.

The choice of heat sink depends on the power consumption of the CPU itself.

The higher the power consumption of the CPU, the better the heatsink needs to be configured. Aluminum heatsinks are generally only suitable for low-power CPUs.

That one is called a heat pipe, and of course the one with a heat pipe is better than the pure fin one.

Of course, it is better to add copper pipes than not to add copper pipes, and there is no need to add copper pipes if the heat is not high.

The so-called computer type only comes with a chip, which can realize many functions, such as timing to turn on and off, automatically adjust the air volume, etc.

Mechanics are much simpler. However, it is cheap and durable.

Yes. Rapid replacement.

Very cheap. will cause a shock.

There is a risk of damage to other parts.

It didn't matter, but the wind was a little lighter.

Yes It will make a noise slowly.

Let's change the fan when it rings.

Is it the fan of this book?,The fans of this book are automatically adjusted according to the temperature of the CPU.,It's not as fast as possible.,Slow rotation,It means that your CPU temperature is low.,It's no big deal.,Normal use,

The CPU will generate a lot of heat when it is working, and the thermal conductivity of aluminum is good, and the use of aluminum as a heat sink plus a fan is mainly for heat dissipation.

The aluminum sheet is used to dissipate heat from the CPU, and the fan is used to allow the aluminum sheet to better dissipate the temperature, so that the CPU can work at a lower temperature. Any electronic component has a high temperature limit, otherwise it will burn the component when it reaches a certain temperature.

Cool the CPU!

Aluminum block + fan = radiator.

The semiconductor resistance is large, the resistance is large, the heat is large, and the heating is large.

If the heat dissipation is not good, it is recommended that you send it for repair and disassembly to clean the fan.

Remove the board from the chassis and blow it against the motherboard.

Blow the inside of that fan, anyway, there will be no dust in all places If it can help you, I hope you will get a good review when you adopt it!!

It's not about blowing that side, if you want to save money, just remove both sides of the case and blow it But you'd better not put water and drinks next to it, or you'll regret that you didn't have a few more hands out.

Just blow it on the host, the effect is very good, and mine will blow it with a fan after a long time.

If it is a test machine, open the cover plate on the side of the CPU fan and blow directly at the CPU.

Open the side case covers, blow the sides, and blow elsewhere is useless.