With racket problems, am I being deceived?!

Shenlong is a brand of Paio set of glue, and there were four sets of rubber named after the dragon at that time, namely.

Hidden dragon inner energy set.

Adhesive surface characteristics: astringency.

Hardness: 36-38 degrees.

Sponge thickness: rubber thickness:

Features: super elasticity, astringent rubber.

Suitable for play: two-sided arc type.

Shenlong inner energy set.

Adhesive surface characteristics: sticky.

Hardness: 40-42

Sponge thickness: rubber thickness:

Features: High elasticity and easy control, strong rotation.

Suitable for play: mid and near the arc circle fast attack type.

The dragon can be set.

Hardness: 40-42 degrees, 42-44 degrees.

Sponge thickness: rubber thickness:

Adhesive surface characteristics: sticky.

Feature: High elasticity and fast.

Type: Suitable for near-stage fast-attack type.

Drunken dragon inner energy set.

Adhesive surface characteristics: sticky.

Sponge hardness: 40-42 degrees, 42-44 degrees.

Sponge thickness: rubber thickness:

Features: Fast**, strong rotation.

Type: Near-platform fast-break arc type.

When it was launched, it was positioned at a grade of about 60 yuan, but then it seemed that there was a collective upgrade, and I don't know about the upgraded rubber **, saying that it was an upgrade, but in fact, it was like CJ8000, which was marked differently according to the hardness of Shenma"version",** On the contrary, it lowers a lot of domineering is in"Upgrades"Later, a 30 yuan version was launched.

If you want to shoot Leo training type, at least you won't lose money, and you should make a little profit.

I hope mine is useful to you, and if you don't understand, you can ask me separately.

The film training type you originally bought, how much is it, Shenlong is fine, there is no deception.

Shenlong made do with it, it's not a lie.

No, the coats are relatively delicate, and Andu is right to use a backhand.

It's better to go to the moving rice ** to buy a novice racket. There are recommendations there. The tempo is changed slowly.

Buy a mass racket, and get used to it when you use it more.

Arc fast play?

The bottom plate is recommended OC, YE, the bottom strength is very good, and it is very suitable for arc circles. (If you take into account the strength, you can use to, but the arc is weaker).

If you don't use a horizontal punch (pull), you can paste a long glue on the back side, and if you hit it horizontally, you can try AK-47.

It's better to use long glue, but it's not allowed to be used now :)

The master does not dare to be. The bottom plate Double Happiness PG3 and Galaxy MC-2 are relatively easy to buy and are suitable for arc circle play.

Forehand Hurricane 3 or 729-08 is the mainstream configuration. The slightly cheaper forehand has the new 729cream, which reflects well and inherits the stickiness of cream. The good backhand is the coat, but the coat is not sticky.

The astringency of the national set has a focus 3, and the sticky has 729-40s, I don't know if LZ likes it or not.

The positive rubber friction is small, suitable for fast attack, and it does not eat and turn.

The long glue particles are long and thin, and they are basically used to cut balls.

For a two-sided arc horizontal shot, consider the Galaxy's MC-2. The cost performance and reputation are very good 5 wood arc ring board (surface material microcrystalline coating).Thicker than it is also the Galaxy E3, the same plywood structure (can also be considered.

It feels more solid. But there is no microcrystalline coating. See which one you prefer).

The forehand configuration is the new 729-2, and the backhand CJ8000 is basically not wrong. Very good configuration within 200.

Use the Galaxy below 200, your situation is more suitable for the bottom plate, you tell the owner of the table tennis shop that he will pick it for you. The backhand recommends that you use Butterfly FX or Donic's F1, both of which are around 150. If you think it's expensive, you can use the bomb sleeve glue, there are more models of bomb sleeve glue, and you can buy a fifty or sixty one that is very easy to use.

If you still think it's expensive, you can use Rio's CJ8000, a cost-effective product. For forehand, 729 is fine, and 39 or 40 hardness is more suitable for you.

Although tile carbon is a carbon board with a good feel, pure wood is really used for arc circles. Why don't you consider STGIA's red and black (7 wood 6 carbon glue) if you like the speed of the material? A speed-type base plate with strong arc performance.

It feels good in the hand. And in terms of cost performance, it is better than tile carbon. Of course this is just personal advice ...

Let's talk about the configuration, the forehand 39 degrees is basically no problem, and the crazy 3 that does not pour glue is recommended to be below 40 degrees. The overall weight of the G666 racket with the backhand is a bit heavy, and the G666 uses a 20 sports sponge (no lighter than the Mad 3 after eating full of glue). In fact, G666 itself is a good offensive sticky sleeve, which should be equipped with a forehand (I don't know who said about the backhand, in fact, such a set of rubber with backhand performance can not be played, and it will be wasted) The backhand suggested sriver-fx or the 729 focus 3 of the national set, this match is much more reasonable than the original.

