What is the main purpose of the cutting disc

The main function of the cutting disc is to cut things, such as ultra-thin cutting discs are used to cut precision diamonds, gemstones, fine ceramics, LED substrates, electronic component pins, circuit boards, and other industries can be used, and larger, it can be used to cut horse routes, marble, flower steel stones, rocks and other cutting discs. It depends on what industry you use, at present, all walks of life need to use ultra-thin cutting discs, there are several kinds of cutting discs, cutting non-metals to use ultra-thin cutting discs of diamond, cutting metals to use cubic boron nitride and other hard substances of cutting discs to cut.

The cutting disc is made of glass fiber and resin as a reinforced bonding material, with high tensile, impact and flexural strength, and is widely used in the production and cutting of ordinary steel, stainless steel metal and non-metal, excellent materials and exquisite craftsmanship ensure the high cutting efficiency and the best economic effect of different material workpieces.

According to the material, the cutting disc is mainly divided into fiber resin cutting disc and diamond cutting disc.

1.The resin cutting disc is made of resin as the binder, with the glass fiber mesh as the muscle, combined with a variety of materials, and the cutting performance is particularly significant for difficult-to-cut materials such as alloy steel and stainless steel. Dry and wet cutting methods make the cutting accuracy more stable, and at the same time, the selection of the material and hardness of the cutting disc can greatly improve your cutting efficiency and save your production costs.

2.Diamond cutting disc is a kind of cutting tool, which is widely used in the processing of hard and brittle materials such as stone, concrete, prefabricated slabs, new and old roads, ceramics, etc. The diamond cutting disc is mainly composed of two parts; Base body and bit.

The base body is the main supporting part of the bonded cutter head, and the cutter head is the part that cuts in the process of use, the cutter head will be continuously consumed in use, and the matrix will not, the reason why the cutter head can play the role of cutting is because it contains diamond, diamond as the hardest substance at present, it rubs and cuts the processed object in the cutter head. The diamond particles, on the other hand, are encased in metal inside the cutter head.

The green cutting disc is mainly used for cutting alloy steel, stainless steel and other metal parts.

The green cutting disc, that is, the resin cutting disc, is made of resin as a binding agent, with glass fiber mesh as the bone, combined with a variety of materials, and the cutting performance is particularly significant for alloy steel, stainless steel and other difficult-to-cut materials. Dry and wet cutting methods make the cutting accuracy more stable, and at the same time, the selection of the material and hardness of the cutting disc can greatly improve the cutting efficiency and save production costs.

Precautions for storage and use of resin cutting discs:

1. The cutting disc must be handled carefully to prevent collision and cracking!

2. When the cutting piece is stored, it should be moisture-proof, anti-freeze and anti-deformation, and the cutting piece should be flat on the wooden pallet or wooden frame, and the stacking height is generally not more than meters!

3. The storage time of the resin cutting disc is one year, and the rotary inspection should be re-carried out after the time is exceeded, and it can only be used after confirming that it is qualified!

4. When the cutting disc is installed on the angle grinder, the flange surface in contact with the cutting disc is required to be clean and flat, and the tightening of the cutting disc is required to be moderately tight, and only special wrenches are allowed to be reinforced, and supplementary fixtures (such as extension wrenches, etc.) are prohibited to prevent artificial injury to the abrasives!

5. The speed of the cutting disc can not exceed the working line speed specified by the cutting disc trademark, and when using the pneumatic grinder, it is necessary to prevent the air pressure from being unstable, resulting in the cutting disc exceeding the maximum speed!

6. When using the cutting disc, it is easy to stop, get stuck and break the cutting disc, if it is stuck, the cutting disc should be lifted immediately to avoid the burning or breaking of the cutting disc!

7. The cutting disc is only allowed to be installed and used in a single piece, and it is strictly forbidden to install and use two or more pieces at the same time!

8. Resin cutting discs are only allowed to be used for cutting, not for grinding!

9. The equipment used in the cutting disc shall comply with the GB4674 grinding machinery safety regulations!

10. Users should comply with GB2494 abrasive safety rules when using cutting discs!

To put it simply, the common definition of a green cutting disc is a sharp cutting blade. Generally cut stainless steel material, sharp but not durable. In fact, the color of the saw blade is only a pigment added during the production process, and it has nothing to do with the actual quality of the saw blade.

The green cutting disc is used to cut the stone.

Specifications: 400*, 350*, 300*, 250*2*25, 180*3*22, 150*3*22, 125*, 100*, 125*, 107*

1. Introduction of cutting discs:

Cutting discs are thin slices made of abrasives, binder resins, etc., which are used for ordinary steel, stainless steel, metallic and non-metallic materials, which belong to grinding wheels.

2. Uses: The use of glass fiber and resin as reinforcing materials, with high tensile strength, impact resistance and bending strength, widely used in the production of ordinary steel, stainless steel metal and non-metal, excellent materials, exquisite technology to ensure the high cutting efficiency and the best economic effect of different material workpieces.

Saw blades generally refer to marble, wood. The cutting disc is generally iron.

The normal cutting disc is 15-18-22 specification, and there are also large cutting discs that cut the road.