-
Many people who take the second-level construction engineer examination pay attention to the registration after obtaining the practice qualification certificate, and they are very proud after the registration certificate is in hand. However, I heard that the policy was adjusted, and there will be no paper certificate in the future, so I consulted: Is the registration certificate of the second-level constructor electronic?
Some provinces and cities have implemented the electronic use of second-level constructors.
According to the relevant documents, there have been some areas to carry out the electronic pilot of the registration certificate of the secondary constructor, such as Shaanxi, Sichuan, Jiangsu, in these areas for the registration of the secondary constructor certificate, will no longer be issued a paper registration certificate, but have a first-class electronic certificate.
Electronic certificates have the same validity as paper certificates.
According to the spirit of the documents issued by the relevant departments, the electronic certificate and the paper certificate are the same or effective, the administrative departments of housing and urban-rural construction in the real-name system, enterprise qualification license, project bidding, construction permit, project quality and safety supervision, law enforcement supervision and inspection, completion acceptance and filing and other work, are to recognize the electronic certificate.
Electronic certificates will gradually replace paper certificates.
In regions where electronic registration certificates are enabled, the issuance of paper registration certificates will be discontinued, but previously issued paper certificates will continue to be used for the duration of their validity period. In the future, after the holder handles the initial registration, change of registration, and renewal of registration business, the electronic certificate will be reissued, and the electronic certificate will be fully realized gradually.
Advantages of e-certificates.
In addition to improving the efficiency of the management department, the electronic certificate can also save the cost of printing and mailing, and the certificate holder does not have to waste a lot of time to handle and receive the certificate. It is also very convenient in terms of verification management, they can check the certificate at any time, and verify the certificate by inquiring or scanning the certificate through **, the public, which helps to strengthen the credit management of the certificate holder.
-
On the computer client: please log in to the official website of the Integrated Service Center, "Office Hall - Electronic Certificate - Personal **Entrance", after entering, select the type of personal certificate you need, after the selection is completed, click "Certificate**" in the upper right corner of the certificate, you can ** to the computer and print.
-
In 2020, the registration of Hubei second-level constructors will be electronic, and the online declaration will be adopted, which is truly zero running.
-
When will I receive the 2019 Class 1 Constructor Certificate? Can I register in advance before I get my license?
-
On March 18, 2020, the Chinese Personnel Examination Network opened the 2019 first-level construction engineer electronic certificate inspection portal.
-
The registration of first-class constructors is based on the China Constructor Network - Registered Constructor Management Information System.
According to the issuance of certificates over the years, the paper version of the 2019 national first-class constructor certificates in various regions is expected to be issued from April 2020.
The electronic version of the national 2019 first-class construction engineer qualification certificate has the same legal effect as the paper certificate. You can go to the "China Constructor Network" to register for the certificate.
Since the information of qualified personnel of the first-class constructor in 2019 has not yet been put into the database, the initial registration will be declared after the data import of the relevant departments. In previous years, the data import was completed around the end of April.
-
You can do it in the builder management system.
-
The steps of the second-level construction engineer electronic certificate** are very simple, first log in to the Chinese personnel examination website, select the qualification certificate, and click on the certificate split history pure query verification. Then select the card holder to inquire and enter the username, password and verification code. Finally, read and agree to the service instructions, check the certificate information, and click **.
1. Log in to the "Chinese Personnel Examination Network" or "Local Personnel Examination Network".
2. Select the "Qualification Certificate" column.
3. Click on the "Certificate Query and Verification" option.
4. Continue to click on the "Licensed Personnel Inquiry" option.
5. Enter the user name, password and verification code of the queryer and log in.
6. Read and agree to the service instructions.
Advantages of the second construction of electronic certificates:
Say goodbye to "fake certificates" and make it more convenient and safe to use. An electronic certificate contains the name of the certificate, personnel information, issuing authority, electronic signature and ***, which can be scanned at any time to verify the authenticity, effectively eliminating false testimony and false evidence.
Employees can print the certificate at any time according to their needs, and they can get the certificate after passing the examination, and the change will take effect immediately, and there is no longer any need to run errands back and forth, which solves the problems of difficult storage, troublesome reissuance, and even "pressure certificate" of enterprises. Save the cost of candidates and improve the gold content of the second construction certificate.
The implementation of electronic certificates will allow candidates not to go to relevant departments to handle them, simplify the procedures, and save candidates' time and economic costs, which is also an important breakthrough in the implementation of the reform of "delegating power, delegating power, delegating power, and providing services", and truly realizing the purpose of facilitating and benefiting the people.
On the other hand, the real-time supervision of electronic certificates has also curbed a series of illegal behaviors that are not conducive to the holders of the second construction certificate to a certain extent, such as "misuse of miscellaneous certificates", and further improved the gold content of the second construction certificate.