PS: STIGA red and black can also use this configuration, and the forehand maniac 3 who likes sticky rubber drag ball spinning can use G666 instead. At present, Double Happiness is the most sticky G666.

Question added:Dornick has a wordless version I really haven't heard of.,It's the same as the minimum structure of the general version.,It's recommended to buy the general version.,Buy a rest assured.。 It's like what yeo wordless version of I never read. Fancy things.

Although inorganic tile carbon is said to be a carbon plate, it is a structure of deeply buried carbon, that is to say, the fiber layer is located on both sides of the large core, so it cannot be completely hit to the carbon layer when the force is small, and the role of the carbon layer can only be exerted when the force is large, so a beat is not very hard overall.

Lao Wa used this racket at the end of his career, but it was jo on both sides

It is recommended that you choose a slightly harder forehand, if you say 40 degrees, of course, if you don't usually pour glue, 39 degrees of provincial madness is also a good choice, of course, this will significantly reduce the efficacy of provincial madness. The backhand is recommended to use a relatively soft elastic rubber,G666 may be a little harder,Yunhai sponge is not so easy to penetrate,If the budget is not very tight, the backhand is recommended to use platinum jo,Pull and play are OK,The national set can use HK1997 or the hero of the world.

That plate is a force-type plate, and it is not cost-effective.

The backhand is intended to use Nitaku's Zini, or the Dornik F1 G666 has a high hardness and the national backhand is not as good as the jacket, especially in the holding phase.

The backhand can be exchanged for Donic's F1, and the other matches are not bad.

The baseboard is not very suitable for arc play. The glue of the positive glove is generally 1 to 2 degrees harder than the backhand, and 40 is appropriate.

Some people say that the quality of the wordless version is better than the ordinary version, and I won't say it if I haven't used it.

Forehand or use Wild Soar 3! 39 degrees, G666's 39 degrees can also be, one of its outstanding features is that the viscosity is large, the stability is good, but the lethality is not as big as the Wild Biao 3, I just used the G666 for three years, and then changed to the Crazy Biao, and the strength has also gone up a level, really! As for the backhand, it is strongly recommended to use the butterfly siver-el, of course, it is more than many meters, if you are a little shy in the bag, you can use the ci8000 of the shooting Leo, but the one that wants a Japanese sponge, it is not bad, refer to it, it will make you play happily.

The playing style based on the control of the table?? What a rarity! The forehand recommends you two models: 1. Double Happiness G666 has a sticky surface, good control, strong rotation, and can rub out a very rotating ball!

The fourth generation of ultimate internal energy (burst arc type). A product that I personally love. It combines the characteristics of domestic rubber sleeve and imported rubber sleeve - the surface of the rubber sleeve is sticky, and the sponge is made in Germany and is very soft.

Pretty good control of the ball. With a harder base plate (or carbon plate), the attack is full of power!!

The backhand is a little cheaper, and about 30 yuan is about the same!

Yasaka Extra is a five-layer pure wood structure, his strength is the control of the stage and the arc circle, you use the crazy 3 on the forehand is very good, but to choose a good degree, it is recommended to use 41 degrees to exert force, 39 degrees to exert force, 2 or 3 times to play glue, in order to exert the power of the hurricane, the backhand with CJ8000C type is the best.

I suggest that you use a softer rubber 729 or something like that for your forehand, and you can use Mad 3 if you want to burst on the reverse side

G666 I've used, it's not good, it's not flexible, it's not well controlled, it's available crazy two, it's very powerful.

The viscosity of G666 is not big at all, and I personally feel that it is very hard, too elastic, and difficult to control.

I think your glue is a waste of points. That 729sst backhand is too wasteful. This glue is on the forehand. I can wear beauty with Hurricane. A backhand dip in a CJ8000 will do.

Everyone has their own habits.

You know a lot, I'm busy watching it, hey, they're all masters.

It's a bit of a waste. And you like to be close to the stage, and you always feel a little incongruous.

If you're strong enough, use Stika EG! Enough strength, the batting sweet area is large, and the ball pulled out has the effect of whipping! Forehand madness 2, backhand F1, if F1 is too expensive, the domestic 'super energy' is also good!

If you're arguing, it's just the 'Primorac' carbon that erects a butterfly! The rubber configuration is the same!