-
The electronic certificate of the second-level constructor is on the local personnel examination network or the Chinese personnel examination network**, and the electronic certificate of the second-level constructor has the same legal effect as the paper certificate. Qualified personnel can print the electronic certificate of the second construction by themselves after the local notice of collection is issued.
The address of the second-level constructor electric tank search sub-certificate** is Chinese Personnel Examination Network, candidates can log in to the Chinese Personnel Examination Network, select the qualification certificate column, click on the certificate inquiry verification, and click **pdf version of the second construction electronic certificate.
1. Log in to the "Chinese Personnel Examination Network" or "Local Personnel Examination Network".
2. Select the "Qualification Certificate" column.
3. Click on the "Certificate Query and Verification" option.
4. Continue to click on the "Licensed Personnel Inquiry" option.
5. Enter the user name, password and verification code of the queryer and log in.
Tips: Due to the continuous change and adjustment of the examination policy and content, the above information provided by this ** is for reference only2019 Level 2 Constructor Regulations Exam Pre-exam Mock Test Question 1.
Format: PDF Size:
If you have any questions about the qualification exam, don't know how to take the test center, and don't know the local policy of letting you apply for the exam, click on the bottom to consult the liekao website and get the review materials for free.
-
1. Log in to the "Chinese Personnel Examination Network or the Local Personnel Examination Network".Find the "Qualifications" section and click on it
2. Click the entry point on the "Certificate Query and Verification" pageSelect the "Licensed Personnel Query" option;
3. Fill in my username, password and verification code and log in and enterRead and agree to the Terms of Service
Class II Constructor Certificate Registration Process.
1. Log in to the personal version of the "Secondary Constructor Registration Management System", click "Register" and enter your personal information
2. Log in to the above system with a password and fill in your real information and informationIt is best to fill in the information of the two engineering projects you have participated in
3. Insert the enterprise password lock to be registered, and log in to enter the enterprise version of the "Secondary Constructor Registration Management System", and report after agreeing
4. The ** on the barcode shall be printed and stamped and signed, and handed over to the competent department.
5. Use the file bag to pack the relevant paper materials and submit them to the competent department, including the application form, the copy of the enterprise qualification certificate, the copy of the practice qualification certificate, the copy of the graduation certificate of the certificate holder, the copy of the second-generation ID card of the certificate holder, the copy of the employment contract signed by the candidate with the unit, and the one-inch two-inch certificate.
The time of registration review is generally about half a year after the issuance of the certificate, and the registration of the second-level constructor does not need to be carried out in accordance with the above process after the certificate expires.
-
The registration of a Class II Constructor requires the Initial Registration Application Form for a Registered Constructor; Copies of qualifications, academic certificates and identity certificates; A copy of the employment contract signed between the applicant and the employing unit or other valid supporting documents.
According to Article 11 of the Regulations on the Administration of Registered Constructors, the initial registrant may apply within 3 years from the date of issuance of the qualification certificate. Those who fail to apply within the time limit must meet the requirements of continuing education in the major before applying for initial registration. To apply for an initial registration, you need to submit the following documents:
1) Application Form for Initial Registration of Registered Constructors;
2) Copies of qualification certificates, academic certificates and identity certificates;
3) A copy of the employment labor contract signed between the applicant and the employing unit or other valid supporting documents;
4) If the application for initial registration is overdue, the supporting materials for meeting the requirements for continuing education shall be provided.
-
Hello: The registration process is like this:
Preliminary examination materials: 1Application Form for Initial Registration of Constructor II;
2. Copies of qualification certificates, ID cards, and academic certificates;
3. A copy of the labor contract of the employing unit or a certificate of labor, personnel and wage relations issued by the applicant's enterprise;
4. If the initial registration is overdue, a copy of the proof of meeting the requirements of continuing education shall be provided;
5. If you apply for multi-professional registration at the same time, you should also submit a copy of the "Certificate of Passing the Examination of the Professional Category of Constructors".
Preliminary examination criteria: 1. Review whether the enterprise registration information is reported;
2. Whether the information provided (ID card, graduation certificate, labor contract) is consistent with the original.
Time limit for preliminary examination: 10 working days.
2) Review and publicity: The main body of the review is the exclusive window of the administrative comprehensive service hall of the Municipal Housing and Urban-Rural Development Commission; The main body of publicity is the registration center.
Review materials: 1. Application Form for Initial Registration of Class II Constructor;
2. District and county audit opinion form;
3 Summary table of districts and counties.
Review criteria: 1. Check whether the review materials are complete;
2. Check whether the application materials need to be stamped with the official seal of the enterprise are complete;
3. Check whether the data of the district (county) housing and urban-rural development committee is submitted;
4. Check whether the signature and seal office of the Housing and Urban-Rural Development Committee of the district (county) in the application form is signed and sealed;
5. Apply for highway engineering, water conservancy and hydropower engineering to transfer the information to the registration center.
Publicity: The registration center will summarize and publicize the qualified personnel for review.
Time limit for completion: 10 working days.
3) Announcements, certificates and seals.
After the publicity has no objection, the registration center will issue a qualified announcement, release the number of the initial registered qualified personnel, and transfer it to the administrative comprehensive service hall to make a certificate, and at the same time transmit the seal making data to the seal company.
The materials transferred to the certificate making area are: "Beijing Second-level Constructor Initial Registration Certificate Production Approval Form", blank certificate, and announcement list.
-
1) Application Form for Initial Registration of Registered Constructors;
2) Copies of qualification certificates, academic certificates and identity certificates;
3) A copy of the employment labor contract signed between the applicant and the employing unit or other valid supporting documents;
4) If the application for initial registration is overdue, the applicant shall provide proof of meeting the requirements for continuing education;
-
(1) Initial registration requires documents provided by the individual.
a.Identity card.
b.Academic certificates.
c.Practicing License.
d.The dismissal certificate of the applicant unit (this is not necessarily, some places do not have strict requirements, then you do not need the initial certificate, and you can directly ask the affiliated unit if it is needed).
2) The certificate provided by the individual is required for transfer of registration.
a.Identity card.
b.Academic certificates.
c.Practicing License.
d.Practising Seal.
e.Proof of dismissal from the original employer.
3) Does the document provided at the time of registration have to be original?
In most cases, the original certificate is required.
-
Information required for the initial registration of Constructor II.
1. The initial registration application form of registered constructors, a summary table (an additional one-inch color photo shall be attached to the application form) and the corresponding electronic documents (the electronic documents shall be sent to the provincial registration authority through the Internet);
2. Copies of the applicant's qualification certificates, academic certificates and identity certificates;
3. A copy of the employment labor contract signed between the applicant and the employing unit;
4. A copy of the qualification certificate of the employing unit;
5. If you apply for initial registration and apply for multi-professional registration at the same time, you should also submit the original and copy of the certificate of passing the professional category examination of registered constructors;
6. If you apply for initial registration with the qualification certificate of the second-level registered constructor issued by other provinces (municipalities), you shall submit the certificate of non-registration issued by the provincial registration management department of the province.
In other words, you need documents such as certificates of eligibility, academic certificates, copies of ID cards, copies of employment contracts, etc.
-
The second level of the construction engineer has an electronic certificate Zen Xun, the second construction certificate has two kinds of paper certificates and electronic certificates, the electronic certificate needs to be printed by the candidates themselves, and the vertical large paper certificate has the same legal benefits, the second construction electronic certificate is currently only implemented in some provinces, and the rest of the provinces issue paper certificates.
The second-level constructor certificate is of great use for both individuals and enterprises, and is a prerequisite for individuals to serve as project managers, and for enterprises, it is a necessary condition for obtaining corresponding enterprise qualifications.
Constructor II is a professional qualification in the construction category and is a prerequisite for working as a project manager. Professional and technical personnel who have obtained the professional qualifications of first-class constructor and second-class constructor can be recognized as having the title of engineer and assistant engineer, and can be used as a condition for applying for a higher professional title. The certificate is linked to the job title and is a necessary certificate for everyone to be promoted.
In accordance with the Interim Provisions on the Professional Qualification System for Constructors (Ren Fa [2002] No. 111), the Implementation Measures for the Qualification Examination for Constructors (Guo Ren Bu Fa [2004] No. 16) and the Notice on Issues Concerning the Adjustment of Professional Categories Related to Constructor Qualifications (Guo Ren Ting Fa [2006] No. 213) issued by the Ministry of Personnel and the Ministry of Construction, the Compilation Committee of the Construction Engineer Qualification Examination Syllabus was entrusted by the Ministry of Housing and Urban-Rural Development to organize the compilation of the The Syllabus of the Qualification Examination for Class II Constructors" was approved by the relevant experts organized by the Ministry of Human Resources and Social Security. This syllabus includes three subjects: "Construction Management of Construction Projects", "Construction Engineering Regulations and Related Knowledge", and "Professional Engineering Management and Practice" (divided into 6 majors: construction, highway, water conservancy and hydropower, municipal utilities, mining and electromechanical). >>>More
Registered Constructor II can undertake landscaping works of the following scales: >>>More
You can log on to the official website of the local Personnel Examination Institute (Personnel Examination Center), click on the score inquiry window, enter the candidate's ID number and name, and you can check the test results of the current year. Results are usually released about three months after the end of the exam. The passing standard score of the second construction is formulated by the Ministry of Housing and Urban-Rural Development and the Ministry of Human Resources and Social Security, as long as the score reaches 60% of the score is passed, such as, regulations and related knowledge: >>>More
Study method – the preparation process.
First of all, you should formulate a "study time plan" suitable for yourself according to your own situation, and secondly, focus on the key content. >>>More
The validity period of the registration of the second construction engineer practice qualification is generally 3 years, and 3 months before the expiration of the validity period, the holder of the certificate should go to the original registration authority to go through the registration procedures again. If you re-register, you must provide proof of continuing education. >>>More